| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c2de891a-1ee6-1dd9-fb32-7ca53597c408@mellanox.com>
Date: Thu, 29 Mar 2018 10:42:27 +0300
From: Tal Gilboa <talgi@...lanox.com>
To: Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org
Cc: davem@...emloft.net, jaedon.shin@...il.com, pgynther@...gle.com,
opendmb@...il.com, Michael Chan <michael.chan@...adcom.com>,
gospo@...adcom.com, saeedm@...lanox.com
Subject: Re: [PATCH net-next v2 3/3] net: bcmgenet: Fix coalescing settings
handling
On 3/29/2018 1:15 AM, Florian Fainelli wrote:
> There were a number of issues with setting the RX coalescing parameters:
>
> - we would not be preserving values that would have been configured
> across close/open calls, instead we would always reset to no timeout
> and 1 interrupt per packet, this would also prevent DIM from setting its
> default usec/pkts values
>
> - when adaptive RX would be turned on, we woud not be fetching the
> default parameters, we would stay with no timeout/1 packet per interrupt
> until the estimator kicks in and changes that
>
> - finally disabling adaptive RX coalescing while providing parameters
> would not be honored, and we would stay with whatever DIM had previously
> determined instead of the user requested parameters
>
> Fixes: 9f4ca05827a2 ("net: bcmgenet: Add support for adaptive RX coalescing")
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
> ---
> drivers/net/ethernet/broadcom/genet/bcmgenet.c | 92 +++++++++++++++++---------
> drivers/net/ethernet/broadcom/genet/bcmgenet.h | 4 +-
> 2 files changed, 61 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> index 7db8edc643ec..f8af472f324f 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> @@ -625,26 +625,46 @@ static int bcmgenet_get_coalesce(struct net_device *dev,
> return 0;
> }
>
> -static void bcmgenet_set_rx_coalesce(struct bcmgenet_rx_ring *ring)
> +static void bcmgenet_set_rx_coalesce(struct bcmgenet_rx_ring *ring,
> + u32 usecs, u32 pkts)
> {
> struct bcmgenet_priv *priv = ring->priv;
> unsigned int i = ring->index;
> u32 reg;
>
> - bcmgenet_rdma_ring_writel(priv, i, ring->dim.coal_pkts,
> - DMA_MBUF_DONE_THRESH);
> + bcmgenet_rdma_ring_writel(priv, i, pkts, DMA_MBUF_DONE_THRESH);
>
> reg = bcmgenet_rdma_readl(priv, DMA_RING0_TIMEOUT + i);
> reg &= ~DMA_TIMEOUT_MASK;
> - reg |= DIV_ROUND_UP(ring->dim.coal_usecs * 1000, 8192);
> + reg |= DIV_ROUND_UP(usecs * 1000, 8192);
> bcmgenet_rdma_writel(priv, reg, DMA_RING0_TIMEOUT + i);
> }
>
> +static void bcmgenet_set_ring_rx_coalesce(struct bcmgenet_rx_ring *ring,
> + struct ethtool_coalesce *ec)
> +{
> + struct net_dim_cq_moder moder;
> + u32 usecs, pkts;
> +
> + ring->rx_coalesce_usecs = ec->rx_coalesce_usecs;
> + ring->rx_max_coalesced_frames = ec->rx_max_coalesced_frames;
> + usecs = ring->rx_coalesce_usecs;
> + pkts = ring->rx_max_coalesced_frames;
> +
> + if (ec->use_adaptive_rx_coalesce && !ring->dim.use_dim) {
> + moder = net_dim_get_def_profile(ring->dim.dim.mode);
> + usecs = moder.usec;
> + pkts = moder.pkts;
> + }
> +
> + ring->dim.use_dim = ec->use_adaptive_rx_coalesce;
> + bcmgenet_set_rx_coalesce(ring, usecs, pkts);
> +}
> +
> static int bcmgenet_set_coalesce(struct net_device *dev,
> struct ethtool_coalesce *ec)
> {
> struct bcmgenet_priv *priv = netdev_priv(dev);
> - struct bcmgenet_rx_ring *ring;
> unsigned int i;
>
> /* Base system clock is 125Mhz, DMA timeout is this reference clock
> @@ -680,27 +700,9 @@ static int bcmgenet_set_coalesce(struct net_device *dev,
> ec->tx_max_coalesced_frames,
> DMA_MBUF_DONE_THRESH);
>
> - for (i = 0; i < priv->hw_params->rx_queues; i++) {
> - ring = &priv->rx_rings[i];
> - ring->dim.coal_usecs = ec->rx_coalesce_usecs;
> - ring->dim.coal_pkts = ec->rx_max_coalesced_frames;
> - if (!ec->use_adaptive_rx_coalesce && ring->dim.use_dim) {
> - ring->dim.coal_pkts = 1;
> - ring->dim.coal_usecs = 0;
> - }
> - ring->dim.use_dim = ec->use_adaptive_rx_coalesce;
> - bcmgenet_set_rx_coalesce(ring);
> - }
> -
> - ring = &priv->rx_rings[DESC_INDEX];
> - ring->dim.coal_usecs = ec->rx_coalesce_usecs;
> - ring->dim.coal_pkts = ec->rx_max_coalesced_frames;
> - if (!ec->use_adaptive_rx_coalesce && ring->dim.use_dim) {
> - ring->dim.coal_pkts = 1;
> - ring->dim.coal_usecs = 0;
> - }
> - ring->dim.use_dim = ec->use_adaptive_rx_coalesce;
> - bcmgenet_set_rx_coalesce(ring);
> + for (i = 0; i < priv->hw_params->rx_queues; i++)
