| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9ac3b37a-8746-b8ee-70e1-9c876830ac83@linaro.org>
Date: Wed, 15 Apr 2020 12:55:21 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: Andrzej Pietrasiewicz <andrzej.p@...labora.com>,
linux-pm@...r.kernel.org
Cc: Zhang Rui <rui.zhang@...el.com>,
"Rafael J . Wysocki" <rjw@...ysocki.net>,
Len Brown <lenb@...nel.org>, Jiri Pirko <jiri@...lanox.com>,
Ido Schimmel <idosch@...lanox.com>,
"David S . Miller" <davem@...emloft.net>,
Peter Kaestle <peter@...e.net>,
Darren Hart <dvhart@...radead.org>,
Andy Shevchenko <andy@...radead.org>,
Support Opensource <support.opensource@...semi.com>,
Amit Kucheria <amit.kucheria@...durent.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Allison Randal <allison@...utok.net>,
Enrico Weigelt <info@...ux.net>,
Gayatri Kammela <gayatri.kammela@...el.com>,
Thomas Gleixner <tglx@...utronix.de>,
linux-acpi@...r.kernel.org, netdev@...r.kernel.org,
platform-driver-x86@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, kernel@...labora.com,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: Re: [RFC v2 5/9] thermal: Store mode in thermal_zone_device
On 14/04/2020 20:01, Andrzej Pietrasiewicz wrote:
> struct thermal_zone_device has a "mode" member now, so use it.
>
> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
At this point, I suggest to not go further with the changes from patch
5-9 but add a new 'mode' field in the struct thermal_zone_params.
And then in the function thermal_zone_device_register()
{
...
if (tzp)
thermal_zone_set_mode(tzp->mode);
...
}
The important thing is to prevent exporting the functions
thermal_zone_device_enable / disable, so they stay in the thermal
framework internals, thus forcing to centralize the control of the
thermal zones from the framework and not from the device drivers.
Temporarly, until the polling is disabled for disabled thermal zones,
the acpi driver can stay in the state it is. It may need special
attention afterwards.
But I believe setting the mode from the register function will help to
clean up a lot of drivers.
> ---
> drivers/acpi/thermal.c | 48 +++++++++----------
> .../ethernet/mellanox/mlxsw/core_thermal.c | 35 ++------------
> drivers/platform/x86/acerhdf.c | 24 ++++------
> drivers/thermal/da9062-thermal.c | 12 +----
> drivers/thermal/imx_thermal.c | 30 +++++-------
> .../intel/int340x_thermal/int3400_thermal.c | 34 +++++--------
> .../thermal/intel/intel_quark_dts_thermal.c | 22 +++------
> drivers/thermal/of-thermal.c | 19 ++------
> 8 files changed, 71 insertions(+), 153 deletions(-)
>
> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> index 328b479ce7f6..755f12b76c20 100644
> --- a/drivers/acpi/thermal.c
> +++ b/drivers/acpi/thermal.c
> @@ -172,7 +172,6 @@ struct acpi_thermal {
> struct acpi_thermal_trips trips;
> struct acpi_handle_list devices;
> struct thermal_zone_device *thermal_zone;
> - int tz_enabled;
> int kelvin_offset; /* in millidegrees */
> struct work_struct thermal_check_work;
> };
> @@ -499,8 +498,14 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
> static void acpi_thermal_check(void *data)
> {
> struct acpi_thermal *tz = data;
> + enum thermal_device_mode mode;
>
> - if (!tz->tz_enabled)
> + /*
> + * this driver does not provide ->get_mode(), so calling
> + * thermal_zone_device_get_mode() always succeeds
> + */
> + thermal_zone_device_get_mode(tz->thermal_zone, &mode);
> + if (mode != THERMAL_DEVICE_ENABLED)
> return;
>
> thermal_zone_device_update(tz->thermal_zone,
> @@ -526,39 +531,33 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
