lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Fri, 2 Mar 2018 12:21:49 +0300
From:   Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To:     Moritz Fischer <mdf@...nel.org>, linux-kernel@...r.kernel.org
Cc:     netdev@...r.kernel.org, robh+dt@...nel.org, mark.rutland@....com,
        andrew@...n.ch, f.fainelli@...il.com, davem@...emloft.net
Subject: Re: [RESEND PATCH v4 1/2] dt-bindings: net: Add bindings for National
 Instruments XGE netdev

On 3/1/2018 10:15 PM, Moritz Fischer wrote:

> This adds bindings for the NI XGE 1G/10G network device.
> 
> Reviewed-by: Rob Herring <robh@...nel.org>
> Signed-off-by: Moritz Fischer <mdf@...nel.org>
> ---
> 
> Changes from v3:
> - Added Rob's Reviewed-by
> 
> Changes from v2:
> - Addressed Rob's comments w.r.t to IRQ names and typo
> 
> Changes from v1:
> - Corrected from nixge -> nixge.txt
> ---
>   Documentation/devicetree/bindings/net/nixge.txt | 32 +++++++++++++++++++++++++
>   1 file changed, 32 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/net/nixge.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt
> new file mode 100644
> index 000000000000..e55af7f0881a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nixge.txt
> @@ -0,0 +1,32 @@
> +* NI XGE Ethernet controller
> +
> +Required properties:
> +- compatible: Should be "ni,xge-enet-2.00"
> +- reg: Address and length of the register set for the device
> +- interrupts: Should contain tx and rx interrupt

     Maybe rx and tx, looking below:

> +- interrupt-names: Should be "rx" and "tx"
> +- phy-mode: See ethernet.txt file in the same directory.
> +- phy-handle: See ethernet.txt file in the same directory.
> +- nvmem-cells: Phandle of nvmem cell containing the MAC address
> +- nvmem-cell-names: Should be "address"
[...]

MBR, Sergei

Powered by blists - more mailing lists