netdev - [PATCH net-next 05/12] mlxsw: core: Set different thermal polling time based on bus frequency capability

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190213112814.32334-6-idosch@mellanox.com>
Date:   Wed, 13 Feb 2019 11:28:48 +0000
From:   Ido Schimmel <idosch@...lanox.com>
To:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC:     "davem@...emloft.net" <davem@...emloft.net>,
        Jiri Pirko <jiri@...lanox.com>,
        "andrew@...n.ch" <andrew@...n.ch>, mlxsw <mlxsw@...lanox.com>,
        Vadim Pasternak <vadimp@...lanox.com>,
        Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net-next 05/12] mlxsw: core: Set different thermal polling
 time based on bus frequency capability

From: Vadim Pasternak <vadimp@...lanox.com>

Add low frequency bus capability in order to allow core functionality
separation based on bus type. Driver could run over PCIe, which is
considered as high frequency bus or I2C, which is considered as low
frequency bus. In the last case time setting, for example, for thermal
polling interval, should be increased.

Use different thermal monitoring based on bus type. For I2C bus time is
set to 20 seconds, while for PCIe 1 second polling interval is used.

Signed-off-by: Vadim Pasternak <vadimp@...lanox.com>
Reviewed-by: Jiri Pirko <jiri@...lanox.com>
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/core.h         |  1 +
 drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 10 ++++++++--
 drivers/net/ethernet/mellanox/mlxsw/i2c.c          |  1 +
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.h b/drivers/net/ethernet/mellanox/mlxsw/core.h
index c8e16a305969..cd0c6aa0dff9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.h
@@ -344,6 +344,7 @@ struct mlxsw_bus_info {
 	struct mlxsw_fw_rev fw_rev;
 	u8 vsd[MLXSW_CMD_BOARDINFO_VSD_LEN];
 	u8 psid[MLXSW_CMD_BOARDINFO_PSID_LEN];
+	u8 low_frequency;
 };
 
 struct mlxsw_hwmon;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index 61f897b40f82..b1f9b459766c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -13,6 +13,7 @@
 #include "core.h"
 
 #define MLXSW_THERMAL_POLL_INT	1000	/* ms */
+#define MLXSW_THERMAL_SLOW_POLL_INT	20000	/* ms */
 #define MLXSW_THERMAL_MAX_TEMP	110000	/* 110C */
 #define MLXSW_THERMAL_MAX_STATE	10
 #define MLXSW_THERMAL_MAX_DUTY	255
@@ -76,6 +77,7 @@ struct mlxsw_thermal {
 	struct mlxsw_core *core;
 	const struct mlxsw_bus_info *bus_info;
 	struct thermal_zone_device *tzdev;
+	int polling_delay;
 	struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX];
 	u8 cooling_levels[MLXSW_THERMAL_MAX_STATE + 1];
 	struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
@@ -172,7 +174,7 @@ static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
 	mutex_lock(&tzdev->lock);
 
 	if (mode == THERMAL_DEVICE_ENABLED)
-		tzdev->polling_delay = MLXSW_THERMAL_POLL_INT;
+		tzdev->polling_delay = thermal->polling_delay;
 	else
 		tzdev->polling_delay = 0;
 
@@ -423,13 +425,17 @@ int mlxsw_thermal_init(struct mlxsw_core *core,
 		thermal->cooling_levels[i] = max(MLXSW_THERMAL_SPEED_MIN_LEVEL,
 						 i);
 
+	thermal->polling_delay = bus_info->low_frequency ?
+				 MLXSW_THERMAL_SLOW_POLL_INT :
+				 MLXSW_THERMAL_POLL_INT;
+
 	thermal->tzdev = thermal_zone_device_register("mlxsw",
 						      MLXSW_THERMAL_NUM_TRIPS,
 						      MLXSW_THERMAL_TRIP_MASK,
 						      thermal,
 						      &mlxsw_thermal_ops,
 						      NULL, 0,
-						      MLXSW_THERMAL_POLL_INT);
+						      thermal->polling_delay);
 	if (IS_ERR(thermal->tzdev)) {
 		err = PTR_ERR(thermal->tzdev);
 		dev_err(dev, "Failed to register thermal zone\n");
diff --git a/drivers/net/ethernet/mellanox/mlxsw/i2c.c b/drivers/net/ethernet/mellanox/mlxsw/i2c.c
index 798bd5aca384..a87ca6b6580d 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/i2c.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/i2c.c
@@ -503,6 +503,7 @@ static int mlxsw_i2c_probe(struct i2c_client *client,
 	mlxsw_i2c->bus_info.device_kind = id->name;
 	mlxsw_i2c->bus_info.device_name = client->name;
 	mlxsw_i2c->bus_info.dev = &client->dev;
+	mlxsw_i2c->bus_info.low_frequency = true;
 	mlxsw_i2c->dev = &client->dev;
 
 	err = mlxsw_core_bus_device_register(&mlxsw_i2c->bus_info,
-- 
2.20.1