netdev - [PATCH v1 2/2] net: dsa: qca8k: introduce reset via gpio feature

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 25 Jun 2019 10:41:51 +0200
From:   Christian Lamparter <chunkeey@...il.com>
To:     netdev@...r.kernel.org
Cc:     Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        "David S . Miller" <davem@...emloft.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Andrew Lunn <andrew@...n.ch>
Subject: [PATCH v1 2/2] net: dsa: qca8k: introduce reset via gpio feature

The QCA8337(N) has a RESETn signal on Pin B42 that
triggers a chip reset if the line is pulled low.
The datasheet says that: "The active low duration
must be greater than 10 ms".

This can hopefully fix some of the issues related
to pin strapping in OpenWrt for the EA8500 which
suffers from detection issues after a SoC reset.

Please note that the qca8k_probe() function does
currently require to read the chip's revision
register for identification purposes.

Signed-off-by: Christian Lamparter <chunkeey@...il.com>
---
 drivers/net/dsa/qca8k.c | 15 +++++++++++++++
 drivers/net/dsa/qca8k.h |  2 ++
 2 files changed, 17 insertions(+)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index c4fa400efdcc..27709f866c23 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -14,6 +14,7 @@
 #include <linux/of_platform.h>
 #include <linux/if_bridge.h>
 #include <linux/mdio.h>
+#include <linux/gpio.h>
 #include <linux/etherdevice.h>
 
 #include "qca8k.h"
@@ -1046,6 +1047,20 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 	priv->bus = mdiodev->bus;
 	priv->dev = &mdiodev->dev;
 
+	priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
+						   GPIOD_ASIS);
+	if (IS_ERR(priv->reset_gpio))
+		return PTR_ERR(priv->reset_gpio);
+
+	if (priv->reset_gpio) {
+		gpiod_set_value_cansleep(priv->reset_gpio, 1);
+		/* The active low duration must be greater than 10 ms
+		 * and checkpatch.pl wants 20 ms.
+		 */
+		msleep(20);
+		gpiod_set_value_cansleep(priv->reset_gpio, 0);
+	}
+
 	/* read the switches ID register */
 	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
 	id >>= QCA8K_MASK_CTRL_ID_S;
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 91557433ce2f..42d6ea24eb14 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -10,6 +10,7 @@
 
 #include <linux/delay.h>
 #include <linux/regmap.h>
+#include <linux/gpio.h>
 
 #define QCA8K_NUM_PORTS					7
 
@@ -174,6 +175,7 @@ struct qca8k_priv {
 	struct mutex reg_mutex;
 	struct device *dev;
 	struct dsa_switch_ops ops;
+	struct gpio_desc *reset_gpio;
 };
 
 struct qca8k_mib_desc {
-- 
2.20.1