lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <A85D7982-E000-4A5F-9927-CA36E0BA60F2@holtmann.org>
Date:   Tue, 23 Apr 2019 19:06:48 +0200
From:   Marcel Holtmann <marcel@...tmann.org>
To:     Rocky Liao <rjliao@...eaurora.org>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Johan Hedberg <johan.hedberg@...il.com>,
        thierry.escande@...aro.org, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-bluetooth@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        bgodavar@...eaurora.org
Subject: Re: [PATCH v3 2/2] dt-bindings: net: bluetooth: Add device property
 firmware-name for QCA6174

Hi Rocky,

> This patch adds an optional device property "firmware-name" to allow the
> driver to load customized nvm firmware file based on this property.
> 
> Signed-off-by: Rocky Liao <rjliao@...eaurora.org>
> ---
> Changes in v3:
>  * added firmware-name instead of nvm-postfix to specify full firmware name
> ---
> Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 2 ++
> 1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> index 824c0e2..2bcea50 100644
> --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> @@ -16,6 +16,7 @@ Optional properties for compatible string qcom,qca6174-bt:
> 
>  - enable-gpios: gpio specifier used to enable chip
>  - clocks: clock provided to the controller (SUSCLK_32KHZ)
> + - firmware-name: specify the name of nvm firmware to load
> 
> Required properties for compatible string qcom,wcn3990-bt:
> 
> @@ -39,6 +40,7 @@ serial@...0000 {
> 
> 		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
> 		clocks = <&divclk4>;
> +		firmware-name = "nvm_00440302.bin";
> 	};

and how is this a firmware-name property. Wouldn’t this be more like nvm-file or something along these lines. This really needs to be cleared with Rob to pick the right property name.

Regards

Marcel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