| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200415130833.f3qxzqrmayxqe3dv@pengutronix.de>
Date: Wed, 15 Apr 2020 15:08:33 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Jakub Kicinski <kuba@...nel.org>,
Jonathan Corbet <corbet@....net>,
Michal Kubecek <mkubecek@...e.cz>
Cc: netdev@...r.kernel.org, Russell King <linux@...linux.org.uk>,
linux-kernel@...r.kernel.org, mkl@...gutronix.de,
kernel@...gutronix.de, David Jander <david@...tonic.nl>,
Marek Behun <marek.behun@....cz>
Subject: Re: [PATCH v1] ethtool: provide UAPI for PHY master/slave
configuration.
Here are some examples how it works. Only nxp-tja11xx need additional
patches. Most of other gigabit PHYs: micrel, etheros, realtek ... will work
without patches.
For Broadr-Reach/100Base-T1 PHY (NXP TJA1102):
-------------------------------------------------------------------------------
root@...t:~ ip l s dev t1slave up
[11138.600029] sja1105 spi1.0 t1slave: configuring for phy/rmii link mode
[11138.657649] sja1105 spi1.0 t1slave: Link is Up - 100Mbps/Full - flow control off
[11138.665632] IPv6: ADDRCONF(NETDEV_CHANGE): t1slave: link becomes ready
root@...t:~ ethtool t1slave
Settings for t1slave:
Supported ports: [ ]
Supported link modes: 100baseT1/Full
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 100baseT1/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: off
Port mode: Slave <----- new option shows current port role
Port: MII
PHYAD: 5
Transceiver: external
Supports Wake-on: d
Wake-on: d
Link detected: yes
root@...t:~ ethtool -s t1slave master-slave master
[11228.024190] sja1105 spi1.0 t1slave: Link is Down
[11228.219143] sja1105 spi1.0 t1slave: Link is Up - 100Mbps/Full - flow control off
root@...t:~ ethtool t1slave
Settings for t1slave:
Supported ports: [ ]
Supported link modes: 100baseT1/Full
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 100baseT1/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: off
Port mode: Master <------- the role is changed now
Port: MII
PHYAD: 5
Transceiver: external
Supports Wake-on: d
Wake-on: d
Link detected: yes
root@...t:~
-------------------------------------------------------------------------------
For Micrel KSZ9031 PHY:
-------------------------------------------------------------------------------
root@...t:~ ip l s dev rj45 up
[11681.778197] sja1105 spi1.0 rj45: configuring for phy/rgmii-id link mode
[11691.604875] sja1105 spi1.0 rj45: Link is Up - 1Gbps/Full - flow control off
[11691.611984] IPv6: ADDRCONF(NETDEV_CHANGE): rj45: link becomes ready
root@...t:~ ethtool rj45
Settings for rj45:
Supported ports: [ MII ]
Supported link modes: 10baseT/Full
100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Full
100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: No
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
Port mode: Slave <---- by defaul, in most case we will get slave mode
Port: MII
PHYAD: 2
Transceiver: external
Supports Wake-on: d
Wake-on: d
Link detected: yes
root@...t:~ ethtool -s rj45 master-slave master-force
[11784.481453] sja1105 spi1.0 rj45: Link is Down
[11788.383342] sja1105 spi1.0 rj45: Link is Up - 1Gbps/Full - flow control off
root@...t:~ ethtool rj45
Settings for rj45:
Supported ports: [ MII ]
Supported link modes: 10baseT/Full
100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Full
100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: No
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
Port mode: Master (force) <----- now we have forced Master mode
Port: MII
PHYAD: 2
Transceiver: external
Supports Wake-on: d
Wake-on: d
Link detected: yes
-------------------------------------------------------------------------------
On Wed, Apr 15, 2020 at 02:12:09PM +0200, Oleksij Rempel wrote:
> This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of
> auto-negotiation support, we needed to be able to configure the
> MASTER-SLAVE role of the port manually or from an application in user
> space.
>
> The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to
> force MASTER or SLAVE role. See IEEE 802.3-2018:
> 22.2.4.3.7 MASTER-SLAVE control register (Register 9)
> 22.2.4.3.8 MASTER-SLAVE status register (Register 10)
> 40.5.2 MASTER-SLAVE configuration resolution
> 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14)
> 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32)
>
> The MASTER-SLAVE role affects the clock configuration:
>
> -------------------------------------------------------------------------------
> When the PHY is configured as MASTER, the PMA Transmit function shall
> source TX_TCLK from a local clock source. When configured as SLAVE, the
> PMA Transmit function shall source TX_TCLK from the clock recovered from
> data stream provided by MASTER.
