netdev - Re: [PATCH v1 net-next] net: stmmac: enable clause 45 mdio support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190704135420.GD13859@lunn.ch>
Date:   Thu, 4 Jul 2019 15:54:20 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     "Voon, Weifeng" <weifeng.voon@...el.com>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Jose Abreu <joabreu@...opsys.com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        biao huang <biao.huang@...iatek.com>,
        "Ong, Boon Leong" <boon.leong.ong@...el.com>,
        "Kweh, Hock Leong" <hock.leong.kweh@...el.com>
Subject: Re: [PATCH v1 net-next] net: stmmac: enable clause 45 mdio support

On Thu, Jul 04, 2019 at 06:05:23AM +0000, Voon, Weifeng wrote:
> > > > > @@ -155,22 +171,26 @@ static int stmmac_mdio_read(struct mii_bus
> > > > > *bus,
> > > > int phyaddr, int phyreg)
> > > > >  	struct stmmac_priv *priv = netdev_priv(ndev);
> > > > >  	unsigned int mii_address = priv->hw->mii.addr;
> > > > >  	unsigned int mii_data = priv->hw->mii.data;
> > > > > -	u32 v;
> > > > > -	int data;
> > > > >  	u32 value = MII_BUSY;
> > > > > +	int data = 0;
> > > > > +	u32 v;
> > > > >
> > > > >  	value |= (phyaddr << priv->hw->mii.addr_shift)
> > > > >  		& priv->hw->mii.addr_mask;
> > > > >  	value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw-
> > > > >mii.reg_mask;
> > > > >  	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
> > > > >  		& priv->hw->mii.clk_csr_mask;
> > > > > -	if (priv->plat->has_gmac4)
> > > > > +	if (priv->plat->has_gmac4) {
> > > > >  		value |= MII_GMAC4_READ;
> > > > > +		if (phyreg & MII_ADDR_C45)
> > > > > +			stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
> > > > > +	}
> > > > >
> > > > >  	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v &
> > > > MII_BUSY),
> > > > >  			       100, 10000))
> > > > >  		return -EBUSY;
> > > > >
> > > > > +	writel(data, priv->ioaddr + mii_data);
> > > >
> > > > That looks odd. Could you explain why it is needed.
> > > >
> > > > Thanks
> > > > 	Andrew
> > >
> > > Hi Andrew,
> > > This mdio c45 support needed to access DWC xPCS which is a Clause-45
> > 
> > I mean it looks odd doing a write to the data register in the middle of
> > stmmac_mdio_read().
> 
> MAC is using an indirect access to access mdio devices. In order to read,
> the driver needs to write into both mii_data and mii_address to select 
> c45, read/write command, phy address, address to read, and etc. 

Yes, that is all clear. The stmmac_mdio_c45_setup() does part of this
setup. There is also a write to mii_address which i snipped out when
replying. But why do you need to write to the data registers during a
read? C22 does not need this write. Are there some bits in the top of
the data register which are relevant to C45?

Thanks
    Andrew