netdev - [RFC PATCH 0/2] AT8031 PHY timestamping support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200225230819.7325-1-michael@walle.cc>
Date:   Wed, 26 Feb 2020 00:08:17 +0100
From:   Michael Walle <michael@...le.cc>
To:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S . Miller" <davem@...emloft.net>,
        Richard Cochran <richardcochran@...il.com>,
        Michael Walle <michael@...le.cc>
Subject: [RFC PATCH 0/2] AT8031 PHY timestamping support

This patchset is the current state of my work for adding PHY timestamping
support. I just wanted to post this to the mailinglist before I never do
it. Maybe its a starting point for other people. That being said, I
wouldn't mind comments ;) The code basically works but there are three
major caveats:

 (1) The reading of timestamps via MDIO sometimes return wrong values. What
     I see is that a part of the timestamp corresponds to the new timestamp
	 while another part still contains old values. Thus at the moment, I'm
	 reading the registers twice. I don't know if the reading actually
	 affects the update of the timestamp or the different timing (my MDIO
	 bus is rather slow, so reading the timestamp a second time take some
	 amount of time; but I've also tested with some delays and it didn't
	 had any effects). There is also no possibility to read the timestamp
	 atomically :(
 (2) It seems to be the case that the PHY generates an interrupt on every
     PTP message, eg. even if it is not an event message meaning that a new
	 timestamp is ready. Thus we might read the timestamp too often.
 (3) Sometimes the TX timestamp is missing. It seems that in this case the
     PHY doesn't generate an interrupt. If you check for any RX_PTP/TX_PTP
	 interrupt pending and then read both timestamps (remember that
	 get_rxts/get_txts checks that the timestamp has actually changed)
	 it seems to work though.

	   if (mask & (AT8031_INTR_RX_PTP | AT8031_INTR_TX_PTP)) {
			   at8031_get_rxts(phydev);
			   at8031_get_txts(phydev);
	   }

Please note that the patch doesn't contain the code above. Replacing the
IRQ handling with the code make PTP actually work, but I'm not satisfied
with that solution, esp. reading the timestamps multiple times over MDIO.
So currently I'm stuck and unfortunately, I'm not able to get support from
Atheros/our FAE.

The PHY also supports appending the timestamp to the actual ethernet frame,
but this seems to only work when the PHY is connected via RGMII. I've never
get it to work with a SGMII connection.

The first patch might actually be useful outside of this series. See also
  https://lore.kernel.org/netdev/bd47f8e1ebc04fa98856ed8d89b91419@walle.cc/

-michael

Michael Walle (2):
  net: phy: let the driver register its own IRQ handler
  net: phy: at803x: add PTP support for AR8031

 drivers/net/phy/Kconfig      |  17 +
 drivers/net/phy/at803x.c     | 879 ++++++++++++++++++++++++++++++++++-
 drivers/net/phy/phy.c        |  15 +
 drivers/net/phy/phy_device.c |   6 +-
 include/linux/phy.h          |   2 +
 5 files changed, 892 insertions(+), 27 deletions(-)

-- 
2.20.1