netdev - Re: [PATCH] net: mlx5: allow default ip

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMDZJNV4qVCNdtNVtb0AFN1dEdZy_QmJV22j8YUn5k8y3=4=7Q@mail.gmail.com>
Date:   Thu, 17 Jan 2019 21:16:50 +0800
From:   Tonghao Zhang <xiangxia.m.yue@...il.com>
To:     Or Gerlitz <gerlitz.or@...il.com>
Cc:     Or Gerlitz <ogerlitz@...lanox.com>,
        Saeed Mahameed <saeedm@...lanox.com>,
        Leon Romanovsky <leonro@...lanox.com>,
        Linux Netdev List <netdev@...r.kernel.org>
Subject: Re: [PATCH] net: mlx5: allow default ip_proto to offload

On Thu, Jan 17, 2019 at 8:58 PM Or Gerlitz <gerlitz.or@...il.com> wrote:
>
> On Thu, Jan 17, 2019 at 11:28 AM <xiangxia.m.yue@...il.com> wrote:
> > From: Tonghao Zhang <xiangxia.m.yue@...il.com>
>
> with the current code, if a modification of the ip header is required
> and the ip protocol is not one of tcp, udp or icmp - we err
>
> This is done in purpose, and we don't want to allow offloading
> this header re-write for unknown ip protocol
>
> > Allow default ip_proto to offload, so icmp, tcp, and udp
> > will match the flow as show below, otherwise we must type the
> > ip_proto for icmp, tcp and udp respectively.
> >
> > $ tc filter add dev netdev01_rep parent ffff: protocol ip prio 1 \
> >         flower skip_sw dst_ip 3.3.3.3 \
> >         action pedit ex munge ip dst set 192.168.1.100 pipe \
> >         action csum ip pipe \
> >         action mirred egress redirect dev netdev02_rep
>
> this flow specify the ip protocol (1 which is icmp)
Without this patch, we should type ip_proto for flower, but not for tc
protocol， for example

[1]
tc filter add dev eth5_0 parent ffff: protocol ip prio 1 \
       flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \
       action xxx

if we run tc without flower ip_proto, we get the err:
[2]
tc filter add dev eth5_0 parent ffff: protocol ip prio 1 \
       flower skip_sw  dst_ip 3.3.3.3 \
       action xxx

err log:
"can't offload re-write of ip proto 0"

with this patch, run the command [2], we will not get err log, and the
filter work in hw.


> > Signed-off-by: Tonghao Zhang <xiangxia.m.yue@...il.com>
> > ---
> >  drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> > index 2ee377a..2a29428 100644
> > --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> > @@ -2219,7 +2219,7 @@ static bool modify_header_match_supported(struct mlx5_flow_spec *spec,
> >         }
> >
> >         ip_proto = MLX5_GET(fte_match_set_lyr_2_4, headers_v, ip_protocol);
> > -       if (modify_ip_header && ip_proto != IPPROTO_TCP &&
> > +       if (modify_ip_header && ip_proto != 0 && ip_proto != IPPROTO_TCP &&
> >             ip_proto != IPPROTO_UDP && ip_proto != IPPROTO_ICMP) {
> >                 NL_SET_ERR_MSG_MOD(extack,
> >                                    "can't offload re-write of non TCP/UDP");
>
> but under your patch we will not err for unknown ip protocol
>
> I have lost you
>
> BTW - I plan to change the polarity of the check here with the below
> patch - please see if it helps your use-case:
>
> commit 09b972083266fa8cfe2f24e1c264905d5cd021ed
> Author: Or Gerlitz <ogerlitz@...lanox.com>
> Date:   Wed Oct 31 18:42:21 2018 +0200
>
>     net/mlx5e: Allow TC offload of IP header re-write for more protocols
>
>     So far we allowed re-writing of IP header only for three protocols
>     (tcp, udp and icmpv4). This is too limiting, e.g for cases where
>     users want to apply offloading of NAT.
>
>     Take a complimentary approach and allow this for wider set of IP
>     protocols -- all of them except for three (icmpv6, sctp and udp-lite).
>     For these protos the current HW isn't capable to properly adjust the
>     l4 checksum while doing the modification <--- UPDATE - we probably
> can do icmpv6
>
>     Signed-off-by: Or Gerlitz <ogerlitz@...lanox.com>
>
>
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> index 608025ca5c04..affb523e0e35 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> @@ -2167,11 +2167,11 @@ static bool
> modify_header_match_supported(struct mlx5_flow_spec *spec,
>         }
>
>         ip_proto = MLX5_GET(fte_match_set_lyr_2_4, headers_v, ip_protocol);
> -       if (modify_ip_header && ip_proto != IPPROTO_TCP &&
> -           ip_proto != IPPROTO_UDP && ip_proto != IPPROTO_ICMP) {
> +       if (modify_ip_header && (ip_proto == IPPROTO_ICMPV6 ||
> +           ip_proto == IPPROTO_SCTP || ip_proto == IPPROTO_UDPLITE)) {
>                 NL_SET_ERR_MSG_MOD(extack,
> -                                  "can't offload re-write of non TCP/UDP");
> -               pr_info("can't offload re-write of ip proto %d\n", ip_proto);
> +                                  "can't offload this re-write of IP
> addresses");
> +               pr_info("can't offload re-write of IP addrs for ip
> proto %d\n", ip_proto);
>                 return false;
>         }