netdev - Re: [PATCH net-next v4 02/10] devlink: Adding SR-IOV enablement perm config param

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20171028071742.GB1980@nanopsycho.orion>
Date:   Sat, 28 Oct 2017 09:17:42 +0200
From:   Jiri Pirko <jiri@...nulli.us>
To:     Steve Lin <steven.lin1@...adcom.com>
Cc:     Linux Netdev List <netdev@...r.kernel.org>,
        Jiri Pirko <jiri@...lanox.com>,
        "David S . Miller" <davem@...emloft.net>,
        Michael Chan <michael.chan@...adcom.com>,
        John Linville <linville@...driver.com>,
        Andy Gospodarek <gospo@...adcom.com>,
        Yuval Mintz <yuvalm@...lanox.com>
Subject: Re: [PATCH net-next v4 02/10] devlink: Adding SR-IOV enablement perm
 config param

Fri, Oct 27, 2017 at 11:30:06PM CEST, steven.lin1@...adcom.com wrote:
>On Fri, Oct 27, 2017 at 5:06 PM, Jiri Pirko <jiri@...nulli.us> wrote:
>> Fri, Oct 27, 2017 at 10:54:06PM CEST, steven.lin1@...adcom.com wrote:
>>>Adding DEVLINK_PERM_CONFIG_SRIOV_ENABLED permanent config
>>>parameter.  Value is permanent, so becomes the new default
>>
>> Avoid the double space.
>
>Ok.
>
>>
>>
>>>value for this device.
>>>
>>>  DEVLINK_PERM_CONFIG_DISABLE = Disable SR-IOV
>>>  DEVLINK_PERM_CONFIG_ENABLE  = Enable SR-IOV
>>>
>>>Signed-off-by: Steve Lin <steven.lin1@...adcom.com>
>>>Acked-by: Andy Gospodarek <gospo@...adcom.com>
>>>---
>>> include/uapi/linux/devlink.h | 14 +++++++++++++-
>>> net/core/devlink.c           |  1 +
>>> 2 files changed, 14 insertions(+), 1 deletion(-)
>>>
>>>diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
>>>index b3a0b2a..9a41f6e 100644
>>>--- a/include/uapi/linux/devlink.h
>>>+++ b/include/uapi/linux/devlink.h
>>>@@ -256,8 +256,20 @@ enum devlink_dpipe_header_id {
>>>       DEVLINK_DPIPE_HEADER_IPV6,
>>> };
>>>
>>>-/* Permanent config parameters */
>>>+enum devlink_perm_config_enabled {
>>>+      DEVLINK_PERM_CONFIG_DISABLE,
>>>+      DEVLINK_PERM_CONFIG_ENABLE,
>>>+};
>>>+
>>>+/* Permanent config parameters:
>>>+ * DEVLINK_PERM_CONFIG_SRIOV_ENABLED: Configures whether SR-IOV PCI capability
>>>+ * provided by device.
>>
>> I don't understand the sentense :/
>
>It means that this parameter controls whether the device advertises
>SR-IOV PCI capability -- perhaps I should say "advertised" rather than
>"provided"?  Ok, will do that...

I'm missing "is" most probably.

>
>>
>>
>>>+ *   DEVLINK_PERM_CONFIG_DISABLE = disable SR-IOV
>>>+ *   DEVLINK_PERM_CONFIG_ENABLE  = enable SR-IOV
>>
>> These comments should be at the enum values, not here.
>
>Ok.
>
>>
>>
>>>+ */
>>> enum devlink_perm_config_param {
>>>+      DEVLINK_PERM_CONFIG_SRIOV_ENABLED,
>>>+
>>>       __DEVLINK_PERM_CONFIG_MAX,
>>>       DEVLINK_PERM_CONFIG_MAX = __DEVLINK_PERM_CONFIG_MAX - 1
>>> };
>>>diff --git a/net/core/devlink.c b/net/core/devlink.c
>>>index a7fa7cc..395c93c 100644
>>>--- a/net/core/devlink.c
>>>+++ b/net/core/devlink.c
>>>@@ -1569,6 +1569,7 @@ static int devlink_nl_cmd_eswitch_set_doit(struct sk_buff *skb,
>>> static const struct nla_policy devlink_nl_policy[DEVLINK_ATTR_MAX + 1];
>>>
>>> static const u8 devlink_perm_cfg_param_types[DEVLINK_PERM_CONFIG_MAX + 1] = {
>>>+      [DEVLINK_PERM_CONFIG_SRIOV_ENABLED] = NLA_U8,
>>> };
>>>
>>> static int devlink_nl_single_param_get(struct sk_buff *msg,
>>>--
>>>2.7.4
>>>