| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <61038e49-28b5-53e2-8b16-e95623b6eb3c@microchip.com>
Date: Thu, 21 Mar 2019 14:12:45 +0000
From: <Nicolas.Ferre@...rochip.com>
To: <pthombar@...ence.com>, <andrew@...n.ch>
CC: <davem@...emloft.net>, <netdev@...r.kernel.org>,
<f.fainelli@...il.com>, <hkallweit1@...il.com>,
<linux-kernel@...r.kernel.org>, <rafalc@...ence.com>,
<piotrs@...ence.com>, <jank@...ence.com>
Subject: Re: [PATCH v2 2/3] net: ethernet: cadence: add c45 PHY support in
MDIO read/write functions.
$subject line should be:
"net: macb: Add c45 PHY support in MDIO read/write functions"
On 18/03/2019 at 18:42, Parshuram Thombare wrote:
> Sorry for sending this patch again, but I didn't sent previous
> email --in-reply-to last comment on v1 of this patch. So
> rectifying this mistake.
>
> This version 2 of patch to modify MDIO read/write functions to support
> communication with C45 PHY in Cadence ethernet controller driver.
>
> Changes:
> 1. Added timeout
> 2. Removed unused operation macro MACB_MAN_C45_POST_READ_INCR
>
> I thought of starting with relatively smaller, independant and simpler changes.
> This patch is independant of patch series and looks relatively straight forward
> with aim of supporting C45 PHY for support of high speed PHY's.
Most of this must go below the "---" line hereunder...
>
> Signed-off-by: Parshuram Thombare <pthombar@...ence.com>
> ---
There ^.
And the commit message before should look like:
"
Modify MDIO read/write functions to support communication with C45 PHY
in Cadence ethernet controller driver.
"
> drivers/net/ethernet/cadence/macb.h | 14 +++++--
> drivers/net/ethernet/cadence/macb_main.c | 61 ++++++++++++++++++++++++-----
> 2 files changed, 60 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
> index acc66a7..d25fa03 100644
> --- a/drivers/net/ethernet/cadence/macb.h
> +++ b/drivers/net/ethernet/cadence/macb.h
> @@ -629,10 +629,16 @@
> #define GEM_CLK_DIV96 5
>
> /* Constants for MAN register */
> -#define MACB_MAN_SOF 1
> -#define MACB_MAN_WRITE 1
> -#define MACB_MAN_READ 2
> -#define MACB_MAN_CODE 2
> +#define MACB_MAN_C22_SOF 1
> +#define MACB_MAN_C22_WRITE 1
> +#define MACB_MAN_C22_READ 2
> +#define MACB_MAN_C22_CODE 2
> +
> +#define MACB_MAN_C45_SOF 0
> +#define MACB_MAN_C45_ADDR 0
> +#define MACB_MAN_C45_WRITE 1
> +#define MACB_MAN_C45_READ 3
> +#define MACB_MAN_C45_CODE 2
You changed tabs to spaces here: please conform to preceding driver's
style and other lines of this .h file.
>
> /* Capability mask bits */
> #define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x00000001
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index ad099fd..17072fd 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -345,11 +345,30 @@ static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
> if (status < 0)
> goto mdio_read_exit;
>
> - macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
> - | MACB_BF(RW, MACB_MAN_READ)
> - | MACB_BF(PHYA, mii_id)
> - | MACB_BF(REGA, regnum)
> - | MACB_BF(CODE, MACB_MAN_CODE)));
> + if (regnum & MII_ADDR_C45) {
> + macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C45_SOF)
> + | MACB_BF(RW, MACB_MAN_C45_ADDR)
> + | MACB_BF(PHYA, mii_id)
> + | MACB_BF(REGA, (regnum >> 16) & 0x1F)
> + | MACB_BF(DATA, regnum & 0xFFFF)
> + | MACB_BF(CODE, MACB_MAN_C45_CODE)));
> +
> + status = macb_mdio_wait_for_idle(bp);
> + if (status < 0)
> + goto mdio_read_exit;
> +
> + macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C45_SOF)
> + | MACB_BF(RW, MACB_MAN_C45_READ)
> + | MACB_BF(PHYA, mii_id)
> + | MACB_BF(REGA, (regnum >> 16) & 0x1F)
> + | MACB_BF(CODE, MACB_MAN_C45_CODE)));
> + } else {
> + macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C22_SOF)
> + | MACB_BF(RW, MACB_MAN_C22_READ)
> + | MACB_BF(PHYA, mii_id)
> + | MACB_BF(REGA, regnum)
> + | MACB_BF(CODE, MACB_MAN_C22_CODE)));
> + }
>
> status = macb_mdio_wait_for_idle(bp);
> if (status < 0)
> @@ -378,12 +397,32 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
> if (status < 0)
> goto mdio_write_exit;
>
> - macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
> - | MACB_BF(RW, MACB_MAN_WRITE)
> - | MACB_BF(PHYA, mii_id)
> - | MACB_BF(REGA, regnum)
> - | MACB_BF(CODE, MACB_MAN_CODE)
> - | MACB_BF(DATA, value)));
> + if (regnum & MII_ADDR_C45) {
> + macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C45_SOF)
> + | MACB_BF(RW, MACB_MAN_C45_ADDR)
> + | MACB_BF(PHYA, mii_id)
> + | MACB_BF(REGA, (regnum >> 16) & 0x1F)
> + | MACB_BF(DATA, regnum & 0xFFFF)
> + | MACB_BF(CODE, MACB_MAN_C45_CODE)));
> +
> + status = macb_mdio_wait_for_idle(bp);
> + if (status < 0)
> + goto mdio_write_exit;
> +
> + macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C45_SOF)
> + | MACB_BF(RW, MACB_MAN_C45_WRITE)
> + | MACB_BF(PHYA, mii_id)
> + | MACB_BF(REGA, (regnum >> 16) & 0x1F)
> + | MACB_BF(CODE, MACB_MAN_C45_CODE)
> + | MACB_BF(DATA, value)));
> + } else {
> + macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_C22_SOF)
> + | MACB_BF(RW, MACB_MAN_C22_WRITE)
> + | MACB_BF(PHYA, mii_id)
> + | MACB_BF(REGA, regnum)
> + | MACB_BF(CODE, MACB_MAN_C22_CODE)
> + | MACB_BF(DATA, value)));
> + }
>
> status = macb_mdio_wait_for_idle(bp);
> if (status < 0)
Otherwise it looks correct to me on the macb point-of-view.
Please correct the little things noted before, re-send independently as
a v3 and we also make sure that things are good on the phy side.
Best regards,
--
Nicolas Ferre
Powered by blists - more mailing lists