>
> iMX6Q KSZ9031 XXX
> ------\ /-----------\ /------------\
> | | | | |
> MAC |<----RGMII----->| PHY Slave |<------>| PHY Master |
> |<--- 125 MHz ---+-<------/ | | \ |
> ------/ \-----------/ \------------/
> ^
> \-TX_TCLK
>
> -------------------------------------------------------------------------------
>
> Since some clock or link related issues are only reproducible in a
> specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial
> to provide generic (not 100BASE-T1 specific) interface to the user space
> for configuration flexibility and trouble shooting.
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---
> Documentation/networking/ethtool-netlink.rst | 2 +
> drivers/net/phy/phy.c | 3 +-
> drivers/net/phy/phy_device.c | 75 ++++++++++++++++++++
> include/linux/phy.h | 1 +
> include/uapi/linux/ethtool.h | 11 ++-
> include/uapi/linux/ethtool_netlink.h | 1 +
> include/uapi/linux/mii.h | 2 +
> net/ethtool/linkmodes.c | 9 ++-
> 8 files changed, 101 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
> index f1f868479ceb8..83127a6e42b17 100644
> --- a/Documentation/networking/ethtool-netlink.rst
> +++ b/Documentation/networking/ethtool-netlink.rst
> @@ -368,6 +368,7 @@ Kernel response contents:
> ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes
> ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s)
> ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
> + ``ETHTOOL_A_LINKMODES_MASTER_SLAVE`` u8 Master/slave port mode
> ==================================== ====== ==========================
>
> For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask
> @@ -390,6 +391,7 @@ Request contents:
> ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes
> ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s)
> ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
> + ``ETHTOOL_A_LINKMODES_MASTER_SLAVE`` u8 Master/slave port mode
> ==================================== ====== ==========================
>
> ``ETHTOOL_A_LINKMODES_OURS`` bit set allows setting advertised link modes. If
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index d76e038cf2cb5..9f48141f1e701 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -294,7 +294,7 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev,
> phydev->advertising, autoneg == AUTONEG_ENABLE);
>
> phydev->duplex = duplex;
> -
> + phydev->master_slave = cmd->base.master_slave;
> phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
>
> /* Restart the PHY */
> @@ -313,6 +313,7 @@ void phy_ethtool_ksettings_get(struct phy_device *phydev,
>
> cmd->base.speed = phydev->speed;
> cmd->base.duplex = phydev->duplex;
> + cmd->base.master_slave = phydev->master_slave;
> if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
> cmd->base.port = PORT_BNC;
> else
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index c8b0c34030d32..d5edf2bc40e43 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -604,6 +604,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
> dev->asym_pause = 0;
> dev->link = 0;
> dev->interface = PHY_INTERFACE_MODE_GMII;
> + dev->master_slave = PORT_MODE_UNKNOWN;
>
> dev->autoneg = AUTONEG_ENABLE;
>
> @@ -1772,6 +1773,68 @@ int genphy_setup_forced(struct phy_device *phydev)
> }
> EXPORT_SYMBOL(genphy_setup_forced);
>
> +static int genphy_setup_master_slave(struct phy_device *phydev)
> +{
> + u16 ctl = 0;
> +
> + if (!phydev->is_gigabit_capable)
> + return 0;
> +
> + switch (phydev->master_slave) {
> + case PORT_MODE_MASTER:
> + ctl |= CTL1000_PREFER_MASTER;
