netdev - [PATCH v1 1/2] dt-bindings: net: dsa: qca8k: document reset-gpios property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <08e0fd513620f03a2207b9f32637cdb434ed8def.1561452044.git.chunkeey@gmail.com>
Date:   Tue, 25 Jun 2019 10:41:50 +0200
From:   Christian Lamparter <chunkeey@...il.com>
To:     netdev@...r.kernel.org
Cc:     Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        "David S . Miller" <davem@...emloft.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Andrew Lunn <andrew@...n.ch>
Subject: [PATCH v1 1/2] dt-bindings: net: dsa: qca8k: document reset-gpios property

This patch documents the qca8k's reset-gpios property that
can be used if the QCA8337N ends up in a bad state during
reset.

Signed-off-by: Christian Lamparter <chunkeey@...il.com>
---
 Documentation/devicetree/bindings/net/dsa/qca8k.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
index 93a7469e70d4..ccbc6d89325d 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -9,6 +9,10 @@ Required properties:
 - #size-cells: must be 0
 - #address-cells: must be 1
 
+Optional properties:
+
+- reset-gpios: GPIO to be used to reset the whole device
+
 Subnodes:
 
 The integrated switch subnode should be specified according to the binding
@@ -66,6 +70,7 @@ for the external mdio-bus configuration:
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
 			reg = <0x10>;
 
 			ports {
@@ -123,6 +128,7 @@ for the internal master mdio-bus configuration:
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
 			reg = <0x10>;
 
 			ports {
-- 
2.20.1