lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 13 Feb 2019 11:28:45 +0000
From:   Ido Schimmel <idosch@...lanox.com>
To:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC:     "davem@...emloft.net" <davem@...emloft.net>,
        Jiri Pirko <jiri@...lanox.com>,
        "andrew@...n.ch" <andrew@...n.ch>, mlxsw <mlxsw@...lanox.com>,
        Vadim Pasternak <vadimp@...lanox.com>,
        Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net-next 02/12] mlxsw: reg: Add Management Temperature Bulk
 Register

From: Vadim Pasternak <vadimp@...lanox.com>

Add MTBR (Management Temperature Bulk Register), which is used for port
temperature reading in a bulk mode.

Signed-off-by: Vadim Pasternak <vadimp@...lanox.com>
Reviewed-by: Jiri Pirko <jiri@...lanox.com>
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 75 +++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 1190a6a501a5..13856f40b8a7 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -8001,6 +8001,80 @@ static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp,
 		mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name);
 }
 
+/* MTBR - Management Temperature Bulk Register
+ * -------------------------------------------
+ * This register is used for bulk temperature reading.
+ */
+#define MLXSW_REG_MTBR_ID 0x900F
+#define MLXSW_REG_MTBR_BASE_LEN 0x10 /* base length, without records */
+#define MLXSW_REG_MTBR_REC_LEN 0x04 /* record length */
+#define MLXSW_REG_MTBR_REC_MAX_COUNT 47 /* firmware limitation */
+#define MLXSW_REG_MTBR_LEN (MLXSW_REG_MTBR_BASE_LEN +	\
+			    MLXSW_REG_MTBR_REC_LEN *	\
+			    MLXSW_REG_MTBR_REC_MAX_COUNT)
+
+MLXSW_REG_DEFINE(mtbr, MLXSW_REG_MTBR_ID, MLXSW_REG_MTBR_LEN);
+
+/* reg_mtbr_base_sensor_index
+ * Base sensors index to access (0 - ASIC sensor, 1-63 - ambient sensors,
+ * 64-127 are mapped to the SFP+/QSFP modules sequentially).
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mtbr, base_sensor_index, 0x00, 0, 7);
+
+/* reg_mtbr_num_rec
+ * Request: Number of records to read
+ * Response: Number of records read
+ * See above description for more details.
+ * Range 1..255
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtbr, num_rec, 0x04, 0, 8);
+
+/* reg_mtbr_rec_max_temp
+ * The highest measured temperature from the sensor.
+ * When the bit mte is cleared, the field max_temperature is reserved.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtbr, rec_max_temp, MLXSW_REG_MTBR_BASE_LEN, 16,
+		     16, MLXSW_REG_MTBR_REC_LEN, 0x00, false);
+
+/* reg_mtbr_rec_temp
+ * Temperature reading from the sensor. Reading is in 0..125 Celsius
+ * degrees units.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtbr, rec_temp, MLXSW_REG_MTBR_BASE_LEN, 0, 16,
+		     MLXSW_REG_MTBR_REC_LEN, 0x00, false);
+
+static inline void mlxsw_reg_mtbr_pack(char *payload, u8 base_sensor_index,
+				       u8 num_rec)
+{
+	MLXSW_REG_ZERO(mtbr, payload);
+	mlxsw_reg_mtbr_base_sensor_index_set(payload, base_sensor_index);
+	mlxsw_reg_mtbr_num_rec_set(payload, num_rec);
+}
+
+/* Error codes from temperatute reading */
+enum mlxsw_reg_mtbr_temp_status {
+	MLXSW_REG_MTBR_NO_CONN		= 0x8000,
+	MLXSW_REG_MTBR_NO_TEMP_SENS	= 0x8001,
+	MLXSW_REG_MTBR_INDEX_NA		= 0x8002,
+	MLXSW_REG_MTBR_BAD_SENS_INFO	= 0x8003,
+};
+
+/* Base index for reading modules temperature */
+#define MLXSW_REG_MTBR_BASE_MODULE_INDEX 64
+
+static inline void mlxsw_reg_mtbr_temp_unpack(char *payload, int rec_ind,
+					      u16 *p_temp, u16 *p_max_temp)
+{
+	if (p_temp)
+		*p_temp = mlxsw_reg_mtbr_rec_temp_get(payload, rec_ind);
+	if (p_max_temp)
+		*p_max_temp = mlxsw_reg_mtbr_rec_max_temp_get(payload, rec_ind);
+}
+
 /* MCIA - Management Cable Info Access
  * -----------------------------------
  * MCIA register is used to access the SFP+ and QSFP connector's EPROM.
@@ -9779,6 +9853,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
 	MLXSW_REG(mfsl),
 	MLXSW_REG(mtcap),
 	MLXSW_REG(mtmp),
+	MLXSW_REG(mtbr),
 	MLXSW_REG(mcia),
 	MLXSW_REG(mpat),
 	MLXSW_REG(mpar),
-- 
2.20.1

Powered by blists - more mailing lists