| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1554888451-17518-1-git-send-email-rjliao@codeaurora.org>
Date: Wed, 10 Apr 2019 17:27:31 +0800
From: Rocky Liao <rjliao@...eaurora.org>
To: robh+dt@...nel.org, mark.rutland@....com, marcel@...tmann.org,
johan.hedberg@...il.com, thierry.escande@...aro.org
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
linux-arm-msm@...r.kernel.org, bgodavar@...eaurora.org,
Rocky Liao <rjliao@...eaurora.org>
Subject: [PATCH v3 1/2] Bluetooth: hci_qca: Load customized NVM based on the device property
QCA BTSOC NVM is a customized firmware file and different vendors may
want to have different BTSOC configuration (e.g. Configure SCO over PCM
or I2S, Setting Tx power, etc.) via this file. This patch will allow
vendors to download different NVM firmware file by reading a device
property "firmware-name".
Signed-off-by: Rocky Liao <rjliao@...eaurora.org>
---
Changes in v3:
* added firmware-name instead of nvm-postfix to specify full firmware name
---
drivers/bluetooth/btqca.c | 14 ++++++++++----
drivers/bluetooth/btqca.h | 6 ++++--
drivers/bluetooth/hci_qca.c | 19 ++++++++++++++++++-
3 files changed, 32 insertions(+), 7 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 6122685..645a893 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -332,7 +332,8 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
- enum qca_btsoc_type soc_type, u32 soc_ver)
+ enum qca_btsoc_type soc_type, u32 soc_ver,
+ const char *firmware_name)
{
struct rome_config config;
int err;
@@ -368,9 +369,14 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
if (soc_type == QCA_WCN3990)
snprintf(config.fwname, sizeof(config.fwname),
"qca/crnv%02x.bin", rom_ver);
- else
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/nvm_%08x.bin", soc_ver);
+ else {
+ if (firmware_name)
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/%s", firmware_name);
+ else
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/nvm_%08x.bin", soc_ver);
+ }
err = qca_download_firmware(hdev, &config);
if (err < 0) {
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 6fdc25d..41dc806 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -139,7 +139,8 @@ enum qca_btsoc_type {
int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
- enum qca_btsoc_type soc_type, u32 soc_ver);
+ enum qca_btsoc_type soc_type, u32 soc_ver,
+ const char *firmware_name);
int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
#else
@@ -150,7 +151,8 @@ static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
}
static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
- enum qca_btsoc_type soc_type, u32 soc_ver)
+ enum qca_btsoc_type soc_type, u32 soc_ver,
+ const char *firmware_name)
{
return -EOPNOTSUPP;
}
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 4ea995d..9b8d4d7 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -168,6 +168,7 @@ struct qca_serdev {
struct qca_power *bt_power;
u32 init_speed;
u32 oper_speed;
+ const char *firmware_name;
};
static int qca_power_setup(struct hci_uart *hu, bool on);
@@ -189,6 +190,17 @@ static enum qca_btsoc_type qca_soc_type(struct hci_uart *hu)
return soc_type;
}
+static const char *qca_get_firmware_name(struct hci_uart *hu)
+{
+ if (hu->serdev) {
+ struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
+
+ return qsd->firmware_name;
+ } else {
+ return NULL;
+ }
+}
+
static void __serial_clock_on(struct tty_struct *tty)
{
/* TODO: Some chipset requires to enable UART clock on client
@@ -1191,6 +1203,7 @@ static int qca_setup(struct hci_uart *hu)
struct qca_data *qca = hu->priv;
unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
enum qca_btsoc_type soc_type = qca_soc_type(hu);
+ const char *firmware_name = qca_get_firmware_name(hu);
int ret;
int soc_ver = 0;
@@ -1241,7 +1254,8 @@ static int qca_setup(struct hci_uart *hu)
bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
/* Setup patch / NVM configurations */
- ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver);
+ ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
+ firmware_name);
if (!ret) {
set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
qca_debugfs_init(hdev);
@@ -1462,6 +1476,9 @@ static int qca_serdev_probe(struct serdev_device *serdev)
return PTR_ERR(qcadev->bt_en);
}
+ device_property_read_string(&serdev->dev, "firmware-name",
+ &qcadev->firmware_name);
+
qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
if (IS_ERR(qcadev->susclk)) {
dev_err(&serdev->dev, "failed to acquire clk\n");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Powered by blists - more mailing lists