netdev - Re: [PATCH V3 0/6] can: flexcan: fixes for stop mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Mon, 9 Dec 2019 09:43:10 +0100
From:   Marc Kleine-Budde <mkl@...gutronix.de>
To:     Joakim Zhang <qiangqing.zhang@....com>,
        "sean@...nix.com" <sean@...nix.com>,
        "linux-can@...r.kernel.org" <linux-can@...r.kernel.org>
Cc:     dl-linux-imx <linux-imx@....com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH V3 0/6] can: flexcan: fixes for stop mode

On 12/9/19 9:28 AM, Joakim Zhang wrote:
> 
>> -----Original Message-----
>> From: Marc Kleine-Budde <mkl@...gutronix.de>
>> Sent: 2019年12月7日 22:11
>> To: Joakim Zhang <qiangqing.zhang@....com>; sean@...nix.com;
>> linux-can@...r.kernel.org
>> Cc: dl-linux-imx <linux-imx@....com>; netdev@...r.kernel.org
>> Subject: Re: [PATCH V3 0/6] can: flexcan: fixes for stop mode
>>
>> On 12/4/19 12:36 PM, Joakim Zhang wrote:
>>> Hi Marc,
>>>
>>>    I removed the patch (can: flexcan: try to exit stop mode during
>>> probe stage) out of this patch set for now. This patch should further
>>> discuss with Sean and I will prepare it according to final conclusion. Thanks.
>>>
>>> Regards,
>>> Joakim Zhang
>>>
>>> Joakim Zhang (5):
>>>   can: flexcan: Ack wakeup interrupt separately
>>>   can: flexcan: add low power enter/exit acknowledgment helper
>>>   can: flexcan: change the way of stop mode acknowledgment
>>
>> Above 3 applied to linux-can.
> 
> From below link, I have not found the patch: can: flexcan: Ack wakeup interrupt separately
> https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/log/?h=linux-can-fixes-for-5.5-20191208

Right, "Ack wakeup interrupt separately" went into linux-can-next.

>>>   can: flexcan: propagate error value of flexcan_chip_stop()
>>>   can: flexcan: add LPSR mode support
>>
>> Above 2 applied to linux-can-next
> 
> I also have not found these two patch on linux-can-next, which branch has you pushed?

It's in linux-can-test/testing.

I just pushed both linux-can/testing and linux-can-test/testing.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |



Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)