netdev - Re: [PATCH 0/2] mv88e6xxx: Poll when no interrupt defined

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 23 Feb 2018 12:32:39 -0500 (EST)
From:   David Miller <davem@...emloft.net>
To:     andrew@...n.ch
Cc:     netdev@...r.kernel.org, vivien.didelot@...oirfairelinux.com,
        gregory.clement@...e-electrons.com
Subject: Re: [PATCH 0/2] mv88e6xxx: Poll when no interrupt defined

From: Andrew Lunn <andrew@...n.ch>
Date: Thu, 22 Feb 2018 22:58:31 +0100

> Not all boards using the mv88e6xxx switches have the interrupt output
> connected to a GPIO. On these boards phylib has to poll the PHYs,
> rather than use interrupts. Have the driver poll the interrupt status
> register, which is more efficient than having phylib do it. And it
> enables other switch interrupts to be services.
> 
> The Armada 370RD is such a board without a interrupt GPIO. Now that
> interrupts work, wire up the PHYs to make use if them.
> 
> Gregory: Are you O.K. for the second patch to go through netdev?

I'll wait for Gregory's response before applying this series.