| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 3 May 2019 15:21:45 +0800
From: Chris Chiu <chiu@...lessm.com>
To: jes.sorensen@...il.com, kvalo@...eaurora.org, davem@...emloft.net
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux@...lessm.com,
Chris Chiu <chiu@...lessm.com>
Subject: [RFC PATCH 1/2] rtl8xxxu: Add rate adaptive related data
Add wireless mode, signal strength level, and rate table index
to tell the firmware that we need to adjust the tx rate bitmap
accordingly.
---
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 45 +++++++++++++++++++
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 45 ++++++++++++++++++-
2 files changed, 89 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 8828baf26e7b..771f58aa7cae 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1195,6 +1195,50 @@ struct rtl8723bu_c2h {
struct rtl8xxxu_fileops;
+/*mlme related.*/
+enum wireless_mode {
+ WIRELESS_MODE_UNKNOWN = 0,
+ //Sub-Element
+ WIRELESS_MODE_B = BIT(0), // tx: cck only , rx: cck only, hw: cck
+ WIRELESS_MODE_G = BIT(1), // tx: ofdm only, rx: ofdm & cck, hw: cck & ofdm
+ WIRELESS_MODE_A = BIT(2), // tx: ofdm only, rx: ofdm only, hw: ofdm only
+ WIRELESS_MODE_N_24G = BIT(3), // tx: MCS only, rx: MCS & cck, hw: MCS & cck
+ WIRELESS_MODE_N_5G = BIT(4), // tx: MCS only, rx: MCS & ofdm, hw: ofdm only
+ WIRELESS_AUTO = BIT(5),
+ WIRELESS_MODE_AC = BIT(6),
+ WIRELESS_MODE_MAX = (WIRELESS_MODE_B|WIRELESS_MODE_G|WIRELESS_MODE_A|WIRELESS_MODE_N_24G|WIRELESS_MODE_N_5G|WIRELESS_MODE_AC),
+};
+
+/* from rtlwifi/wifi.h */
+enum ratr_table_mode_new {
+ RATEID_IDX_BGN_40M_2SS = 0,
+ RATEID_IDX_BGN_40M_1SS = 1,
+ RATEID_IDX_BGN_20M_2SS_BN = 2,
+ RATEID_IDX_BGN_20M_1SS_BN = 3,
+ RATEID_IDX_GN_N2SS = 4,
+ RATEID_IDX_GN_N1SS = 5,
+ RATEID_IDX_BG = 6,
+ RATEID_IDX_G = 7,
+ RATEID_IDX_B = 8,
+ RATEID_IDX_VHT_2SS = 9,
+ RATEID_IDX_VHT_1SS = 10,
+ RATEID_IDX_MIX1 = 11,
+ RATEID_IDX_MIX2 = 12,
+ RATEID_IDX_VHT_3SS = 13,
+ RATEID_IDX_BGN_3SS = 14,
+};
+
+#define RTL8XXXU_RATR_STA_INIT 0
+#define RTL8XXXU_RATR_STA_HIGH 1
+#define RTL8XXXU_RATR_STA_MID 2
+#define RTL8XXXU_RATR_STA_LOW 3
+
+struct rtl8xxxu_rate_adaptive {
+ u16 wireless_mode;
+ u8 ratr_index;
+ u8 rssi_level; /* INIT, HIGH, MIDDLE, LOW */
+} __packed;
+
struct rtl8xxxu_priv {
struct ieee80211_hw *hw;
struct usb_device *udev;
@@ -1299,6 +1343,7 @@ struct rtl8xxxu_priv {
u8 pi_enabled:1;
u8 no_pape:1;
u8 int_buf[USB_INTR_CONTENT_LENGTH];
+ struct rtl8xxxu_rate_adaptive ra_info;
};
struct rtl8xxxu_rx_urb {
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 039e5ca9d2e4..360e9bd837e5 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4345,7 +4345,7 @@ void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
h2c.b_macid_cfg.ramask3 = (ramask >> 24) & 0xff;
h2c.ramask.arg = 0x80;
- h2c.b_macid_cfg.data1 = 0;
+ h2c.b_macid_cfg.data1 = priv->ra_info.ratr_index;
if (sgi)
h2c.b_macid_cfg.data1 |= BIT(7);
@@ -4485,6 +4485,43 @@ static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg)
rtl8xxxu_write8(priv, REG_INIRTS_RATE_SEL, rate_idx);
}
+static u16
+rtl8xxxu_wireless_mode(struct ieee80211_hw *hw, struct ieee80211_sta *sta)
+{
+ u16 network_type = WIRELESS_MODE_UNKNOWN;
+ u32 rate_mask;
+
+ rate_mask = (sta->supp_rates[0] & 0xfff) |
+ (sta->ht_cap.mcs.rx_mask[0] << 12) |
+ (sta->ht_cap.mcs.rx_mask[0] << 20);
+
+ if (hw->conf.chandef.chan->band == NL80211_BAND_5GHZ)
+ {
+ if (sta->vht_cap.vht_supported)
+ network_type = WIRELESS_MODE_AC;
+ else if (sta->ht_cap.ht_supported)
+ network_type = WIRELESS_MODE_N_5G;
+
+ network_type |= WIRELESS_MODE_A;
+ }
+ else
+ {
+ if (sta->vht_cap.vht_supported)
+ network_type = WIRELESS_MODE_AC;
+ else if (sta->ht_cap.ht_supported)
+ network_type = WIRELESS_MODE_N_24G;
+
+ if (sta->supp_rates[0] <= 0xf)
+ network_type |= WIRELESS_MODE_B;
+ else if (sta->supp_rates[0] & 0xf)
+ network_type |= (WIRELESS_MODE_B | WIRELESS_MODE_G);
+ else
+ network_type |= WIRELESS_MODE_G;
+ }
+
+ return network_type;
+}
+
static void
rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf, u32 changed)
@@ -4503,6 +4540,7 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
if (bss_conf->assoc) {
u32 ramask;
int sgi = 0;
+ struct rtl8xxxu_rate_adaptive *ra;
rcu_read_lock();
sta = ieee80211_find_sta(vif, bss_conf->bssid);
@@ -4527,6 +4565,11 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
sgi = 1;
rcu_read_unlock();
+ ra = &priv->ra_info;
+ ra->wireless_mode = rtl8xxxu_wireless_mode(hw, sta);
+ ra->ratr_index = RATEID_IDX_BGN_40M_2SS;
+ ra->rssi_level = RTL8XXXU_RATR_STA_INIT;
+
priv->fops->update_rate_mask(priv, ramask, sgi);
rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff);
--
2.21.0
Powered by blists - more mailing lists