> return 0;
> }
>
> -static int thermal_get_mode(struct thermal_zone_device *thermal,
> - enum thermal_device_mode *mode)
> -{
> - struct acpi_thermal *tz = thermal->devdata;
> -
> - *mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
> - THERMAL_DEVICE_DISABLED;
> -
> - return 0;
> -}
> -
> static int thermal_set_mode(struct thermal_zone_device *thermal,
> enum thermal_device_mode mode)
> {
> struct acpi_thermal *tz = thermal->devdata;
> - int enable;
> + enum thermal_device_mode old_mode;
>
> + if (mode != THERMAL_DEVICE_DISABLED &&
> + mode != THERMAL_DEVICE_ENABLED)
> + return -EINVAL;
> /*
> * enable/disable thermal management from ACPI thermal driver
> */
> - if (mode == THERMAL_DEVICE_ENABLED)
> - enable = 1;
> - else if (mode == THERMAL_DEVICE_DISABLED) {
> - enable = 0;
> + if (mode == THERMAL_DEVICE_DISABLED)
> pr_warn("thermal zone will be disabled\n");
> - } else
> - return -EINVAL;
>
> - if (enable != tz->tz_enabled) {
> - tz->tz_enabled = enable;
> + /*
> + * this driver does not provide ->get_mode(), so calling
> + * thermal_zone_device_get_mode() always succeeds
> + */
> + thermal_zone_device_get_mode(thermal, &old_mode);
> +
> + if (mode != old_mode) {
> + thermal_zone_device_store_mode(thermal, mode);
> ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> "%s kernel ACPI thermal control\n",
> - tz->tz_enabled ? "Enable" : "Disable"));
> + mode == THERMAL_DEVICE_ENABLED ?
> + "Enable" : "Disable"));
> acpi_thermal_check(tz);
> }
> return 0;
> @@ -850,7 +849,6 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
> .bind = acpi_thermal_bind_cooling_device,
> .unbind = acpi_thermal_unbind_cooling_device,
> .get_temp = thermal_get_temp,
> - .get_mode = thermal_get_mode,
> .set_mode = thermal_set_mode,
> .get_trip_type = thermal_get_trip_type,
> .get_trip_temp = thermal_get_trip_temp,
> @@ -907,7 +905,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
> if (ACPI_FAILURE(status))
> return -ENODEV;
>
> - tz->tz_enabled = 1;
> + thermal_zone_device_store_enabled(tz->thermal_zone);
>
> dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
> tz->thermal_zone->id);
> diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> index cd435ca7adbe..c4239b2ba16d 100644
> --- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> +++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> @@ -98,7 +98,6 @@ struct mlxsw_thermal_module {
> struct mlxsw_thermal *parent;
> struct thermal_zone_device *tzdev;
> struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
> - enum thermal_device_mode mode;
> int module; /* Module or gearbox number */
> };
>
> @@ -110,7 +109,6 @@ struct mlxsw_thermal {
> struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX];
> u8 cooling_levels[MLXSW_THERMAL_MAX_STATE + 1];
> struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
> - enum thermal_device_mode mode;
> struct mlxsw_thermal_module *tz_module_arr;
> u8 tz_module_num;
> struct mlxsw_thermal_module *tz_gearbox_arr;
> @@ -277,16 +275,6 @@ static int mlxsw_thermal_unbind(struct thermal_zone_device *tzdev,
> return 0;
> }
>
> -static int mlxsw_thermal_get_mode(struct thermal_zone_device *tzdev,
> - enum thermal_device_mode *mode)
> -{
> - struct mlxsw_thermal *thermal = tzdev->devdata;
> -
> - *mode = thermal->mode;
> -
> - return 0;
> -}
> -
> static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
> enum thermal_device_mode mode)
> {
> @@ -303,7 +291,7 @@ static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
>
> mutex_unlock(&tzdev->lock);
>
> - thermal->mode = mode;
> + thermal_zone_device_store_mode(tzdev, mode);
> thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED);
>
> return 0;
> @@ -409,7 +397,6 @@ static int mlxsw_thermal_trend_get(struct thermal_zone_device *tzdev,
> static struct thermal_zone_device_ops mlxsw_thermal_ops = {
> .bind = mlxsw_thermal_bind,
> .unbind = mlxsw_thermal_unbind,
> - .get_mode = mlxsw_thermal_get_mode,
> .set_mode = mlxsw_thermal_set_mode,
> .get_temp = mlxsw_thermal_get_temp,
> .get_trip_type = mlxsw_thermal_get_trip_type,
> @@ -468,16 +455,6 @@ static int mlxsw_thermal_module_unbind(struct thermal_zone_device *tzdev,
> return err;
> }
>
> -static int mlxsw_thermal_module_mode_get(struct thermal_zone_device *tzdev,
> - enum thermal_device_mode *mode)
> -{
> - struct mlxsw_thermal_module *tz = tzdev->devdata;
> -
> - *mode = tz->mode;
> -
> - return 0;
> -}
> -
> static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev,
> enum thermal_device_mode mode)
> {
> @@ -495,7 +472,7 @@ static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev,
>
> mutex_unlock(&tzdev->lock);
>
> - tz->mode = mode;
> + thermal_zone_device_store_mode(tzdev, mode);
> thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED);
>
> return 0;
> @@ -600,7 +577,6 @@ mlxsw_thermal_module_trip_hyst_set(struct thermal_zone_device *tzdev, int trip,
> static struct thermal_zone_device_ops mlxsw_thermal_module_ops = {
> .bind = mlxsw_thermal_module_bind,
> .unbind = mlxsw_thermal_module_unbind,
> - .get_mode = mlxsw_thermal_module_mode_get,
> .set_mode = mlxsw_thermal_module_mode_set,
> .get_temp = mlxsw_thermal_module_temp_get,
> .get_trip_type = mlxsw_thermal_module_trip_type_get,
> @@ -639,7 +615,6 @@ static int mlxsw_thermal_gearbox_temp_get(struct thermal_zone_device *tzdev,
> static struct thermal_zone_device_ops mlxsw_thermal_gearbox_ops = {
> .bind = mlxsw_thermal_module_bind,
> .unbind = mlxsw_thermal_module_unbind,
> - .get_mode = mlxsw_thermal_module_mode_get,
> .set_mode = mlxsw_thermal_module_mode_set,
> .get_temp = mlxsw_thermal_gearbox_temp_get,
> .get_trip_type = mlxsw_thermal_module_trip_type_get,
> @@ -769,7 +744,7 @@ mlxsw_thermal_module_tz_init(struct mlxsw_thermal_module *module_tz)
> return err;
> }
>
> - module_tz->mode = THERMAL_DEVICE_ENABLED;
> + thermal_zone_device_store_enabled(module_tz->tzdev);
> return 0;
> }
>
> @@ -885,7 +860,7 @@ mlxsw_thermal_gearbox_tz_init(struct mlxsw_thermal_module *gearbox_tz)
> if (IS_ERR(gearbox_tz->tzdev))
> return PTR_ERR(gearbox_tz->tzdev);
>
> - gearbox_tz->mode = THERMAL_DEVICE_ENABLED;
> + thermal_zone_device_store_enabled(gearbox_tz->tzdev);
> return 0;
> }
>
> @@ -1054,7 +1029,7 @@ int mlxsw_thermal_init(struct mlxsw_core *core,
> if (err)
> goto err_unreg_modules_tzdev;
>
> - thermal->mode = THERMAL_DEVICE_ENABLED;
> + thermal_zone_device_store_enabled(thermal->tzdev);
> *p_thermal = thermal;
> return 0;
>
> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
> index d5188c1d688b..e5a6abdf62ca 100644
> --- a/drivers/platform/x86/acerhdf.c
> +++ b/drivers/platform/x86/acerhdf.c
> @@ -65,8 +65,10 @@
>
> #ifdef START_IN_KERNEL_MODE
> static int kernelmode = 1;
> +#define ACERHDF_DEFAULT_MODE THERMAL_DEVICE_ENABLED
> #else
> static int kernelmode;
> +#define ACERHDF_DEFAULT_MODE THERMAL_DEVICE_DISABLED
> #endif
>
> static unsigned int interval = 10;
> @@ -410,18 +412,6 @@ static inline void acerhdf_enable_kernelmode(void)
> pr_notice("kernel mode fan control ON\n");
> }
>
> -static int acerhdf_get_mode(struct thermal_zone_device *thermal,
> - enum thermal_device_mode *mode)
> -{
> - if (verbose)
> - pr_notice("kernel mode fan control %d\n", kernelmode);