> + /* fallthrough */
> + case PORT_MODE_SLAVE:
> + /* CTL1000_ENABLE_MASTER is zero */
> + break;
> + case PORT_MODE_MASTER_FORCE:
> + ctl |= CTL1000_AS_MASTER;
> + /* fallthrough */
> + case PORT_MODE_SLAVE_FORCE:
> + ctl |= CTL1000_ENABLE_MASTER;
> + break;
> + case PORT_MODE_UNKNOWN:
> + return 0;
> + default:
> + phydev_warn(phydev, "Unsupported Master/Slave mode\n");
> + return 0;
> + }
> +
> + return phy_modify_changed(phydev, MII_CTRL1000,
> + (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER |
> + CTL1000_PREFER_MASTER), ctl);
> +}
> +
> +static int genphy_read_master_slave(struct phy_device *phydev)
> +{
> + u16 ctl, stat;
> +
> + if (!phydev->is_gigabit_capable)
> + return 0;
> +
> + ctl = phy_read(phydev, MII_CTRL1000);
> + if (ctl < 0)
> + return ctl;
> +
> + stat = phy_read(phydev, MII_STAT1000);
> + if (stat < 0)
> + return stat;
> +
> + if (ctl & CTL1000_ENABLE_MASTER) {
> + if (stat & LPA_1000MSRES)
> + phydev->master_slave = PORT_MODE_MASTER_FORCE;
> + else
> + phydev->master_slave = PORT_MODE_SLAVE_FORCE;
> + } else {
> + if (stat & LPA_1000MSRES)
> + phydev->master_slave = PORT_MODE_MASTER;
> + else
> + phydev->master_slave = PORT_MODE_SLAVE;
> + }
> +
> + return 0;
> +}
> +
> /**
> * genphy_restart_aneg - Enable and Restart Autonegotiation
> * @phydev: target phy_device struct
> @@ -1830,6 +1893,12 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed)
> if (genphy_config_eee_advert(phydev))
> changed = true;
>
> + err = genphy_setup_master_slave(phydev);
> + if (err < 0)
> + return err;
> + else if (err)
> + changed = true;
> +
> if (AUTONEG_ENABLE != phydev->autoneg)
> return genphy_setup_forced(phydev);
>
> @@ -2062,6 +2131,11 @@ int genphy_read_status(struct phy_device *phydev)
> phydev->duplex = DUPLEX_UNKNOWN;
> phydev->pause = 0;
> phydev->asym_pause = 0;
> + phydev->master_slave = PORT_MODE_UNKNOWN;
> +
> + err = genphy_read_master_slave(phydev);
> + if (err < 0)
> + return err;
>
> err = genphy_read_lpa(phydev);
> if (err < 0)
> @@ -2103,6 +2177,7 @@ int genphy_c37_read_status(struct phy_device *phydev)
> phydev->duplex = DUPLEX_UNKNOWN;
> phydev->pause = 0;
> phydev->asym_pause = 0;
> + phydev->master_slave = PORT_MODE_UNKNOWN;
>
> if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
> lpa = phy_read(phydev, MII_LPA);
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index c570e162e05e5..de5f934223069 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -421,6 +421,7 @@ struct phy_device {
> int duplex;
> int pause;
> int asym_pause;
> + int master_slave;
>
> /* Union of PHY and Attached devices' supported link modes */
> /* See ethtool.h for more info */
> diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
> index 2405ab2263779..bcbc44003c823 100644
> --- a/include/uapi/linux/ethtool.h
> +++ b/include/uapi/linux/ethtool.h
> @@ -1659,6 +1659,13 @@ static inline int ethtool_validate_duplex(__u8 duplex)
> return 0;
> }
>
> +/* Port mode */
> +#define PORT_MODE_MASTER 0x00
> +#define PORT_MODE_SLAVE 0x01
> +#define PORT_MODE_MASTER_FORCE 0x02
> +#define PORT_MODE_SLAVE_FORCE 0x03
> +#define PORT_MODE_UNKNOWN 0xff
> +
> /* Which connector port. */
> #define PORT_TP 0x00
> #define PORT_AUI 0x01
> @@ -1850,6 +1857,7 @@ enum ethtool_reset_flags {
> * autonegotiation; 0 if unknown or not applicable. Read-only.
> * @transceiver: Used to distinguish different possible PHY types,
> * reported consistently by PHYLIB. Read-only.
> + * @master_slave: Master or slave port mode.
