| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1573574048-12251-1-git-send-email-Bryan.Whitehead@microchip.com>
Date: Tue, 12 Nov 2019 10:54:08 -0500
From: Bryan Whitehead <Bryan.Whitehead@...rochip.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <UNGLinuxDriver@...rochip.com>
Subject: [PATCH v1 net-next] mscc.c: Add support for additional VSC PHYs
Add support for the following VSC PHYs
VSC8504, VSC8552, VSC8572,
VSC8562, VSC8564, VSC8575, VSC8582
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@...rochip.com>
---
drivers/net/phy/mscc.c | 182 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 182 insertions(+)
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 805cda3..8933681 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -253,12 +253,18 @@ enum rgmii_rx_clock_delay {
#define MSCC_PHY_TR_MSB 18
/* Microsemi PHY ID's */
+#define PHY_ID_VSC8504 0x000704c0
#define PHY_ID_VSC8514 0x00070670
#define PHY_ID_VSC8530 0x00070560
#define PHY_ID_VSC8531 0x00070570
#define PHY_ID_VSC8540 0x00070760
#define PHY_ID_VSC8541 0x00070770
+#define PHY_ID_VSC8552 0x000704e0
+#define PHY_ID_VSC856X 0x000707e0
+#define PHY_ID_VSC8572 0x000704d0
#define PHY_ID_VSC8574 0x000704a0
+#define PHY_ID_VSC8575 0x000707d0
+#define PHY_ID_VSC8582 0x000707b0
#define PHY_ID_VSC8584 0x000707c0
#define MSCC_VDDMAC_1500 1500
@@ -1597,6 +1603,8 @@ static bool vsc8584_is_pkg_init(struct phy_device *phydev, bool reversed)
phy = container_of(map[addr], struct phy_device, mdio);
+ if (!phy)
+ continue;
+
if ((phy->phy_id & phydev->drv->phy_id_mask) !=
(phydev->drv->phy_id & phydev->drv->phy_id_mask))
continue;
@@ -1648,9 +1656,27 @@ static int vsc8584_config_init(struct phy_device *phydev)
*/
if (!vsc8584_is_pkg_init(phydev, val & PHY_ADDR_REVERSED ? 1 : 0)) {
if ((phydev->phy_id & phydev->drv->phy_id_mask) ==
+ (PHY_ID_VSC8504 & phydev->drv->phy_id_mask))
+ ret = vsc8574_config_pre_init(phydev);
+ else if ((phydev->phy_id & phydev->drv->phy_id_mask) ==
+ (PHY_ID_VSC8552 & phydev->drv->phy_id_mask))
+ ret = vsc8574_config_pre_init(phydev);
+ else if ((phydev->phy_id & phydev->drv->phy_id_mask) ==
+ (PHY_ID_VSC856X & phydev->drv->phy_id_mask))
+ ret = vsc8584_config_pre_init(phydev);
+ else if ((phydev->phy_id & phydev->drv->phy_id_mask) ==
+ (PHY_ID_VSC8572 & phydev->drv->phy_id_mask))
+ ret = vsc8574_config_pre_init(phydev);
+ else if ((phydev->phy_id & phydev->drv->phy_id_mask) ==
(PHY_ID_VSC8574 & phydev->drv->phy_id_mask))
ret = vsc8574_config_pre_init(phydev);
else if ((phydev->phy_id & phydev->drv->phy_id_mask) ==
+ (PHY_ID_VSC8575 & phydev->drv->phy_id_mask))
+ ret = vsc8584_config_pre_init(phydev);
+ else if ((phydev->phy_id & phydev->drv->phy_id_mask) ==
+ (PHY_ID_VSC8582 & phydev->drv->phy_id_mask))
+ ret = vsc8584_config_pre_init(phydev);
+ else if ((phydev->phy_id & phydev->drv->phy_id_mask) ==
(PHY_ID_VSC8584 & phydev->drv->phy_id_mask))
ret = vsc8584_config_pre_init(phydev);
else
@@ -2322,6 +2348,32 @@ static int vsc85xx_probe(struct phy_device *phydev)
/* Microsemi VSC85xx PHYs */
