netdev - [PATCH net-next v2 10/15] net: mvpp2: only update the XLG configuration when needed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190301105217.15764-11-antoine.tenart@bootlin.com>
Date:   Fri,  1 Mar 2019 11:52:12 +0100
From:   Antoine Tenart <antoine.tenart@...tlin.com>
To:     davem@...emloft.net
Cc:     Antoine Tenart <antoine.tenart@...tlin.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        thomas.petazzoni@...tlin.com, maxime.chevallier@...tlin.com,
        gregory.clement@...tlin.com, miquel.raynal@...tlin.com,
        nadavh@...vell.com, stefanc@...vell.com, mw@...ihalf.com,
        linux@...linux.org.uk
Subject: [PATCH net-next v2 10/15] net: mvpp2: only update the XLG configuration when needed

This patch improves the XLG configuration function, to only update the
XLG configuration register when a change is needed. This helps not
writing over and over the same XLG configuration each time phylink
request the MAC to be configured. This mimics the GMAC configuration
function.

Signed-off-by: Antoine Tenart <antoine.tenart@...tlin.com>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index b27966355df9..59ee9e7545b0 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4506,10 +4506,11 @@ static void mvpp2_mac_an_restart(struct net_device *dev)
 static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode,
 			     const struct phylink_link_state *state)
 {
-	u32 ctrl0, ctrl4;
+	u32 old_ctrl0, ctrl0;
+	u32 old_ctrl4, ctrl4;
 
-	ctrl0 = readl(port->base + MVPP22_XLG_CTRL0_REG);
-	ctrl4 = readl(port->base + MVPP22_XLG_CTRL4_REG);
+	old_ctrl0 = ctrl0 = readl(port->base + MVPP22_XLG_CTRL0_REG);
+	old_ctrl4 = ctrl4 = readl(port->base + MVPP22_XLG_CTRL4_REG);
 
 	if (state->pause & MLO_PAUSE_TX)
 		ctrl0 |= MVPP22_XLG_CTRL0_TX_FLOW_CTRL_EN;
@@ -4525,8 +4526,10 @@ static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode,
 	ctrl4 |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC |
 		 MVPP22_XLG_CTRL4_EN_IDLE_CHECK;
 
-	writel(ctrl0, port->base + MVPP22_XLG_CTRL0_REG);
-	writel(ctrl4, port->base + MVPP22_XLG_CTRL4_REG);
+	if (old_ctrl0 != ctrl0)
+		writel(ctrl0, port->base + MVPP22_XLG_CTRL0_REG);
+	if (old_ctrl4 != ctrl4)
+		writel(ctrl4, port->base + MVPP22_XLG_CTRL4_REG);
 }
 
 static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
-- 
2.20.1