> *
> * If autonegotiation is disabled, the speed and @duplex represent the
> * fixed link mode and are writable if the driver supports multiple
> @@ -1897,7 +1905,8 @@ struct ethtool_link_settings {
> __u8 eth_tp_mdix_ctrl;
> __s8 link_mode_masks_nwords;
> __u8 transceiver;
> - __u8 reserved1[3];
> + __u8 master_slave;
> + __u8 reserved1[2];
> __u32 reserved[7];
> __u32 link_mode_masks[0];
> /* layout of link_mode_masks fields:
> diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
> index 7e0b460f872c0..e04d47cb5f227 100644
> --- a/include/uapi/linux/ethtool_netlink.h
> +++ b/include/uapi/linux/ethtool_netlink.h
> @@ -185,6 +185,7 @@ enum {
> ETHTOOL_A_LINKMODES_PEER, /* bitset */
> ETHTOOL_A_LINKMODES_SPEED, /* u32 */
> ETHTOOL_A_LINKMODES_DUPLEX, /* u8 */
> + ETHTOOL_A_LINKMODES_MASTER_SLAVE, /* u8 */
>
> /* add new constants above here */
> __ETHTOOL_A_LINKMODES_CNT,
> diff --git a/include/uapi/linux/mii.h b/include/uapi/linux/mii.h
> index 0b9c3beda345b..78eac603a84fb 100644
> --- a/include/uapi/linux/mii.h
> +++ b/include/uapi/linux/mii.h
> @@ -146,11 +146,13 @@
> /* 1000BASE-T Control register */
> #define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
> #define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */
> +#define CTL1000_PREFER_MASTER 0x0400 /* prefer to operate as master */
> #define CTL1000_AS_MASTER 0x0800
> #define CTL1000_ENABLE_MASTER 0x1000
>
> /* 1000BASE-T Status register */
> #define LPA_1000MSFAIL 0x8000 /* Master/Slave resolution failure */
> +#define LPA_1000MSRES 0x4000 /* Master/Slave resolution status */
> #define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */
> #define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */
> #define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */
> diff --git a/net/ethtool/linkmodes.c b/net/ethtool/linkmodes.c
> index 96f20be64553e..dc15b88e64c6a 100644
> --- a/net/ethtool/linkmodes.c
> +++ b/net/ethtool/linkmodes.c
> @@ -27,6 +27,7 @@ linkmodes_get_policy[ETHTOOL_A_LINKMODES_MAX + 1] = {
> [ETHTOOL_A_LINKMODES_PEER] = { .type = NLA_REJECT },
> [ETHTOOL_A_LINKMODES_SPEED] = { .type = NLA_REJECT },
> [ETHTOOL_A_LINKMODES_DUPLEX] = { .type = NLA_REJECT },
> + [ETHTOOL_A_LINKMODES_MASTER_SLAVE] = { .type = NLA_REJECT },
> };
>
> static int linkmodes_prepare_data(const struct ethnl_req_info *req_base,
> @@ -69,6 +70,7 @@ static int linkmodes_reply_size(const struct ethnl_req_info *req_base,
> len = nla_total_size(sizeof(u8)) /* LINKMODES_AUTONEG */
> + nla_total_size(sizeof(u32)) /* LINKMODES_SPEED */
> + nla_total_size(sizeof(u8)) /* LINKMODES_DUPLEX */
> + + nla_total_size(sizeof(u8)) /* LINKMODES_MASTER_SLAVE */
> + 0;
> ret = ethnl_bitset_size(ksettings->link_modes.advertising,
> ksettings->link_modes.supported,
> @@ -119,7 +121,9 @@ static int linkmodes_fill_reply(struct sk_buff *skb,
> }
>
> if (nla_put_u32(skb, ETHTOOL_A_LINKMODES_SPEED, lsettings->speed) ||
> - nla_put_u8(skb, ETHTOOL_A_LINKMODES_DUPLEX, lsettings->duplex))
> + nla_put_u8(skb, ETHTOOL_A_LINKMODES_DUPLEX, lsettings->duplex) ||
> + nla_put_u8(skb, ETHTOOL_A_LINKMODES_MASTER_SLAVE,
> + lsettings->master_slave))
> return -EMSGSIZE;
>
> return 0;
> @@ -248,6 +252,7 @@ linkmodes_set_policy[ETHTOOL_A_LINKMODES_MAX + 1] = {
> [ETHTOOL_A_LINKMODES_PEER] = { .type = NLA_REJECT },
> [ETHTOOL_A_LINKMODES_SPEED] = { .type = NLA_U32 },
> [ETHTOOL_A_LINKMODES_DUPLEX] = { .type = NLA_U8 },
> + [ETHTOOL_A_LINKMODES_MASTER_SLAVE] = { .type = NLA_U8 },
> };
>
> /* Set advertised link modes to all supported modes matching requested speed
> @@ -310,6 +315,8 @@ static int ethnl_update_linkmodes(struct genl_info *info, struct nlattr **tb,
> mod);
> ethnl_update_u8(&lsettings->duplex, tb[ETHTOOL_A_LINKMODES_DUPLEX],
> mod);
> + ethnl_update_u8(&lsettings->master_slave,
> + tb[ETHTOOL_A_LINKMODES_MASTER_SLAVE], mod);
>
> if (!tb[ETHTOOL_A_LINKMODES_OURS] && lsettings->autoneg &&
> (req_speed || req_duplex) &&
> --
> 2.26.0.rc2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists