netdev - Re: [PATCH 4/5] dt-bindings: net: document loongson.pci-gmac

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191031204202.GB30739@netronome.com>
Date:   Thu, 31 Oct 2019 21:42:03 +0100
From:   Simon Horman <simon.horman@...ronome.com>
To:     Jiaxun Yang <jiaxun.yang@...goat.com>
Cc:     linux-mips@...r.kernel.org, davem@...emloft.net,
        robh+dt@...nel.org, mark.rutland@....com, axboe@...nel.dk,
        peppe.cavallaro@...com, alexandre.torgue@...com,
        joabreu@...opsys.com, bhelgaas@...gle.com, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-ide@...r.kernel.org,
        linux-pci@...r.kernel.org
Subject: Re: [PATCH 4/5] dt-bindings: net: document loongson.pci-gmac

On Thu, Oct 31, 2019 at 06:57:16PM +0800, Jiaxun Yang wrote:
> 
> 在 2019/10/31 下午4:35, Simon Horman 写道:
> > Hi Jiaxun,
> > 
> > thanks for your patch.
> > 
> > On Wed, Oct 30, 2019 at 09:53:46PM +0800, Jiaxun Yang wrote:
> > > This binding will provide extra information for PCI enabled
> > > device.
> > > 
> > > Signed-off-by: Jiaxun Yang <jiaxun.yang@...goat.com>
> > Please verify the bindings using dtbs_check as described in
> > Documentation/devicetree/writing-schema.rst
> > 
> > > ---
> > >   .../net/wireless/loongson,pci-gmac.yaml       | 71 +++++++++++++++++++
> > >   1 file changed, 71 insertions(+)
> > >   create mode 100644 Documentation/devicetree/bindings/net/wireless/loongson,pci-gmac.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/net/wireless/loongson,pci-gmac.yaml b/Documentation/devicetree/bindings/net/wireless/loongson,pci-gmac.yaml
> > > new file mode 100644
> > > index 000000000000..5f764bd46735
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/net/wireless/loongson,pci-gmac.yaml
> > > @@ -0,0 +1,71 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml#
> > The id does not match the filename of the schema.
> > 
> > i.e. the above should be:
> > 
> > 	$id: http://devicetree.org/schemas/net/wireless/loongson,pci-gmac.yaml#
> > 
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Loongson PCI GMAC Device Tree Bindings
> > > +
> > > +allOf:
> > > +  - $ref: "snps,dwmac.yaml#"
> > snps,dwmac.yaml# is in the parent directory relative to loongson,pci-gmac.yaml.
> > So I think the above needs to be:
> > 
> > 	$ref: "../snps,dwmac.yaml#"
> > 
> > > +
> > > +maintainers:
> > > +  - Jiaxun Yang <jiaxun.yang@...goat.com>
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: loongson,pci-gmac
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    minItems: 1
> > > +    maxItems: 3
> > > +    items:
> > > +      - description: Combined signal for various interrupt events
> > > +      - description: The interrupt to manage the remote wake-up packet detection
> > > +      - description: The interrupt that occurs when Rx exits the LPI state
> > > +
> > > +  interrupt-names:
> > > +    minItems: 1
> > > +    maxItems: 3
> > > +    items:
> > > +      - const: macirq
> > > +      - const: eth_wake_irq
> > > +      - const: eth_lpi
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: GMAC main clock
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: stmmaceth
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - interrupts
> > > +  - interrupt-names
> > > +  - clocks
> > > +  - clock-names
> > > +  - phy-mode
> > > +
> > > +examples:
> > > +  - |
> > > +    gmac: ethernet@ {
> > I would have expected a bus address here, f.e.:
> > 
> > 	gmac: ethernet@...0001800
> > 
> > > +        compatible = "loongson,pci-irq";
> > > +        reg = <0x00001800 0 0 0 0>;
> > I think there is one to many cell in the above, perhaps it should be.
> > 
> > 	reg = <0x00001800 0 0 0>;
> > 
> > Also, I would expect the registers to be wider than 0, i.e. no registers.
> 
> Hi Simon,
> 
> Thanks for your suggestions above, will fix in v1.
> 
> Here, the reg domain is a standard 5-cell representing a PCI device,
> 
> See: Documentation/devicetree/bindings/pci/pci.txt and IEEE Std 1275-1994,<https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/pci/pci.txt>
> 
> Should I add some description?

Thanks, sorry for missing that.
As that is the case I think you need something like the following
as an example that compiles.

examples:
  - |
    pcie@0 {
        reg = <0 0 0 0>;
        #size-cells = <2>;
        #address-cells = <3>;
        ranges = <0 0 0 0 0 0>;
        device_type = "pci";

        gmac: ethernet@...0 {
            compatible = "loongson,pci-irq";
            reg = <0x00001800 0 0 0 0>;
            interrupts = <12>, <13>;
            interrupt-names = "macirq", "eth_lpi";
            clocks =  <&clk_pch_gmac>;
            clock-names = "stmmaceth";
            phy-mode = "rgmii";
        };
    };