netdev - [PATCH 2/2] arm: mvebu: 370-rd: Enable PHY interrupt handling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 22 Feb 2018 22:58:33 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     David Miller <davem@...emloft.net>
Cc:     netdev <netdev@...r.kernel.org>,
        Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
        Gregory Clement <gregory.clement@...e-electrons.com>,
        Andrew Lunn <andrew@...n.ch>
Subject: [PATCH 2/2] arm: mvebu: 370-rd: Enable PHY interrupt handling

The Ethernet switch has an embedded interrupt controller. Interrupts
from the embedded PHYs are part of this interrupt controller.
Explicitly list the MDIO bus the embedded PHYs are on, and wire up the
interrupts.

Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
 arch/arm/boot/dts/armada-370-rd.dts | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 8b2fa9a49967..c28afb242393 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -56,6 +56,7 @@
 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
@@ -243,6 +244,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x10>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		ports {
 			#address-cells = <1>;
@@ -278,6 +281,35 @@
 				};
 			};
 		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switchphy0: switchphy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy1: switchphy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy2: switchphy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy3: switchphy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 	};
 };
 
-- 
2.15.1