netdev - Re: [PATCH V5] net: phy: tja11xx: Add TJA11xx PHY driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 22 May 2019 23:48:06 +0200
From:   Marek Vasut <marex@...x.de>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     netdev@...r.kernel.org, Florian Fainelli <f.fainelli@...il.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Jean Delvare <jdelvare@...e.com>, linux-hwmon@...r.kernel.org
Subject: Re: [PATCH V5] net: phy: tja11xx: Add TJA11xx PHY driver

On 5/18/19 4:14 PM, Andrew Lunn wrote:
> On Sat, May 18, 2019 at 01:51:23AM +0200, Marek Vasut wrote:
>> Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special
>> BroadRReach 100BaseT1 PHYs used in automotive.
> 
> Hi Marek
> 
>> +	}, {
>> +		PHY_ID_MATCH_MODEL(PHY_ID_TJA1101),
>> +		.name		= "NXP TJA1101",
>> +		.features       = PHY_BASIC_T1_FEATURES,
> 
> One thing i would like to do before this patch goes in is define
> ETHTOOL_LINK_MODE_100baseT1_Full_BIT in ethtool.h, and use it here.
> We could not do it earlier because were ran out of bits. But with
> PHYLIB now using bitmaps, rather than u32, we can.

So now that "[PATCH net-next 0/2] net: phy: T1 support" is posted, does
this patch require any change ? I don't think it does ?

[...]


-- 
Best regards,
Marek Vasut