netdev - [PATCH net-next 2/3] dt-bindings: net: fsl: enetc: Add bindings for the central MDIO PCIe endpoint

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1563894955-545-3-git-send-email-claudiu.manoil@nxp.com>
Date:   Tue, 23 Jul 2019 18:15:54 +0300
From:   Claudiu Manoil <claudiu.manoil@....com>
To:     "David S . Miller" <davem@...emloft.net>
Cc:     Rob Herring <robh+dt@...nel.org>, Li Yang <leoyang.li@....com>,
        alexandru.marginean@....com, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH net-next 2/3] dt-bindings: net: fsl: enetc: Add bindings for the central MDIO PCIe endpoint

The on-chip PCIe root complex that integrates the ENETC ethernet
controllers also integrates a PCIe enpoint for the MDIO controller
provinding for cetralized control of the ENETC mdio bus.
Add bindings for this "central" MDIO Integrated PCIe Endpoit.

Signed-off-by: Claudiu Manoil <claudiu.manoil@....com>
---
 .../devicetree/bindings/net/fsl-enetc.txt     | 42 +++++++++++++++++--
 1 file changed, 39 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
index 25fc687419db..c090f6df7a39 100644
--- a/Documentation/devicetree/bindings/net/fsl-enetc.txt
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
@@ -11,7 +11,9 @@ Required properties:
 		  to parent node bindings.
 - compatible	: Should be "fsl,enetc".
 
-1) The ENETC external port is connected to a MDIO configurable phy:
+1. The ENETC external port is connected to a MDIO configurable phy
+
+1.1. Using the local ENETC Port MDIO interface
 
 In this case, the ENETC node should include a "mdio" sub-node
 that in turn should contain the "ethernet-phy" node describing the
@@ -47,8 +49,42 @@ Example:
 		};
 	};
 
-2) The ENETC port is an internal port or has a fixed-link external
-connection:
+1.2. Using the central MDIO PCIe enpoint device
+
+In this case, the mdio node should be defined as another PCIe
+endpoint node, at the same level with the ENETC port nodes.
+
+Required properties:
+
+- reg		: Specifies PCIe Device Number and Function
+		  Number of the ENETC endpoint device, according
+		  to parent node bindings.
+- compatible	: Should be "fsl,enetc-mdio".
+
+The remaining required mdio bus properties are standard, their bindings
+already defined in Documentation/devicetree/bindings/net/mdio.txt.
+
+Example:
+
+	ethernet@0,0 {
+		compatible = "fsl,enetc";
+		reg = <0x000000 0 0 0 0>;
+		phy-handle = <&sgmii_phy0>;
+		phy-connection-type = "sgmii";
+	};
+
+	mdio@0,3 {
+		compatible = "fsl,enetc-mdio";
+		reg = <0x000300 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sgmii_phy0: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+	};
+
+2. The ENETC port is an internal port or has a fixed-link external
+connection
 
 In this case, the ENETC port node defines a fixed link connection,
 as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
-- 
2.17.1