[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190628223516.9368-1-saeedm@mellanox.com>
Date: Fri, 28 Jun 2019 22:35:46 +0000
From: Saeed Mahameed <saeedm@...lanox.com>
To: Saeed Mahameed <saeedm@...lanox.com>,
Leon Romanovsky <leonro@...lanox.com>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-rdma@...r.kernel.org" <linux-rdma@...r.kernel.org>
Subject: [PATCH mlx5-next 00/18] Mellanox, mlx5 E-Switch and low level updates
Hi All,
This series includes some low level updates mainly in the E-Switch
netdev and rdma vport representors areas.
From Parav and Huy:
1) Added hardware bits and structures definitions for sub-functions
2) Small code cleanup and improvement for PF pci driver.
From Bodong:
3) Use the correct name semantics of vport index and vport number
4) Cleanup the rep and netdev reference when unloading IB rep.
5) Bluefield (ECPF) updates and refactoring for better E-Switch
management on ECPF embedded CPU NIC:
5.1) Consolidate querying eswitch number of VFs
5.2) Register event handler at the correct E-Switch init stage
5.3) Setup PF's inline mode and vlan pop when the ECPF is the
E-Swtich manager ( the host PF is basically a VF ).
5.4) Handle Vport UC address changes in switchdev mode.
From Shay:
6) Add support for MCQI and MCQS hardware registers.
In case of no objections these patches will be applied to mlx5-next and
will be sent later as pull request to both rdma-next and net-next trees.
Thanks,
Saeed.
---
Bodong Wang (12):
net/mlx5: E-Switch, Use vport index when init rep
{IB, net}/mlx5: E-Switch, Use index of rep for vport to IB port
mapping
RDMA/mlx5: Cleanup rep when doing unload
net/mlx5: Don't handle VF func change if host PF is disabled
net/mlx5: E-Switch, Use correct flags when configuring vlan
net/mlx5: Handle host PF vport mac/guid for ECPF
net/mlx5: E-Switch, Refactor eswitch SR-IOV interface
net/mlx5: E-Switch, Consolidate eswitch function number of VFs
net/mlx5: E-Switch, Reg/unreg function changed event at correct stage
net/mlx5: E-Switch, Use iterator for vlan and min-inline setups
net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop
net/mlx5: E-Switch, Handle UC address change in switchdev mode
Huy Nguyen (1):
net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_type
Parav Pandit (4):
net/mlx5: Add hardware definitions for sub functions
net/mlx5: Move pci status reg access mutex to mlx5_pci_init
net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devices
net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs
Shay Agroskin (1):
net/mlx5: Added MCQI and MCQS registers' description to ifc
drivers/infiniband/hw/mlx5/ib_rep.c | 22 +-
drivers/infiniband/hw/mlx5/ib_rep.h | 2 +-
drivers/infiniband/hw/mlx5/main.c | 2 +-
drivers/infiniband/hw/mlx5/mlx5_ib.h | 1 -
drivers/net/ethernet/mellanox/mlx5/core/dev.c | 9 +-
.../ethernet/mellanox/mlx5/core/en_dcbnl.c | 2 +-
.../net/ethernet/mellanox/mlx5/core/en_main.c | 4 +-
.../net/ethernet/mellanox/mlx5/core/en_rep.c | 8 +-
.../net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +-
.../net/ethernet/mellanox/mlx5/core/eswitch.c | 151 ++++++++------
.../net/ethernet/mellanox/mlx5/core/eswitch.h | 44 +++-
.../mellanox/mlx5/core/eswitch_offloads.c | 196 ++++++++----------
.../ethernet/mellanox/mlx5/core/fpga/conn.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/lag.c | 4 +-
.../net/ethernet/mellanox/mlx5/core/main.c | 7 +-
.../net/ethernet/mellanox/mlx5/core/rdma.c | 2 +-
.../net/ethernet/mellanox/mlx5/core/sriov.c | 27 +--
.../net/ethernet/mellanox/mlx5/core/vport.c | 28 ++-
include/linux/mlx5/driver.h | 13 +-
include/linux/mlx5/eswitch.h | 8 +-
include/linux/mlx5/mlx5_ifc.h | 161 +++++++++++++-
include/linux/mlx5/vport.h | 4 +-
22 files changed, 446 insertions(+), 253 deletions(-)
--
2.21.0
Powered by blists - more mailing lists