netdev - Re: [RFC PATCH v4 net-next 05/11] dt-bindings: net: ti: add new cpsw switch driver bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <8c10a935-83f8-6a78-c3d7-25e70d6e0278@ti.com>
Date:   Thu, 24 Oct 2019 13:26:14 +0300
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     Rob Herring <robh@...nel.org>
CC:     <netdev@...r.kernel.org>,
        Ilias Apalodimas <ilias.apalodimas@...aro.org>,
        Andrew Lunn <andrew@...n.ch>,
        "David S . Miller" <davem@...emloft.net>,
        Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
        Jiri Pirko <jiri@...nulli.us>,
        Florian Fainelli <f.fainelli@...il.com>,
        Sekhar Nori <nsekhar@...com>, <linux-kernel@...r.kernel.org>,
        <linux-omap@...r.kernel.org>,
        Murali Karicheri <m-karicheri2@...com>,
        Ivan Vecera <ivecera@...hat.com>, <devicetree@...r.kernel.org>
Subject: Re: [RFC PATCH v4 net-next 05/11] dt-bindings: net: ti: add new cpsw
 switch driver bindings

Hi Rob,

Thank you for you review and sorry for delay - I seems missed your mail and found it only now
while preparing new version of the series (v5).

On 10/07/2019 01:48, Rob Herring wrote:
> On Fri, Jun 21, 2019 at 09:13:08PM +0300, Grygorii Strashko wrote:
>> Add bindings for the new TI CPSW switch driver. Comparing to the legacy
>> bindings (net/cpsw.txt):
>> - ports definition follows DSA bindings (net/dsa/dsa.txt) and ports can be
>> marked as "disabled" if not physically wired.
>> - ports definition follows DSA bindings (net/dsa/dsa.txt) and ports can be
>> marked as "disabled" if not physically wired.
>> - all deprecated properties dropped;
>> - all legacy propertiies dropped which represents constant HW cpapbilities
>> (cpdma_channels, ale_entries, bd_ram_size, mac_control, slaves,
>> active_slave)
>> - cpts properties grouped in "cpts" sub-node
>>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
>> ---
>>   .../bindings/net/ti,cpsw-switch.txt           | 147 ++++++++++++++++++
>>   1 file changed, 147 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/net/ti,cpsw-switch.txt
>>
>> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.txt b/Documentation/devicetree/bindings/net/ti,cpsw-switch.txt
>> new file mode 100644
>> index 000000000000..787219cddccd
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.txt
>> @@ -0,0 +1,147 @@
>> +TI SoC Ethernet Switch Controller Device Tree Bindings (new)
>> +------------------------------------------------------
>> +
>> +The 3-port switch gigabit ethernet subsystem provides ethernet packet
>> +communication and can be configured as an ethernet switch. It provides the
>> +gigabit media independent interface (GMII),reduced gigabit media
>> +independent interface (RGMII), reduced media independent interface (RMII),
>> +the management data input output (MDIO) for physical layer device (PHY)
>> +management.
>> +
>> +Required properties:
>> +- compatible : be one of the below:
>> +	  "ti,cpsw-switch" for backward compatible
>> +	  "ti,am335x-cpsw-switch" for AM335x controllers
>> +	  "ti,am4372-cpsw-switch" for AM437x controllers
>> +	  "ti,dra7-cpsw-switch" for DRA7x controllers
>> +- reg : physical base address and size of the CPSW module IO range
>> +- ranges : shall contain the CPSW module IO range available for child devices
>> +- clocks : should contain the CPSW functional clock
>> +- clock-names : should be "fck"
>> +	See bindings/clock/clock-bindings.txt
>> +- interrupts : should contain CPSW RX, TX, MISC, RX_THRESH interrupts
>> +- interrupt-names : should contain "rx_thresh", "rx", "tx", "misc"
> 
> What's the defined order because it's not consistent here.

fixed.

I've fixed mostly all your comments, just some clarifications below.

> 
>> +	See bindings/interrupt-controller/interrupts.txt
>> +
>> +Optional properties:
>> +- syscon : phandle to the system control device node which provides access to

...

>> +	- local-mac-address : See [1]
>> +
>> +- mdio : CPSW MDIO bus block description
>> +	- bus_freq : MDIO Bus frequency
>> +	See bindings/net/mdio.txt and davinci-mdio.txt
> 
> Standard properties clock-frequency or bus-frequency would have been
> better...

Davinci MDIO driver and its bindings are reused here as is.
So I'd like to avoid such changes here, but if you think it's right, I can try add
bus-frequency to standard MDIO bindings (mdio.yaml) as separate change.

> 
>> +
>> +- cpts : The Common Platform Time Sync (CPTS) module description
>> +	- clocks : should contain the CPTS reference clock
>> +	- clock-names : should be "cpts"
>> +	See bindings/clock/clock-bindings.txt
>> +
>> +	Optional properties - all ports:
>> +	- cpts_clock_mult : Numerator to convert input clock ticks into ns
>> +	- cpts_clock_shift : Denominator to convert input clock ticks into ns
>> +			  Mult and shift will be calculated basing on CPTS
>> +			  rftclk frequency if both cpts_clock_shift and
>> +			  cpts_clock_mult properties are not provided.
> 
> Should have 'ti' prefix and use '-' rather than '_'. However, these are
> already defined somewhere else, right? I can't tell that from reading
> this.

The same here - CPTS is reused here.

> 
>> +
>> +[1] See Documentation/devicetree/bindings/net/ethernet.txt
>> +
>> +Examples - SOC:

[...]

-- 
Best regards,
grygorii