netdev - Re: [PATCH net-next v3 RFC 0/8] devlink: Add configuration parameters support for devlink

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAACQVJoKXkbvg5FBgSocK1958PYj9F1dDUtDwpX=B0L9eL5i6Q@mail.gmail.com>
Date:   Fri, 14 Dec 2018 22:14:29 +0530
From:   Vasundhara Volam <vasundhara-v.volam@...adcom.com>
To:     Jiri Pirko <jiri@...nulli.us>
Cc:     David Miller <davem@...emloft.net>,
        "michael.chan@...adcom.com" <michael.chan@...adcom.com>,
        Jiri Pirko <jiri@...lanox.com>, jakub.kicinski@...ronome.com,
        mkubecek@...e.cz, Netdev <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next v3 RFC 0/8] devlink: Add configuration parameters
 support for devlink_port

On Fri, Dec 14, 2018 at 6:45 PM Jiri Pirko <jiri@...nulli.us> wrote:
>
> Fri, Dec 14, 2018 at 11:09:46AM CET, vasundhara-v.volam@...adcom.com wrote:
> >This patchset adds support for configuration parameters setting through
> >devlink_port.  Each device registers supported configuration parameters
> >table.
> >
> >The user can retrieve data on these parameters by
> >"devlink port param show" command and can set new value to a
> >parameter by "devlink port param set" command.
> >All configuration modes supported by devlink_dev are supported
> >by devlink_port also.
> >
> >Command examples and output:
> >
> ># devlink port param show
> >pci/0000:3b:00.0/0:
> >  name wake-on-lan type generic
> >    values:
> >      cmode permanent value false
> >
> >pci/0000:3b:00.1/1:
> >  name wake-on-lan type generic
> >    values:
> >      cmode permanent value false
> >
> >pci/0000:af:00.0/0:
> >  name wake-on-lan type generic
> >    values:
> >      cmode permanent value true
> >
> ># devlink port param show pci/0000:3b:00.0/0 name wake-on-lan
> >pci/0000:3b:00.0/0:
> >  name wake-on-lan type generic
> >    values:
> >      cmode permanent value false
> >
> ># devlink port param set pci/0000:3b:00.0/0 name wake-on-lan cmode permanent value true
> >
> >v2->v3:
> >Make following changes as per suggestions from Jiri Pirko and
> >Michal Kubecek.
> >- Add a helper __devlink_params_register() with common code used by
> >  both devlink_params_register() and devlink_port_params_register().
> >- Define only WOL types used now and define them as bitfield, so that
> >  mutliple WOL types can be enabled upon power on.
> >- Modify "wake-on-lan" name to "wake_on_lan" to be symmetric with
> >  previous definitions.
> >- Rename DEVLINK_PARAM_WOL_XXX to DEVLINK_PARAM_WAKE_XXX to be
> >  symmetrical with ethtool WOL definitions.
> >- Modify bnxt_dl_wol_validate(), to throw error message when user gives
> >  value other than DEVLINK_PARAM_WAKE_MAGIC ot to disable WOL.
> >- Use netdev_err() instead of netdev_warn(), when devlink_port_register()
> >  and devlink_port_params_register() returns error. Also, don't log rc
> >  in this message.
>
> Could you please have this changelog per-patch? The best way is to put
> this into under individual patch descriptions. Thanks.
If everything looks good other than this, I will resubmit same version
with updated changelog per patch.
>
>
> >
> >v1->v2:
> >Make following changes as per suggestions from Jiri Pirko.
> >- Remove separate enum devlink_port_param_generic_id for port params.
> >  Instead club it with existing device params. Accordingly refactor
> >  remaining patchset.
> >- Move INIT_LIST_HEAD of port param_list to devlink_port_register()
> >- Add a helper devlink_param_verify() to be used for both
> >  devlink_params_register() and devlink_port_params_register().
> >- Add a helper __devlink_params_unregister() for common code in
> >  devlink_params_unregister() and devlink_port_params_unregister().
> >- Move DEVLINK_CMD_PORT_PARAM_XXX definitions to the end of the enum.
> >- Split the patches for devlink_port_param_driverinit_value_get() and
> >  devlink_port_param_driverinit_value_set() into separate patches.
> >- define DEVLINK_PARAM_GENERIC_ID_WOL type as u8 and define enum for
> >  different types of WOL. Accordingly modify bnxt_en patch to validate
> >  wol type.
> >
> >Vasundhara Volam (8):
> >  devlink: Add devlink_param for port register and unregister
> >  devlink: Add port param get command
> >  devlink: Add port param set command
> >  devlink: Add support for driverinit get value for devlink_port
> >  devlink: Add support for driverinit set value for devlink_port
> >  devlink: Add devlink notifications support for port params
> >  devlink: Add a generic wake_on_lan port parameter
> >  bnxt_en: Add bnxt_en initial port params table and register it
> >
> > drivers/net/ethernet/broadcom/bnxt/bnxt.h         |   1 +
> > drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c |  43 +-
> > drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h |   1 +
> > include/net/devlink.h                             |  57 +++
> > include/uapi/linux/devlink.h                      |   5 +
> > net/core/devlink.c                                | 464 ++++++++++++++++++----
> > 6 files changed, 489 insertions(+), 82 deletions(-)
> >
> >--
> >1.8.3.1
> >