netdev - [PATCH net 5/8] bnxt_en: Fix regressions when setting up MQPRIO TX rings.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1520657170-398-6-git-send-email-michael.chan@broadcom.com>
Date:   Fri,  9 Mar 2018 23:46:07 -0500
From:   Michael Chan <michael.chan@...adcom.com>
To:     davem@...emloft.net
Cc:     netdev@...r.kernel.org
Subject: [PATCH net 5/8] bnxt_en: Fix regressions when setting up MQPRIO TX rings.

Recent changes added the bnxt_init_int_mode() call in the driver's open
path whenever ring reservations are changed.  This call was previously
only called in the probe path.  In the open path, if MQPRIO TC has been
setup, the bnxt_init_int_mode() call would reset and mess up the MQPRIO
per TC rings.

Fix it by not re-initilizing bp->tx_nr_rings_per_tc in
bnxt_init_int_mode().  Instead, initialize it in the probe path only
after the bnxt_init_int_mode() call.

Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.")
Signed-off-by: Michael Chan <michael.chan@...adcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 35099c8..cbdb54f 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5857,7 +5857,6 @@ static int bnxt_init_msix(struct bnxt *bp)
 		if (rc)
 			goto msix_setup_exit;

-		bp->tx_nr_rings_per_tc = bp->tx_nr_rings;
 		bp->cp_nr_rings = (min == 1) ?
 				  max_t(int, bp->tx_nr_rings, bp->rx_nr_rings) :
 				  bp->tx_nr_rings + bp->rx_nr_rings;
@@ -5889,7 +5888,6 @@ static int bnxt_init_inta(struct bnxt *bp)
 	bp->rx_nr_rings = 1;
 	bp->tx_nr_rings = 1;
 	bp->cp_nr_rings = 1;
-	bp->tx_nr_rings_per_tc = bp->tx_nr_rings;
 	bp->flags |= BNXT_FLAG_SHARED_RINGS;
 	bp->irq_tbl[0].vector = bp->pdev->irq;
 	return 0;
@@ -8661,6 +8659,11 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		goto init_err_pci_clean;

+	/* No TC has been set yet and rings may have been trimmed due to
+	 * limited MSIX, so we re-initialize the TX rings per TC.
+	 */
+	bp->tx_nr_rings_per_tc = bp->tx_nr_rings;
+
 	bnxt_get_wol_settings(bp);
 	if (bp->flags & BNXT_FLAG_WOL_CAP)
 		device_set_wakeup_enable(&pdev->dev, bp->wol);
-- 
1.8.3.1