netdev - Re: [PATCH 5/7] MIPS: mscc: ocelot: add GPIO4 pinmuxing DT node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180914145446.GQ14988@piout.net>
Date:   Fri, 14 Sep 2018 16:54:46 +0200
From:   Alexandre Belloni <alexandre.belloni@...tlin.com>
To:     Quentin Schulz <quentin.schulz@...tlin.com>
Cc:     ralf@...ux-mips.org, paul.burton@...s.com, jhogan@...nel.org,
        robh+dt@...nel.org, mark.rutland@....com, davem@...emloft.net,
        andrew@...n.ch, f.fainelli@...il.com, allan.nielsen@...rochip.com,
        linux-mips@...ux-mips.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        thomas.petazzoni@...tlin.com, antoine.tenart@...tlin.com
Subject: Re: [PATCH 5/7] MIPS: mscc: ocelot: add GPIO4 pinmuxing DT node

Hi,

On 14/09/2018 11:44:26+0200, Quentin Schulz wrote:
> In order to use GPIO4 as a GPIO, we need to mux it in this mode so let's
> declare a new pinctrl DT node for it.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@...tlin.com>
> ---
>  arch/mips/boot/dts/mscc/ocelot.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
> index 8ce317c..b5c4c74 100644
> --- a/arch/mips/boot/dts/mscc/ocelot.dtsi
> +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
> @@ -182,6 +182,11 @@
>  			interrupts = <13>;
>  			#interrupt-cells = <2>;
>  
> +			gpio4: gpio4 {
> +				pins = "GPIO_4";
> +				function = "gpio";
> +			};
> +

For a GPIO, I would do that in the board dts because it is not used
directly in the dtsi.

>  			uart_pins: uart-pins {
>  				pins = "GPIO_6", "GPIO_7";
>  				function = "uart";
> -- 
> git-series 0.9.1

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com