static struct phy_driver vsc85xx_driver[] = {
{
+ .phy_id = PHY_ID_VSC8504,
+ .name = "Microsemi GE VSC8504 SyncE",
+ .phy_id_mask = 0xfffffff0,
+ /* PHY_GBIT_FEATURES */
+ .soft_reset = &genphy_soft_reset,
+ .config_init = &vsc8584_config_init,
+ .config_aneg = &vsc85xx_config_aneg,
+ .aneg_done = &genphy_aneg_done,
+ .read_status = &vsc85xx_read_status,
+ .ack_interrupt = &vsc85xx_ack_interrupt,
+ .config_intr = &vsc85xx_config_intr,
+ .did_interrupt = &vsc8584_did_interrupt,
+ .suspend = &genphy_suspend,
+ .resume = &genphy_resume,
+ .probe = &vsc8574_probe,
+ .set_wol = &vsc85xx_wol_set,
+ .get_wol = &vsc85xx_wol_get,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
+ .read_page = &vsc85xx_phy_read_page,
+ .write_page = &vsc85xx_phy_write_page,
+ .get_sset_count = &vsc85xx_get_sset_count,
+ .get_strings = &vsc85xx_get_strings,
+ .get_stats = &vsc85xx_get_stats,
+},
+{
.phy_id = PHY_ID_VSC8514,
.name = "Microsemi GE VSC8514 SyncE",
.phy_id_mask = 0xfffffff0,
@@ -2445,6 +2497,82 @@ static struct phy_driver vsc85xx_driver[] = {
.get_stats = &vsc85xx_get_stats,
},
{
+ .phy_id = PHY_ID_VSC8552,
+ .name = "Microsemi GE VSC8552 SyncE",
+ .phy_id_mask = 0xfffffff0,
+ /* PHY_GBIT_FEATURES */
+ .soft_reset = &genphy_soft_reset,
+ .config_init = &vsc8584_config_init,
+ .config_aneg = &vsc85xx_config_aneg,
+ .aneg_done = &genphy_aneg_done,
+ .read_status = &vsc85xx_read_status,
+ .ack_interrupt = &vsc85xx_ack_interrupt,
+ .config_intr = &vsc85xx_config_intr,
+ .did_interrupt = &vsc8584_did_interrupt,
+ .suspend = &genphy_suspend,
+ .resume = &genphy_resume,
+ .probe = &vsc8574_probe,
+ .set_wol = &vsc85xx_wol_set,
+ .get_wol = &vsc85xx_wol_get,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
+ .read_page = &vsc85xx_phy_read_page,
+ .write_page = &vsc85xx_phy_write_page,
+ .get_sset_count = &vsc85xx_get_sset_count,
+ .get_strings = &vsc85xx_get_strings,
+ .get_stats = &vsc85xx_get_stats,
+},
+{
+ .phy_id = PHY_ID_VSC856X,
+ .name = "Microsemi GE VSC856X SyncE",
+ .phy_id_mask = 0xfffffff0,
+ /* PHY_GBIT_FEATURES */
+ .soft_reset = &genphy_soft_reset,
+ .config_init = &vsc8584_config_init,
+ .config_aneg = &vsc85xx_config_aneg,
+ .aneg_done = &genphy_aneg_done,
+ .read_status = &vsc85xx_read_status,
+ .ack_interrupt = &vsc85xx_ack_interrupt,
+ .config_intr = &vsc85xx_config_intr,
+ .did_interrupt = &vsc8584_did_interrupt,
+ .suspend = &genphy_suspend,
+ .resume = &genphy_resume,
+ .probe = &vsc8584_probe,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
+ .read_page = &vsc85xx_phy_read_page,
+ .write_page = &vsc85xx_phy_write_page,
+ .get_sset_count = &vsc85xx_get_sset_count,
+ .get_strings = &vsc85xx_get_strings,
+ .get_stats = &vsc85xx_get_stats,
+},
+{
+ .phy_id = PHY_ID_VSC8572,
+ .name = "Microsemi GE VSC8572 SyncE",
+ .phy_id_mask = 0xfffffff0,
+ /* PHY_GBIT_FEATURES */
+ .soft_reset = &genphy_soft_reset,
+ .config_init = &vsc8584_config_init,
+ .config_aneg = &vsc85xx_config_aneg,
+ .aneg_done = &genphy_aneg_done,
+ .read_status = &vsc85xx_read_status,