> + bcmgenet_set_ring_rx_coalesce(&priv->rx_rings[i], ec);
> + bcmgenet_set_ring_rx_coalesce(&priv->rx_rings[DESC_INDEX], ec);
>
> return 0;
> }
> @@ -1924,10 +1926,7 @@ static void bcmgenet_dim_work(struct work_struct *work)
> struct net_dim_cq_moder cur_profile =
> net_dim_get_profile(dim->mode, dim->profile_ix);
>
> - ring->dim.coal_usecs = cur_profile.usec;
> - ring->dim.coal_pkts = cur_profile.pkts;
> -
> - bcmgenet_set_rx_coalesce(ring);
> + bcmgenet_set_rx_coalesce(ring, cur_profile.usec, cur_profile.pkts);
> dim->state = NET_DIM_START_MEASURE;
> }
>
> @@ -2079,9 +2078,11 @@ static void init_umac(struct bcmgenet_priv *priv)
> dev_dbg(kdev, "done init umac\n");
> }
>
> -static void bcmgenet_init_dim(struct bcmgenet_net_dim *dim,
> +static void bcmgenet_init_dim(struct bcmgenet_rx_ring *ring,
> void (*cb)(struct work_struct *work))
> {
> + struct bcmgenet_net_dim *dim = &ring->dim;
> +
> INIT_WORK(&dim->dim.work, cb);
> dim->dim.mode = NET_DIM_CQ_PERIOD_MODE_START_FROM_EQE;
> dim->event_ctr = 0;
> @@ -2089,6 +2090,25 @@ static void bcmgenet_init_dim(struct bcmgenet_net_dim *dim,
> dim->bytes = 0;
> }
>
> +static void bcmgenet_init_rx_coalesce(struct bcmgenet_rx_ring *ring)
> +{
> + struct bcmgenet_net_dim *dim = &ring->dim;
> + struct net_dim_cq_moder moder;
> + u32 usecs, pkts;
> +
> + usecs = ring->rx_coalesce_usecs;
> + pkts = ring->rx_max_coalesced_frames;
> +
> + /* If DIM was enabled, re-apply default parameters */
> + if (dim->use_dim) {
> + moder = net_dim_get_def_profile(dim->dim.mode);
> + usecs = moder.usec;
> + pkts = moder.pkts;
> + }
> +
> + bcmgenet_set_rx_coalesce(ring, usecs, pkts);
> +}
> +
> /* Initialize a Tx ring along with corresponding hardware registers */
> static void bcmgenet_init_tx_ring(struct bcmgenet_priv *priv,
> unsigned int index, unsigned int size,
> @@ -2178,7 +2198,8 @@ static int bcmgenet_init_rx_ring(struct bcmgenet_priv *priv,
> if (ret)
> return ret;
>
> - bcmgenet_init_dim(&ring->dim, bcmgenet_dim_work);
> + bcmgenet_init_dim(ring, bcmgenet_dim_work);
> + bcmgenet_init_rx_coalesce(ring);
>
> /* Initialize Rx NAPI */
> netif_napi_add(priv->dev, &ring->napi, bcmgenet_rx_poll,
> @@ -2186,7 +2207,6 @@ static int bcmgenet_init_rx_ring(struct bcmgenet_priv *priv,
>
> bcmgenet_rdma_ring_writel(priv, index, 0, RDMA_PROD_INDEX);
> bcmgenet_rdma_ring_writel(priv, index, 0, RDMA_CONS_INDEX);
> - bcmgenet_rdma_ring_writel(priv, index, 1, DMA_MBUF_DONE_THRESH);
> bcmgenet_rdma_ring_writel(priv, index,
> ((size << DMA_RING_SIZE_SHIFT) |
> RX_BUF_LENGTH), DMA_RING_BUF_SIZE);
> @@ -3424,6 +3444,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
> struct net_device *dev;
> const void *macaddr;
> struct resource *r;
> + unsigned int i;
> int err = -EIO;
> const char *phy_mode_str;
>
> @@ -3552,6 +3573,11 @@ static int bcmgenet_probe(struct platform_device *pdev)
> netif_set_real_num_tx_queues(priv->dev, priv->hw_params->tx_queues + 1);
> netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1);
>
> + /* Set default coalescing parameters */
> + for (i = 0; i < priv->hw_params->rx_queues; i++)
> + priv->rx_rings[i].rx_max_coalesced_frames = 1;
> + priv->rx_rings[DESC_INDEX].rx_max_coalesced_frames = 1;
> +
Do you still want to keep {usecs,frames}={0,1} as default static
configuration? Is the latency so important for the static case? I'm
assuming RT latency is at least 10us so you can somewhat increase the
timer and counter without causing an increase in latency. This should be
properly tested of course so maybe in a future patch.
> /* libphy will determine the link state */
> netif_carrier_off(dev);
>
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> index 22c41e0430fb..b773bc07edf7 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> @@ -578,8 +578,6 @@ struct bcmgenet_net_dim {
> u16 event_ctr;
> unsigned long packets;
> unsigned long bytes;
> - u32 coal_usecs;
> - u32 coal_pkts;
> struct net_dim dim;
> };
>
> @@ -598,6 +596,8 @@ struct bcmgenet_rx_ring {
> unsigned int end_ptr; /* Rx ring end CB ptr */
> unsigned int old_discards;
> struct bcmgenet_net_dim dim;
> + u32 rx_max_coalesced_frames;
> + u32 rx_coalesce_usecs;
> void (*int_enable)(struct bcmgenet_rx_ring *);
> void (*int_disable)(struct bcmgenet_rx_ring *);
> struct bcmgenet_priv *priv;
>
Reviewed-by: Tal Gilboa <talgi@...lanox.com>
Powered by blists - more mailing lists