[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1ifSV8-0000b1-NW@rmk-PC.armlinux.org.uk>
Date: Thu, 12 Dec 2019 17:43:46 +0000
From: Russell King <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Antoine Tenart <antoine.tenart@...tlin.com>,
"David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Subject: [PATCH net-next 3/3] net: mvpp2: update mvpp2 validate()
implementation
Fix up the mvpp2 validate implementation to adopt the same behaviour as
mvneta:
- only allow the link modes that the specified PHY interface mode
supports with the exception of 1000base-X and 2500base-X.
- use the basex helper to deal with SFP modules that can be switched
between 1000base-X vs 2500base-X.
This gives consistent behaviour between mvneta and mvpp2.
This commit depends on "net: phylink: extend clause 45 PHY validation
workaround" so is not marked for backporting to stable kernels.
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 20 +++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 111b3b8239e1..fddd856338b4 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4786,6 +4786,8 @@ static void mvpp2_phylink_validate(struct phylink_config *config,
phylink_set(mask, 10000baseER_Full);
phylink_set(mask, 10000baseKR_Full);
}
+ if (state->interface != PHY_INTERFACE_MODE_NA)
+ break;
/* Fall-through */
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
@@ -4796,13 +4798,21 @@ static void mvpp2_phylink_validate(struct phylink_config *config,
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Half);
phylink_set(mask, 100baseT_Full);
+ if (state->interface != PHY_INTERFACE_MODE_NA)
+ break;
/* Fall-through */
case PHY_INTERFACE_MODE_1000BASEX:
case PHY_INTERFACE_MODE_2500BASEX:
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 1000baseX_Full);
- phylink_set(mask, 2500baseT_Full);
- phylink_set(mask, 2500baseX_Full);
+ if (port->comphy ||
+ state->interface != PHY_INTERFACE_MODE_2500BASEX) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseX_Full);
+ }
+ if (port->comphy ||
+ state->interface == PHY_INTERFACE_MODE_2500BASEX) {
+ phylink_set(mask, 2500baseT_Full);
+ phylink_set(mask, 2500baseX_Full);
+ }
break;
default:
goto empty_set;
@@ -4811,6 +4821,8 @@ static void mvpp2_phylink_validate(struct phylink_config *config,
bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
bitmap_and(state->advertising, state->advertising, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
+
+ phylink_helper_basex_speed(state);
return;
empty_set:
--
2.20.1
Powered by blists - more mailing lists