[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <87ind9fpnc.fsf@lechat.rtp-net.org>
Date: Thu, 14 Dec 2017 13:41:11 +0100
From: Arnaud Patard (Rtp) <arnaud.patard@...-net.org>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
netdev@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH] net: stmmac: enable EEE in MII, GMII or RGMII only
Jerome Brunet <jbrunet@...libre.com> writes:
> Note in the databook - Section 4.4 - EEE :
> " The EEE feature is not supported when the MAC is configured to use the
> TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC
> supports multiple PHY interfaces, you should activate the EEE mode only
> when the MAC is operating with GMII, MII, or RGMII interface."
>
> Applying this restriction solves a stability issue observed on Amlogic
> gxl platforms operating with RMII interface and the internal PHY.
I was having the issue on my libretech AML-S905X-CC / potato board. With
this patch, I've not been able to trigger it at all. Without it and with
my test case, I was able to trigger the hang several times reliably.
Any hope to see this merged ?
>
> Fixes: 83bf79b6bb64 ("stmmac: disable at run-time the EEE if not supported")
> Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
Tested-by: Arnaud Patard <arnaud.patard@...-net.org>
Powered by blists - more mailing lists