netdev - Re: [PATCH v6 3/4] dt-bindings: net: broadcom-bluetooth: Add pcm config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 22 Nov 2019 13:34:06 +0100
From:   Marcel Holtmann <marcel@...tmann.org>
To:     Rob Herring <robh@...nel.org>
Cc:     Abhishek Pandit-Subedi <abhishekpandit@...omium.org>,
        Johan Hedberg <johan.hedberg@...il.com>,
        linux-bluetooth <linux-bluetooth@...r.kernel.org>,
        Douglas Anderson <dianders@...omium.org>,
        devicetree <devicetree@...r.kernel.org>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, Ondrej Jirman <megous@...ous.com>,
        Mark Rutland <mark.rutland@....com>,
        Chen-Yu Tsai <wens@...e.org>
Subject: Re: [PATCH v6 3/4] dt-bindings: net: broadcom-bluetooth: Add pcm
 config

Hi Rob,

>> Add documentation for pcm parameters.
>> 
>> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@...omium.org>
>> ---
>> 
>> Changes in v6: None
>> Changes in v5: None
>> Changes in v4: None
>> Changes in v3: None
>> Changes in v2: None
> 
> Really? I'm staring at v2 that looks a bit different.
> 
>> .../bindings/net/broadcom-bluetooth.txt       | 16 ++++++++++
>> include/dt-bindings/bluetooth/brcm.h          | 32 +++++++++++++++++++
>> 2 files changed, 48 insertions(+)
>> create mode 100644 include/dt-bindings/bluetooth/brcm.h
>> 
>> diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
>> index c749dc297624..8561e4684378 100644
>> --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
>> +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
>> @@ -29,10 +29,20 @@ Optional properties:
>>    - "lpo": external low power 32.768 kHz clock
>>  - vbat-supply: phandle to regulator supply for VBAT
>>  - vddio-supply: phandle to regulator supply for VDDIO
>> + - brcm,bt-sco-routing: PCM, Transport, Codec, I2S
>> + - brcm,bt-pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps
>> + - brcm,bt-pcm-frame-type: short, long
>> + - brcm,bt-pcm-sync-mode: slave, master
>> + - brcm,bt-pcm-clock-mode: slave, master
> 
> Little of this seems unique to Broadcom. We already have some standard 
> audio related properties for audio interfaces such as 'format', 
> 'frame-master' and 'bitclock-master'. Ultimately, this would be tied 
> into the audio complex of SoCs and need to work with the audio 
> bindings. We also have HDMI audio bindings. 
> 
> Maybe sco-routing is unique to BT and still needed in some form though 
> if you describe the connection to the SoC audio complex, then maybe 
> not? I'd assume every BT chip has some audio routing configuration.

so we tried to generalize this some time before and failed to get a proper consensus.

In general I am with you that we should just expose generic properties from the attached audio codec, but nobody has come up with anything like that. And I think aligning all chip manufacturers will take some time.

Maybe in the interim we just use brcm,bt-pcm-int-params = [00 00 ..] as initially proposed.

Regards

Marcel