| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8b0450c2-ad5e-ecaa-9958-df4da1dd6456@intel.com>
Date: Fri, 24 May 2019 12:18:32 +0200
From: Björn Töpel <bjorn.topel@...el.com>
To: Maxim Mikityanskiy <maximmi@...lanox.com>,
Alexei Starovoitov <ast@...nel.org>,
Daniel Borkmann <daniel@...earbox.net>,
Magnus Karlsson <magnus.karlsson@...el.com>
Cc: "bpf@...r.kernel.org" <bpf@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"David S. Miller" <davem@...emloft.net>,
Saeed Mahameed <saeedm@...lanox.com>,
Jonathan Lemon <bsd@...com>,
Tariq Toukan <tariqt@...lanox.com>,
Martin KaFai Lau <kafai@...com>,
Song Liu <songliubraving@...com>, Yonghong Song <yhs@...com>,
Jakub Kicinski <jakub.kicinski@...ronome.com>,
Maciej Fijalkowski <maciejromanfijalkowski@...il.com>
Subject: Re: [PATCH bpf-next v3 00/16] AF_XDP infrastructure improvements and
mlx5e support
On 2019-05-24 11:35, Maxim Mikityanskiy wrote:
> This series contains improvements to the AF_XDP kernel infrastructure
> and AF_XDP support in mlx5e. The infrastructure improvements are
> required for mlx5e, but also some of them benefit to all drivers, and
> some can be useful for other drivers that want to implement AF_XDP.
>
> The performance testing was performed on a machine with the following
> configuration:
>
> - 24 cores of Intel Xeon E5-2620 v3 @ 2.40 GHz
> - Mellanox ConnectX-5 Ex with 100 Gbit/s link
>
> The results with retpoline disabled, single stream:
>
> txonly: 33.3 Mpps (21.5 Mpps with queue and app pinned to the same CPU)
> rxdrop: 12.2 Mpps
> l2fwd: 9.4 Mpps
>
> The results with retpoline enabled, single stream:
>
> txonly: 21.3 Mpps (14.1 Mpps with queue and app pinned to the same CPU)
> rxdrop: 9.9 Mpps
> l2fwd: 6.8 Mpps
>
> v2 changes:
>
> Added patches for mlx5e and addressed the comments for v1. Rebased for
> bpf-next.
>
> v3 changes:
>
> Rebased for the newer bpf-next, resolved conflicts in libbpf. Addressed
> Björn's comments for coding style. Fixed a bug in error handling flow in
> mlx5e_open_xsk.
>
Maxim, this doesn't address the uapi concern we had on your v2.
Please refer to Magnus' comment here [1].
Please educate me why you cannot publish AF_XDP without the uapi change?
It's an extension, right? If so, then existing XDP/AF_XDP program can
use Mellanox ZC without your addition? It's great that Mellanox has a ZC
capable driver, but the uapi change is a NAK.
To reiterate; We'd like to get the queue setup/steering for AF_XDP
correct. I, and Magnus, dislike this approach. It requires a more
complicated XDP program, and is hard for regular users to understand.
Thanks,
Björn
[1]
https://lore.kernel.org/bpf/CAJ8uoz2UHk+5xPwz-STM9gkQZdm7r_=jsgaB0nF+mHgch=axPg@mail.gmail.com/
> Maxim Mikityanskiy (16):
> xsk: Add API to check for available entries in FQ
> xsk: Add getsockopt XDP_OPTIONS
> libbpf: Support getsockopt XDP_OPTIONS
> xsk: Extend channels to support combined XSK/non-XSK traffic
> xsk: Change the default frame size to 4096 and allow controlling it
> xsk: Return the whole xdp_desc from xsk_umem_consume_tx
> net/mlx5e: Replace deprecated PCI_DMA_TODEVICE
> net/mlx5e: Calculate linear RX frag size considering XSK
> net/mlx5e: Allow ICO SQ to be used by multiple RQs
> net/mlx5e: Refactor struct mlx5e_xdp_info
> net/mlx5e: Share the XDP SQ for XDP_TX between RQs
> net/mlx5e: XDP_TX from UMEM support
> net/mlx5e: Consider XSK in XDP MTU limit calculation
> net/mlx5e: Encapsulate open/close queues into a function
> net/mlx5e: Move queue param structs to en/params.h
> net/mlx5e: Add XSK support
>
> drivers/net/ethernet/intel/i40e/i40e_xsk.c | 12 +-
> drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 15 +-
> .../net/ethernet/mellanox/mlx5/core/Makefile | 2 +-
> drivers/net/ethernet/mellanox/mlx5/core/en.h | 147 +++-
> .../ethernet/mellanox/mlx5/core/en/params.c | 108 ++-
> .../ethernet/mellanox/mlx5/core/en/params.h | 87 ++-
> .../net/ethernet/mellanox/mlx5/core/en/xdp.c | 231 ++++--
> .../net/ethernet/mellanox/mlx5/core/en/xdp.h | 36 +-
> .../mellanox/mlx5/core/en/xsk/Makefile | 1 +
> .../ethernet/mellanox/mlx5/core/en/xsk/rx.c | 192 +++++
> .../ethernet/mellanox/mlx5/core/en/xsk/rx.h | 27 +
> .../mellanox/mlx5/core/en/xsk/setup.c | 223 ++++++
> .../mellanox/mlx5/core/en/xsk/setup.h | 25 +
> .../ethernet/mellanox/mlx5/core/en/xsk/tx.c | 108 +++
> .../ethernet/mellanox/mlx5/core/en/xsk/tx.h | 15 +
> .../ethernet/mellanox/mlx5/core/en/xsk/umem.c | 252 +++++++
> .../ethernet/mellanox/mlx5/core/en/xsk/umem.h | 34 +
> .../ethernet/mellanox/mlx5/core/en_ethtool.c | 21 +-
> .../mellanox/mlx5/core/en_fs_ethtool.c | 44 +-
> .../net/ethernet/mellanox/mlx5/core/en_main.c | 680 +++++++++++-------
> .../net/ethernet/mellanox/mlx5/core/en_rep.c | 12 +-
> .../net/ethernet/mellanox/mlx5/core/en_rx.c | 104 ++-
> .../ethernet/mellanox/mlx5/core/en_stats.c | 115 ++-
> .../ethernet/mellanox/mlx5/core/en_stats.h | 30 +
> .../net/ethernet/mellanox/mlx5/core/en_txrx.c | 42 +-
> .../ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 14 +-
> drivers/net/ethernet/mellanox/mlx5/core/wq.h | 5 -
> include/net/xdp_sock.h | 27 +-
> include/uapi/linux/if_xdp.h | 19 +
> net/xdp/xsk.c | 41 +-
> net/xdp/xsk_queue.h | 14 +
> samples/bpf/xdpsock_user.c | 52 +-
> tools/include/uapi/linux/if_xdp.h | 19 +
> tools/lib/bpf/xsk.c | 131 +++-
> tools/lib/bpf/xsk.h | 6 +-
> 35 files changed, 2389 insertions(+), 502 deletions(-)
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/Makefile
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.h
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.h
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.h
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/umem.c
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/umem.h
>
Powered by blists - more mailing lists