netdev - Re: [PATCH net-next v3 0/3] marvell10g tunable and power saving support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 4 Mar 2020 14:44:51 +0100
From:   Antoine Tenart <antoine.tenart@...tlin.com>
To:     Russell King - ARM Linux admin <linux@...linux.org.uk>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Antoine Tenart <antoine.tenart@...tlin.com>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Subject: Re: [PATCH net-next v3 0/3] marvell10g tunable and power saving
 support

Hello Russell,

On Tue, Mar 03, 2020 at 06:07:47PM +0000, Russell King - ARM Linux admin wrote:
> 
> This patch series adds support for:
> - mdix configuration (auto, mdi, mdix)
> - energy detect power down (edpd)
> - placing in edpd mode at probe
> 
> for both the 88x3310 and 88x2110 PHYs.
> 
> Antione, could you test this for the 88x2110 PHY please?

Tested-by: Antoine Tenart <antoine.tenart@...tlin.com>

Thanks!
Antoine

> v3: fix return code in get_tunable/set_tunable
> v2: fix comments from Antione.
> 
>  drivers/net/phy/marvell10g.c | 177 +++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 170 insertions(+), 7 deletions(-)
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
> According to speedtest.net: 11.9Mbps down 500kbps up

-- 
Antoine Ténart, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com