netdev - [PATCH 1/4] ethtool: sync ethtool-copy.h with linux-next from 03/28/2019

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ca745012-5920-8090-d4b5-709683e0e877@gmail.com>
Date:   Thu, 28 Mar 2019 20:26:25 +0100
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     John Linville <linville@...driver.com>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH 1/4] ethtool: sync ethtool-copy.h with linux-next from
 03/28/2019

Sync ethtool-copy.h with linux-next from 03/28/2019. This provides
access to the new PHY tunable for Fast Link Down support.

Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
 ethtool-copy.h | 44 ++++++++++++++++++++++----------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/ethtool-copy.h b/ethtool-copy.h
index 1204076..92ab10d 100644
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -89,10 +89,6 @@
  * %ETHTOOL_GSET to get the current values before making specific
  * changes and then applying them with %ETHTOOL_SSET.
  *
- * Drivers that implement set_settings() should validate all fields
- * other than @cmd that are not described as read-only or deprecated,
- * and must ignore all fields described as read-only.
- *
  * Deprecated fields should be ignored by both users and drivers.
  */
 struct ethtool_cmd {
@@ -254,9 +250,17 @@ struct ethtool_tunable {
 #define DOWNSHIFT_DEV_DEFAULT_COUNT	0xff
 #define DOWNSHIFT_DEV_DISABLE		0
 
+/* Time in msecs after which link is reported as down
+ * 0 = lowest time supported by the PHY
+ * 0xff = off, link down detection according to standard
+ */
+#define ETHTOOL_PHY_FAST_LINK_DOWN_ON	0
+#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF	0xff
+
 enum phy_tunable_id {
 	ETHTOOL_PHY_ID_UNSPEC,
 	ETHTOOL_PHY_DOWNSHIFT,
+	ETHTOOL_PHY_FAST_LINK_DOWN,
 	/*
 	 * Add your fresh new phy tunable attribute above and remember to update
 	 * phy_tunable_strings[] in net/core/ethtool.c
@@ -884,7 +888,7 @@ struct ethtool_rx_flow_spec {
 	__u32		location;
 };
 
-/* How rings are layed out when accessing virtual functions or
+/* How rings are laid out when accessing virtual functions or
  * offloaded queues is device specific. To allow users to do flow
  * steering and specify these queues the ring cookie is partitioned
  * into a 32bit queue index with an 8 bit virtual function id.
@@ -893,7 +897,7 @@ struct ethtool_rx_flow_spec {
  * devices start supporting PCIe w/ARI. However at the moment I
  * do not know of any devices that support this so I do not reserve
  * space for this at this time. If a future patch consumes the next
- * byte it should be aware of this possiblity.
+ * byte it should be aware of this possibility.
  */
 #define ETHTOOL_RX_FLOW_SPEC_RING	0x00000000FFFFFFFFLL
 #define ETHTOOL_RX_FLOW_SPEC_RING_VF	0x000000FF00000000LL
@@ -1434,6 +1438,13 @@ enum ethtool_link_mode_bit_indices {
 	ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT	= 29,
 	ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT	= 30,
 	ETHTOOL_LINK_MODE_25000baseCR_Full_BIT	= 31,
+
+	/* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
+	 * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
+	 * macro for bits > 31. The only way to use indices > 31 is to
+	 * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
+	 */
+
 	ETHTOOL_LINK_MODE_25000baseKR_Full_BIT	= 32,
 	ETHTOOL_LINK_MODE_25000baseSR_Full_BIT	= 33,
 	ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT	= 34,
@@ -1471,14 +1482,8 @@ enum ethtool_link_mode_bit_indices {
 	ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT	 = 65,
 	ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT	 = 66,
 
-	/* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
-	 * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
-	 * macro for bits > 31. The only way to use indices > 31 is to
-	 * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
-	 */
-
-	__ETHTOOL_LINK_MODE_LAST
-	  = ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT,
+	/* must be last entry */
+	__ETHTOOL_LINK_MODE_MASK_NBITS
 };
 
 #define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name)	\
@@ -1814,14 +1819,9 @@ enum ethtool_reset_flags {
  * rejected.
  *
  * Deprecated %ethtool_cmd fields transceiver, maxtxpkt and maxrxpkt
- * are not available in %ethtool_link_settings. Until all drivers are
- * converted to ignore them or to the new %ethtool_link_settings API,
- * for both queries and changes, users should always try
- * %ETHTOOL_GLINKSETTINGS first, and if it fails with -ENOTSUPP stick
- * only to %ETHTOOL_GSET and %ETHTOOL_SSET consistently. If it
- * succeeds, then users should stick to %ETHTOOL_GLINKSETTINGS and
- * %ETHTOOL_SLINKSETTINGS (which would support drivers implementing
- * either %ethtool_cmd or %ethtool_link_settings).
+ * are not available in %ethtool_link_settings. These fields will be
+ * always set to zero in %ETHTOOL_GSET reply and %ETHTOOL_SSET will
+ * fail if any of them is set to non-zero value.
  *
  * Users should assume that all fields not marked read-only are
  * writable and subject to validation by the driver.  They should use
-- 
2.21.0