netdev - RE: [PATCH V3 0/6] can: flexcan: fixes for stop mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 9 Dec 2019 08:28:17 +0000
From:   Joakim Zhang <qiangqing.zhang@....com>
To:     Marc Kleine-Budde <mkl@...gutronix.de>,
        "sean@...nix.com" <sean@...nix.com>,
        "linux-can@...r.kernel.org" <linux-can@...r.kernel.org>
CC:     dl-linux-imx <linux-imx@....com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: RE: [PATCH V3 0/6] can: flexcan: fixes for stop mode


> -----Original Message-----
> From: Marc Kleine-Budde <mkl@...gutronix.de>
> Sent: 2019年12月7日 22:11
> To: Joakim Zhang <qiangqing.zhang@....com>; sean@...nix.com;
> linux-can@...r.kernel.org
> Cc: dl-linux-imx <linux-imx@....com>; netdev@...r.kernel.org
> Subject: Re: [PATCH V3 0/6] can: flexcan: fixes for stop mode
> 
> On 12/4/19 12:36 PM, Joakim Zhang wrote:
> > Hi Marc,
> >
> >    I removed the patch (can: flexcan: try to exit stop mode during
> > probe stage) out of this patch set for now. This patch should further
> > discuss with Sean and I will prepare it according to final conclusion. Thanks.
> >
> > Regards,
> > Joakim Zhang
> >
> > Joakim Zhang (5):
> >   can: flexcan: Ack wakeup interrupt separately
> >   can: flexcan: add low power enter/exit acknowledgment helper
> >   can: flexcan: change the way of stop mode acknowledgment
> 
> Above 3 applied to linux-can.
Hi Marc,

From below link, I have not found the patch: can: flexcan: Ack wakeup interrupt separately
https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/log/?h=linux-can-fixes-for-5.5-20191208

> >   can: flexcan: propagate error value of flexcan_chip_stop()
> >   can: flexcan: add LPSR mode support
> 
> Above 2 applied to linux-can-next

I also have not found these two patch on linux-can-next, which branch has you pushed?

Thanks.

Best Regards,
Joakim Zhang
> Marc
> --
> Pengutronix e.K.                 | Marc Kleine-Budde           |
> Embedded Linux                   | https://www.pengutronix.de  |
> Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
> Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |