netdev - Re: [PATCH v2 0/2] ARM: dts: ls1021a: define and use external interrupt lines

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Wed, 4 Dec 2019 21:14:07 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Rasmus Villemoes <linux@...musvillemoes.dk>
Cc:     Li Yang <leoyang.li@....com>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Vladimir Oltean <olteanv@...il.com>,
        Marc Zyngier <maz@...nel.org>, netdev@...r.kernel.org,
        Andrew Lunn <andrew@...n.ch>
Subject: Re: [PATCH v2 0/2] ARM: dts: ls1021a: define and use external
 interrupt lines

On Thu, Nov 14, 2019 at 12:02:51PM +0100, Rasmus Villemoes wrote:
> A device tree binding documentation as well as a driver implementing
> support for the external interrupt lines on the ls1021a has been
> merged into irqchip-next, so will very likely appear in v5.5. See
> 
> 87cd38dfd9e6 dt/bindings: Add bindings for Layerscape external irqs
> 0dcd9f872769 irqchip: Add support for Layerscape external interrupt lines
> 
> present in next-20191114.
> 
> These patches simply add the extirq node to the ls1021a.dtsi and make
> use of it on the LS1021A-TSN board. I hope these can be picked up so
> they also land in v5.5, so we don't have to wait a full extra release
> cycle.

Sorry.  I usually send queued patches around -rc6 timeline to my
arm-soc maintainers.  Patches coming later than that will be scheduled
for the next release unless critical fixes.
> 
> v2: fix interrupt type in 2/2 (s/IRQ_TYPE_EDGE_FALLING/IRQ_TYPE_LEVEL_LOW/).
> 
> Rasmus Villemoes (1):
>   ARM: dts: ls1021a: add node describing external interrupt lines
> 
> Vladimir Oltean (1):
>   ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs

Applied both, thanks.