netdev - [PATCH 4/4] ethtool: add PHY Fast Link Down tunable to man page

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2ca651c7-89b3-65fd-0941-b732692c8d41@gmail.com>
Date:   Thu, 28 Mar 2019 20:28:56 +0100
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     John Linville <linville@...driver.com>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH 4/4] ethtool: add PHY Fast Link Down tunable to man page

Add description of new PHY tunable Fast Link Down to ethtool man page.

Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
 ethtool.8.in | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/ethtool.8.in b/ethtool.8.in
index b878521..c2a97f2 100644
--- a/ethtool.8.in
+++ b/ethtool.8.in
@@ -355,10 +355,16 @@ ethtool \- query or control network driver and hardware settings
 .A1 on off
 .BN count
 .RB ]
+.RB [
+.B fast\-link\-down
+.A1 on off
+.BN msecs
+.RB ]
 .HP
 .B ethtool \-\-get\-phy\-tunable
 .I devname
 .RB [ downshift ]
+.RB [ fast-link-down ]
 .HP
 .B ethtool \-\-reset
 .I devname
@@ -1069,12 +1075,22 @@ Sets the PHY tunable parameters.
 .RS 4
 .TP
 .A2 downshift on off
-Specifies whether downshift should be enabled
+Specifies whether downshift should be enabled.
 .TS
 nokeep;
 lB	l.
 .BI count \ N
-Sets the PHY downshift re-tries count.
+	Sets the PHY downshift re-tries count.
+.TE
+.TP
+.A2 fast-link-down on off
+Specifies whether Fast Link Down should be enabled and time until link down (if supported).
+.TS
+nokeep;
+lB	l.
+.BI msecs \ N
+	Sets the period after which the link is reported as down. Note that the PHY may choose
+	the closest supported value. Only on reading back you get the actual value.
 .TE
 .PD
 .RE
@@ -1090,6 +1106,14 @@ Link speed downshift after N failed 1000BASE-T auto-negotiation attempts.
 Downshift is useful where cable does not have the 4 pairs instance.
 
 Gets the PHY downshift count/status.
+.TP
+.B fast\-link\-down
+Depending on the mode it may take 0.5s - 1s until a broken link is reported as down.
+In certain use cases a link-down event needs to be reported as soon as possible.
+Some PHYs support a Fast Link Down feature, and partially even allow to configure
+the period until until a broken link is reported as being down.
+
+Gets the PHY Fast Link Down status / period.
 .RE
 .TP
 .B \-\-reset
-- 
2.21.0