netdev - Re: [PATCH v4 1/4] dt-bindings: net: phy: Add subnode for LED configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 2 Aug 2019 18:57:55 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Matthias Kaehlcke <mka@...omium.org>
Cc:     "David S . Miller" <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Douglas Anderson <dianders@...omium.org>
Subject: Re: [PATCH v4 1/4] dt-bindings: net: phy: Add subnode for LED
 configuration

On Thu, Aug 01, 2019 at 12:07:56PM -0700, Matthias Kaehlcke wrote:
> The LED behavior of some Ethernet PHYs is configurable. Add an
> optional 'leds' subnode with a child node for each LED to be
> configured. The binding aims to be compatible with the common
> LED binding (see devicetree/bindings/leds/common.txt).
> 
> A LED can be configured to be 'on' when a link with a certain speed
> is active, or to blink on RX/TX activity. For the configuration to
> be effective it needs to be supported by the hardware and the
> corresponding PHY driver.
> 
> Suggested-by: Andrew Lunn <andrew@...n.ch>
> Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
> ---
> Changes in v4:
> - patch added to the series
> ---
>  .../devicetree/bindings/net/ethernet-phy.yaml | 47 +++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> index f70f18ff821f..81c5aacc89a5 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> @@ -153,6 +153,38 @@ properties:
>        Delay after the reset was deasserted in microseconds. If
>        this property is missing the delay will be skipped.
>  
> +patternProperties:
> +  "^leds$":
> +    type: object
> +    description:
> +      Subnode with configuration of the PHY LEDs.
> +
> +    patternProperties:
> +      "^led@[0-9]+$":
> +        type: object
> +        description:
> +          Subnode with the configuration of a single PHY LED.
> +
> +    properties:
> +      reg:
> +        description:
> +          The ID number of the LED, typically corresponds to a hardware ID.
> +        $ref: "/schemas/types.yaml#/definitions/uint32"
> +
> +      linux,default-trigger:
> +        description:
> +          This parameter, if present, is a string specifying the trigger
> +          assigned to the LED. Supported triggers are:
> +            "phy_link_10m_active" - LED will be on when a 10Mb/s link is active
> +            "phy_link_100m_active" - LED will be on when a 100Mb/s link is active
> +            "phy_link_1g_active" - LED will be on when a 1Gb/s link is active
> +            "phy_link_10g_active" - LED will be on when a 10Gb/s link is active
> +            "phy_activity" - LED will blink when data is received or transmitted

Matthias

We should think a bit more about these names.

I can see in future needing 1G link, but it blinks off when there is
active traffic? So phy_link_1g_active could be confusing, and very similar to
phy_link_1g_activity? So maybe 

> +            "phy_link_10m" - LED will be solid on when a 10Mb/s link is active
> +            "phy_link_100m" - LED will be solid on when a 100Mb/s link is active
> +            "phy_link_1g" - LED will be solid on when a 1Gb/s link is active

etc.

And then in the future we can have

               "phy_link_1g_activity' - LED will be on when 1Gbp/s
                                        link is active and blink off
                                        with activity.

What other use cases do we have? I don't want to support everything,
but we should be able to represent the most common modes without the
names getting too confusing.

      Andrew