[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <19c1e5c4-2f86-a3ff-e971-a0098c605b3f@gmail.com>
Date: Sat, 9 Feb 2019 15:24:47 +0100
From: Heiner Kallweit <hkallweit1@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
David Miller <davem@...emloft.net>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH net-next] net: phy: Add support for asking the PHY its
abilities
From: Andrew Lunn <andrew@...n.ch>
Add support for runtime determination of what the PHY supports, by
adding a new function to the phy driver. The get_features call should
set the phydev->supported member with the features the PHY supports.
It is only called if phydrv->features is NULL.
This requires minor changes to pause. The PHY driver should not set
pause abilities, except for when it has odd cause capabilities, e.g.
pause cannot be disabled. With this change, phydev->supported already
contains the drivers abilities, including pause. So rather than
considering phydrv->features, look at the phydev->supported, and
enable pause if neither of the pause bits are already set.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
[hkallweit1@...il.com: fixed small checkpatch complaint in one comment]
Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
drivers/net/phy/phy_device.c | 31 +++++++++++++++----------------
include/linux/phy.h | 6 ++++++
2 files changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 92b7a71df..8573d17ec 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2236,7 +2236,14 @@ static int phy_probe(struct device *dev)
* a controller will attach, and may modify one
* or both of these values
*/
- linkmode_copy(phydev->supported, phydrv->features);
+ if (phydrv->features) {
+ linkmode_copy(phydev->supported, phydrv->features);
+ } else {
+ err = phydrv->get_features(phydev);
+ if (err)
+ goto out;
+ }
+
of_set_phy_supported(phydev);
linkmode_copy(phydev->advertising, phydev->supported);
@@ -2256,20 +2263,8 @@ static int phy_probe(struct device *dev)
* (e.g. hardware erratum) where the driver wants to set only one
* of these bits.
*/
- if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features) ||
- test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydrv->features)) {
- linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- phydev->supported);
- linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- phydev->supported);
- if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features))
- linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- phydev->supported);
- if (test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- phydrv->features))
- linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- phydev->supported);
- } else {
+ if (!test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported) &&
+ !test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported)) {
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
@@ -2315,7 +2310,11 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
{
int retval;
- if (WARN_ON(!new_driver->features)) {
+ /* Either the features are hard coded, or dynamically
+ * determine. It cannot be both or neither
+ */
+ if (WARN_ON((!new_driver->features && !new_driver->get_features) ||
+ (new_driver->features && new_driver->get_features))) {
pr_err("%s: Driver features are missing\n", new_driver->name);
return -EINVAL;
}
diff --git a/include/linux/phy.h b/include/linux/phy.h
index f41bf651f..d2ffae992 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -502,6 +502,12 @@ struct phy_driver {
*/
int (*probe)(struct phy_device *phydev);
+ /*
+ * Probe the hardware to determine what abilities it has.
+ * Should only set phydev->supported.
+ */
+ int (*get_features)(struct phy_device *phydev);
+
/* PHY Power Management */
int (*suspend)(struct phy_device *phydev);
int (*resume)(struct phy_device *phydev);
--
2.20.1
Powered by blists - more mailing lists