netdev - [PATCH v2 2/3] broadcom: tg3: fix use of SPEED

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1554734927-15522-3-git-send-email-mzhivich@akamai.com>
Date:   Mon, 8 Apr 2019 10:48:46 -0400
From:   Michael Zhivich <mzhivich@...mai.com>
To:     <davem@...emloft.net>
CC:     <siva.kallam@...adcom.com>, <prashant@...adcom.com>,
        <mchan@...adcom.com>, <shshaikh@...vell.com>,
        <manishc@...vell.com>, <netdev@...r.kernel.org>,
        Michael Zhivich <mzhivich@...mai.com>
Subject: [PATCH v2 2/3] broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant

tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant,
which is defined as -1, resulting in value truncation and
thus incorrect test results against SPEED_UNKNOWN.

For example, the following test will print "False":

	u16 speed = SPEED_UNKNOWN;

	if (speed == SPEED_UNKNOWN)
	    printf("True");
	else
	    printf("False");

Change storage of speed to use u32 to avoid this issue.

Signed-off-by: Michael Zhivich <mzhivich@...mai.com>
---
 drivers/net/ethernet/broadcom/tg3.c | 8 ++++----
 drivers/net/ethernet/broadcom/tg3.h | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 328373e..060a6f3 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -4283,7 +4283,7 @@ static void tg3_power_down(struct tg3 *tp)
 	pci_set_power_state(tp->pdev, PCI_D3hot);
 }
 
-static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
+static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u32 *speed, u8 *duplex)
 {
 	switch (val & MII_TG3_AUX_STAT_SPDMASK) {
 	case MII_TG3_AUX_STAT_10HALF:
@@ -4787,7 +4787,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, bool force_reset)
 	bool current_link_up;
 	u32 bmsr, val;
 	u32 lcl_adv, rmt_adv;
-	u16 current_speed;
+	u32 current_speed;
 	u8 current_duplex;
 	int i, err;
 
@@ -5719,7 +5719,7 @@ static bool tg3_setup_fiber_by_hand(struct tg3 *tp, u32 mac_status)
 static int tg3_setup_fiber_phy(struct tg3 *tp, bool force_reset)
 {
 	u32 orig_pause_cfg;
-	u16 orig_active_speed;
+	u32 orig_active_speed;
 	u8 orig_active_duplex;
 	u32 mac_status;
 	bool current_link_up;
@@ -5823,7 +5823,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, bool force_reset)
 {
 	int err = 0;
 	u32 bmsr, bmcr;
-	u16 current_speed = SPEED_UNKNOWN;
+	u32 current_speed = SPEED_UNKNOWN;
 	u8 current_duplex = DUPLEX_UNKNOWN;
 	bool current_link_up = false;
 	u32 local_adv, remote_adv, sgsr;
diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index a772a33..6953d05 100644
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -2873,7 +2873,7 @@ struct tg3_tx_ring_info {
 struct tg3_link_config {
 	/* Describes what we're trying to get. */
 	u32				advertising;
-	u16				speed;
+	u32				speed;
 	u8				duplex;
 	u8				autoneg;
 	u8				flowctrl;
@@ -2882,7 +2882,7 @@ struct tg3_link_config {
 	u8				active_flowctrl;
 
 	u8				active_duplex;
-	u16				active_speed;
+	u32				active_speed;
 	u32				rmt_adv;
 };
 
-- 
2.7.4