netdev - Re: [PATCH v4 2/4] net: phy: Add function to retrieve LED configuration from the DT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 2 Aug 2019 10:59:18 -0700
From:   Matthias Kaehlcke <mka@...omium.org>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     "David S . Miller" <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Douglas Anderson <dianders@...omium.org>
Subject: Re: [PATCH v4 2/4] net: phy: Add function to retrieve LED
 configuration from the DT

On Fri, Aug 02, 2019 at 06:38:10PM +0200, Andrew Lunn wrote:
> On Thu, Aug 01, 2019 at 12:07:57PM -0700, Matthias Kaehlcke wrote:
> > Add a phylib function for retrieving PHY LED configuration that
> > is specified in the device tree using the generic binding. LEDs
> > can be configured to be 'on' for a certain link speed or to blink
> > when there is TX/RX activity.
> > 
> > Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
> > ---
> > Changes in v4:
> > - patch added to the series
> > ---
> >  drivers/net/phy/phy_device.c | 50 ++++++++++++++++++++++++++++++++++++
> >  include/linux/phy.h          | 15 +++++++++++
> >  2 files changed, 65 insertions(+)
> > 
> > diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> > index 6b5cb87f3866..b4b48de45712 100644
> > --- a/drivers/net/phy/phy_device.c
> > +++ b/drivers/net/phy/phy_device.c
> > @@ -2188,6 +2188,56 @@ static bool phy_drv_supports_irq(struct phy_driver *phydrv)
> >  	return phydrv->config_intr && phydrv->ack_interrupt;
> >  }
> >  
> > +int of_get_phy_led_cfg(struct phy_device *phydev, int led,
> > +		       struct phy_led_config *cfg)
> > +{
> > +	struct device_node *np, *child;
> > +	const char *trigger;
> > +	int ret;
> > +
> > +	if (!IS_ENABLED(CONFIG_OF_MDIO))
> > +		return -ENOENT;
> > +
> > +	np = of_find_node_by_name(phydev->mdio.dev.of_node, "leds");
> > +	if (!np)
> > +		return -ENOENT;
> > +
> > +	for_each_child_of_node(np, child) {
> > +		u32 val;
> > +
> > +		if (!of_property_read_u32(child, "reg", &val)) {
> > +			if (val == (u32)led)
> > +				break;
> > +		}
> > +	}
> 
> Hi Matthias
> 
> This is leaking references to np and child. In the past we have not
> cared about this too much, but we are now getting patches adding the
> missing releases. So it would be good to fix this.

Good point, I'll fix it in the next revision.

Thanks

Matthias