netdev - Re: [PATCH 4/5] phy: mvebu-cp110-comphy: convert to use eth phy mode and submode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 8 Nov 2018 22:21:23 +0000
From:   Russell King - ARM Linux <linux@...linux.org.uk>
To:     Grygorii Strashko <grygorii.strashko@...com>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Kishon Vijay Abraham I <kishon@...com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Quentin Schulz <quentin.schulz@...tlin.com>,
        Manu Gautam <mgautam@...eaurora.org>,
        Tony Lindgren <tony@...mide.com>, netdev@...r.kernel.org,
        Antoine Tenart <antoine.tenart@...e-electrons.com>,
        Sekhar Nori <nsekhar@...com>, linux-kernel@...r.kernel.org,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        linux-mediatek@...ts.infradead.org,
        Vivek Gautam <vivek.gautam@...eaurora.org>,
        Carlo Caione <carlo@...one.org>,
        linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org,
        Matthias Brugger <matthias.bgg@...il.com>
Subject: Re: [PATCH 4/5] phy: mvebu-cp110-comphy: convert to use eth phy mode
 and submode

On Wed, Nov 07, 2018 at 06:36:16PM -0600, Grygorii Strashko wrote:
> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> index 7a37a37..fb28b71 100644
> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> @@ -1165,28 +1165,17 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port)
>   */
>  static int mvpp22_comphy_init(struct mvpp2_port *port)
>  {
> -	enum phy_mode mode;
> +	int submode;
>  	int ret;
>  
>  	if (!port->comphy)
>  		return 0;
>  
> -	switch (port->phy_interface) {
> -	case PHY_INTERFACE_MODE_SGMII:
> -	case PHY_INTERFACE_MODE_1000BASEX:
> -		mode = PHY_MODE_SGMII;
> -		break;
> -	case PHY_INTERFACE_MODE_2500BASEX:
> -		mode = PHY_MODE_2500SGMII;
> -		break;
> -	case PHY_INTERFACE_MODE_10GKR:
> -		mode = PHY_MODE_10GKR;
> -		break;
> -	default:
> -		return -EINVAL;
> -	}
> +	submode = port->phy_interface;
> +	if (submode == PHY_INTERFACE_MODE_1000BASEX)
> +		submode = PHY_INTERFACE_MODE_SGMII;

If the intention is to move the ethernet PHY mode into the generic PHY
layer, I'd suggest that the equivalence of 1000base-X and SGMII is
handled in the generic PHY driver rather than ethernet drivers.  Just
move this into this hunk of the comphy driver:

> @@ -517,10 +519,14 @@ static int mvebu_comphy_set_mode(struct phy *phy,
>  {
>  	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
>  
> -	if (mvebu_comphy_get_mux(lane->id, lane->port, mode) < 0)
> +	if (mode != PHY_MODE_ETHERNET)
> +		return -EINVAL;
> +
> +	if (mvebu_comphy_get_mux(lane->id, lane->port, mode, submode) < 0)
>  		return -EINVAL;
>  
>  	lane->mode = mode;
> +	lane->submode = submode;
>  	return 0;
>  }

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up