lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190301105217.15764-10-antoine.tenart@bootlin.com> Date: Fri, 1 Mar 2019 11:52:11 +0100 From: Antoine Tenart <antoine.tenart@...tlin.com> To: davem@...emloft.net Cc: Antoine Tenart <antoine.tenart@...tlin.com>, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, thomas.petazzoni@...tlin.com, maxime.chevallier@...tlin.com, gregory.clement@...tlin.com, miquel.raynal@...tlin.com, nadavh@...vell.com, stefanc@...vell.com, mw@...ihalf.com, linux@...linux.org.uk Subject: [PATCH net-next v2 09/15] net: mvpp2: always disable both MACs when disabling a port This patch modifies the port_disable() helper to always disable both the GMAC and the XLG MAC when called. At boot time we do not know of a port was enabled in the firmware/bootloader, and if so what mode was used (hence which of the two MACs was used). This also help in implementing a logic where all blocks are disabled when not used, and only enabled regarding the current mode used on a given port. Signed-off-by: Antoine Tenart <antoine.tenart@...tlin.com> --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 11284918d907..b27966355df9 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -1214,11 +1214,11 @@ static void mvpp2_port_disable(struct mvpp2_port *port) /* Disable & reset should be done separately */ val &= ~MVPP22_XLG_CTRL0_MAC_RESET_DIS; writel(val, port->base + MVPP22_XLG_CTRL0_REG); - } else { - val = readl(port->base + MVPP2_GMAC_CTRL_0_REG); - val &= ~(MVPP2_GMAC_PORT_EN_MASK); - writel(val, port->base + MVPP2_GMAC_CTRL_0_REG); } + + val = readl(port->base + MVPP2_GMAC_CTRL_0_REG); + val &= ~(MVPP2_GMAC_PORT_EN_MASK); + writel(val, port->base + MVPP2_GMAC_CTRL_0_REG); } /* Set IEEE 802.3x Flow Control Xon Packet Transmission Mode */ -- 2.20.1
Powered by blists - more mailing lists