+ .ack_interrupt = &vsc85xx_ack_interrupt,
+ .config_intr = &vsc85xx_config_intr,
+ .did_interrupt = &vsc8584_did_interrupt,
+ .suspend = &genphy_suspend,
+ .resume = &genphy_resume,
+ .probe = &vsc8574_probe,
+ .set_wol = &vsc85xx_wol_set,
+ .get_wol = &vsc85xx_wol_get,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
+ .read_page = &vsc85xx_phy_read_page,
+ .write_page = &vsc85xx_phy_write_page,
+ .get_sset_count = &vsc85xx_get_sset_count,
+ .get_strings = &vsc85xx_get_strings,
+ .get_stats = &vsc85xx_get_stats,
+},
+{
.phy_id = PHY_ID_VSC8574,
.name = "Microsemi GE VSC8574 SyncE",
.phy_id_mask = 0xfffffff0,
@@ -2471,6 +2599,54 @@ static struct phy_driver vsc85xx_driver[] = {
.get_stats = &vsc85xx_get_stats,
},
{
+ .phy_id = PHY_ID_VSC8575,
+ .name = "Microsemi GE VSC8575 SyncE",
+ .phy_id_mask = 0xfffffff0,
+ /* PHY_GBIT_FEATURES */
+ .soft_reset = &genphy_soft_reset,
+ .config_init = &vsc8584_config_init,
+ .config_aneg = &vsc85xx_config_aneg,
+ .aneg_done = &genphy_aneg_done,
+ .read_status = &vsc85xx_read_status,
+ .ack_interrupt = &vsc85xx_ack_interrupt,
+ .config_intr = &vsc85xx_config_intr,
+ .did_interrupt = &vsc8584_did_interrupt,
+ .suspend = &genphy_suspend,
+ .resume = &genphy_resume,
+ .probe = &vsc8584_probe,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
+ .read_page = &vsc85xx_phy_read_page,
+ .write_page = &vsc85xx_phy_write_page,
+ .get_sset_count = &vsc85xx_get_sset_count,
+ .get_strings = &vsc85xx_get_strings,
+ .get_stats = &vsc85xx_get_stats,
+},
+{
+ .phy_id = PHY_ID_VSC8582,
+ .name = "Microsemi GE VSC8582 SyncE",
+ .phy_id_mask = 0xfffffff0,
+ /* PHY_GBIT_FEATURES */
+ .soft_reset = &genphy_soft_reset,
+ .config_init = &vsc8584_config_init,
+ .config_aneg = &vsc85xx_config_aneg,
+ .aneg_done = &genphy_aneg_done,
+ .read_status = &vsc85xx_read_status,
+ .ack_interrupt = &vsc85xx_ack_interrupt,
+ .config_intr = &vsc85xx_config_intr,
+ .did_interrupt = &vsc8584_did_interrupt,
+ .suspend = &genphy_suspend,
+ .resume = &genphy_resume,
+ .probe = &vsc8584_probe,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
+ .read_page = &vsc85xx_phy_read_page,
+ .write_page = &vsc85xx_phy_write_page,
+ .get_sset_count = &vsc85xx_get_sset_count,
+ .get_strings = &vsc85xx_get_strings,
+ .get_stats = &vsc85xx_get_stats,
+},
+{
.phy_id = PHY_ID_VSC8584,
.name = "Microsemi GE VSC8584 SyncE",
.phy_id_mask = 0xfffffff0,
@@ -2500,12 +2676,18 @@ static struct phy_driver vsc85xx_driver[] = {
module_phy_driver(vsc85xx_driver);
static struct mdio_device_id __maybe_unused vsc85xx_tbl[] = {
+ { PHY_ID_VSC8504, 0xfffffff0, },
{ PHY_ID_VSC8514, 0xfffffff0, },
{ PHY_ID_VSC8530, 0xfffffff0, },
{ PHY_ID_VSC8531, 0xfffffff0, },
{ PHY_ID_VSC8540, 0xfffffff0, },
{ PHY_ID_VSC8541, 0xfffffff0, },
+ { PHY_ID_VSC8552, 0xfffffff0, },
+ { PHY_ID_VSC856X, 0xfffffff0, },
+ { PHY_ID_VSC8572, 0xfffffff0, },
{ PHY_ID_VSC8574, 0xfffffff0, },
+ { PHY_ID_VSC8575, 0xfffffff0, },
+ { PHY_ID_VSC8582, 0xfffffff0, },
{ PHY_ID_VSC8584, 0xfffffff0, },
{ }
};
--
2.7.4
Powered by blists - more mailing lists