[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <41cdb992-8387-80db-5d48-4d16c85cb14a@redhat.com>
Date: Fri, 28 Jul 2017 09:42:21 -0700
From: Laura Abbott <labbott@...hat.com>
To: Tom Bogendoerfer <tsbogend@...ha.franken.de>
Cc: isubramanian@....com, kchudgar@....com, qnguyen@....com,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net] xgene: Don't fail probe, if there is no clk resource
for SGMII interfaces
On 07/28/2017 07:23 AM, Tom Bogendoerfer wrote:
> On Thu, Jul 27, 2017 at 03:39:58PM -0700, Laura Abbott wrote:
>> I don't know the intricacies of the Mustang hardware but external
>> aborts have been a symptom of missing clocks on other hardware.
>
> you are right, it's a missing clock. For SGMII ports the driver
> doesn't really use the clock source other then doing the one
> devm_clk_get(), but this is enough to get the clock going.
>
> Below patch fixes the crash and brings back the second SGMII port
> (even without a clock source in device tree, I guess it uses clock
> from first port). From a correctness standpoint there should probably
> be a clk_prepare_enable(), if port is SGMII.
>
> Could you test the patch ? If it works, I'll submit it.
>
> Thomas.
>
> diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
> index 86058a9f3417..1d307f2def2d 100644
> --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
> +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
> @@ -1785,9 +1785,9 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
>
> xgene_enet_gpiod_get(pdata);
>
> - if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) {
> - pdata->clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(pdata->clk)) {
> + pdata->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(pdata->clk)) {
> + if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) {
> /* Abort if the clock is defined but couldn't be
> * retrived. Always abort if the clock is missing on
> * DT system as the driver can't cope with this case.
>
Yes, this works. You can add my Tested-by.
Thanks,
Laura
Powered by blists - more mailing lists