| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 23 Jul 2019 20:49:27 +0000
From: Saeed Mahameed <saeedm@...lanox.com>
To: "claudiu.manoil@....com" <claudiu.manoil@....com>,
"davem@...emloft.net" <davem@...emloft.net>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"leoyang.li@....com" <leoyang.li@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"alexandru.marginean@....com" <alexandru.marginean@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next 1/3] enetc: Add mdio bus driver for the PCIe MDIO
endpoint
On Tue, 2019-07-23 at 18:15 +0300, Claudiu Manoil wrote:
> ENETC ports can manage the MDIO bus via local register
> interface. However there's also a centralized way
> to manage the MDIO bus, via the MDIO PCIe endpoint
> device integrated by the same root complex that also
> integrates the ENETC ports (eth controllers).
>
> Depending on board design and use case, centralized
> access to MDIO may be better than using local ENETC
> port registers. For instance, on the LS1028A QDS board
> where MDIO muxing is requiered. Also, the LS1028A on-chip
> switch doesn't have a local MDIO register interface.
>
> The current patch registers the above PCIe enpoint as a
> separate MDIO bus and provides a driver for it by re-using
> the code used for local MDIO access. It also allows the
> ENETC port PHYs to be managed by this driver if the local
> "mdio" node is missing from the ENETC port node.
>
> Signed-off-by: Claudiu Manoil <claudiu.manoil@....com>
> ---
> .../net/ethernet/freescale/enetc/enetc_mdio.c | 90
> +++++++++++++++++++
> .../net/ethernet/freescale/enetc/enetc_pf.c | 5 +-
> 2 files changed, 94 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
> b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
> index 77b9cd10ba2b..efa8a29f463d 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
> @@ -197,3 +197,93 @@ void enetc_mdio_remove(struct enetc_pf *pf)
> mdiobus_free(pf->mdio);
> }
> }
> +
> +#define ENETC_MDIO_DEV_ID 0xee01
> +#define ENETC_MDIO_DEV_NAME "FSL PCIe IE Central MDIO"
> +#define ENETC_MDIO_BUS_NAME ENETC_MDIO_DEV_NAME " Bus"
> +#define ENETC_MDIO_DRV_NAME ENETC_MDIO_DEV_NAME " driver"
> +#define ENETC_MDIO_DRV_ID "fsl_enetc_mdio"
> +
> +static int enetc_pci_mdio_probe(struct pci_dev *pdev,
> + const struct pci_device_id *ent)
> +{
> + struct device *dev = &pdev->dev;
> + struct mii_bus *bus;
> + int err;
> +
> + bus = mdiobus_alloc_size(sizeof(u32 *));
> + if (!bus)
> + return -ENOMEM;
> +
> + bus->name = ENETC_MDIO_BUS_NAME;
> + bus->read = enetc_mdio_read;
> + bus->write = enetc_mdio_write;
> + bus->parent = dev;
> + snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
> +
> + pcie_flr(pdev);
> + err = pci_enable_device_mem(pdev);
> + if (err) {
> + dev_err(dev, "device enable failed\n");
mdiobus_free(bus) is missing here and in every error path.
> + return err;
> + }
> +
> + err = pci_request_mem_regions(pdev, ENETC_MDIO_DRV_ID);
> + if (err) {
> + dev_err(dev, "pci_request_regions failed\n");
> + goto err_pci_mem_reg;
> + }
> +
> + bus->priv = pci_iomap_range(pdev, 0, ENETC_MDIO_REG_OFFSET, 0);
> + if (!bus->priv) {
> + err = -ENXIO;
> + dev_err(dev, "ioremap failed\n");
> + goto err_ioremap;
> + }
> +
> + err = of_mdiobus_register(bus, dev->of_node);
> + if (err)
> + goto err_mdiobus_reg;
> +
> + pci_set_drvdata(pdev, bus);
> +
> + return 0;
> +
> +err_mdiobus_reg:
> + iounmap(bus->priv);
> +err_ioremap:
> + pci_release_mem_regions(pdev);
> +err_pci_mem_reg:
> + pci_disable_device(pdev);
> +
> + return err;
> +}
> +
> +static void enetc_pci_mdio_remove(struct pci_dev *pdev)
> +{
> + struct mii_bus *bus = pci_get_drvdata(pdev);
> +
> + mdiobus_unregister(bus);
> + iounmap(bus->priv);
> + mdiobus_free(bus);
> +
this should come last to be symmetrical with probe flow.
> + pci_release_mem_regions(pdev);
> + pci_disable_device(pdev);
> +}
> +
> +static const struct pci_device_id enetc_pci_mdio_id_table[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, ENETC_MDIO_DEV_ID) },
> + { 0, } /* End of table. */
> +};
> +MODULE_DEVICE_TABLE(pci, enetc_mdio_id_table);
> +
> +static struct pci_driver enetc_pci_mdio_driver = {
> + .name = ENETC_MDIO_DRV_ID,
> + .id_table = enetc_pci_mdio_id_table,
> + .probe = enetc_pci_mdio_probe,
> + .remove = enetc_pci_mdio_remove,
> +};
> +module_pci_driver(enetc_pci_mdio_driver);
> +
> +MODULE_DESCRIPTION(ENETC_MDIO_DRV_NAME);
> +MODULE_LICENSE("Dual BSD/GPL");
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> index 258b3cb38a6f..7d6513ff8507 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> @@ -750,6 +750,7 @@ static int enetc_of_get_phy(struct
> enetc_ndev_priv *priv)
> {
> struct enetc_pf *pf = enetc_si_priv(priv->si);
> struct device_node *np = priv->dev->of_node;
> + struct device_node *mdio_np;
> int err;
>
> if (!np) {
> @@ -773,7 +774,9 @@ static int enetc_of_get_phy(struct
> enetc_ndev_priv *priv)
> priv->phy_node = of_node_get(np);
> }
>
> - if (!of_phy_is_fixed_link(np)) {
> + mdio_np = of_get_child_by_name(np, "mdio");
> + if (mdio_np) {
> + of_node_put(mdio_np);
> err = enetc_mdio_probe(pf);
> if (err) {
> of_node_put(priv->phy_node);
Powered by blists - more mailing lists