> -
> - *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
> - : THERMAL_DEVICE_DISABLED;
> -
> - return 0;
> -}
> -
> /*
> * set operation mode;
> * enabled: the thermal layer of the kernel takes care about
> @@ -435,10 +425,13 @@ static int acerhdf_set_mode(struct thermal_zone_device *thermal,
> mode != THERMAL_DEVICE_ENABLED)
> return -EINVAL;
>
> - if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
> + if (mode == THERMAL_DEVICE_DISABLED && kernelmode) {
> acerhdf_revert_to_bios_mode();
> - else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
> + thermal_zone_device_store_enabled(thermal);
> + } else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode) {
> acerhdf_enable_kernelmode();
> + thermal_zone_device_store_disabled(thermal);
> + }
>
> return 0;
> }
> @@ -492,7 +485,6 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
> .bind = acerhdf_bind,
> .unbind = acerhdf_unbind,
> .get_temp = acerhdf_get_ec_temp,
> - .get_mode = acerhdf_get_mode,
> .set_mode = acerhdf_set_mode,
> .get_trip_type = acerhdf_get_trip_type,
> .get_trip_hyst = acerhdf_get_trip_hyst,
> @@ -757,6 +749,8 @@ static int __init acerhdf_register_thermal(void)
> return -EINVAL;
> }
>
> + thermal_zone_device_store_mode(thz_dev, ACERHDF_DEFAULT_MODE);
> +
> return 0;
> }
>
> diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
> index c32709badeda..279d393bb048 100644
> --- a/drivers/thermal/da9062-thermal.c
> +++ b/drivers/thermal/da9062-thermal.c
> @@ -49,7 +49,6 @@ struct da9062_thermal {
> struct da9062 *hw;
> struct delayed_work work;
> struct thermal_zone_device *zone;
> - enum thermal_device_mode mode;
> struct mutex lock; /* protection for da9062_thermal temperature */
> int temperature;
> int irq;
> @@ -121,14 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> -static int da9062_thermal_get_mode(struct thermal_zone_device *z,
> - enum thermal_device_mode *mode)
> -{
> - struct da9062_thermal *thermal = z->devdata;
> - *mode = thermal->mode;
> - return 0;
> -}
> -
> static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
> int trip,
> enum thermal_trip_type *type)
> @@ -181,7 +172,6 @@ static int da9062_thermal_get_temp(struct thermal_zone_device *z,
>
> static struct thermal_zone_device_ops da9062_thermal_ops = {
> .get_temp = da9062_thermal_get_temp,
> - .get_mode = da9062_thermal_get_mode,
> .get_trip_type = da9062_thermal_get_trip_type,
> .get_trip_temp = da9062_thermal_get_trip_temp,
> };
> @@ -233,7 +223,6 @@ static int da9062_thermal_probe(struct platform_device *pdev)
>
> thermal->config = match->data;
> thermal->hw = chip;
> - thermal->mode = THERMAL_DEVICE_ENABLED;
> thermal->dev = &pdev->dev;
>
> INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
> @@ -248,6 +237,7 @@ static int da9062_thermal_probe(struct platform_device *pdev)
> ret = PTR_ERR(thermal->zone);
> goto err;
> }
> + thermal_zone_device_store_enabled(thermal->zone);
>
> dev_dbg(&pdev->dev,
> "TJUNC temperature polling period set at %d ms\n",
> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> index 36b1924f1938..f3f602b4ece5 100644
> --- a/drivers/thermal/imx_thermal.c
> +++ b/drivers/thermal/imx_thermal.c
> @@ -197,7 +197,6 @@ struct imx_thermal_data {
> struct cpufreq_policy *policy;
> struct thermal_zone_device *tz;
> struct thermal_cooling_device *cdev;
> - enum thermal_device_mode mode;
> struct regmap *tempmon;
> u32 c1, c2; /* See formula in imx_init_calib() */
> int temp_passive;
> @@ -252,11 +251,17 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
> struct imx_thermal_data *data = tz->devdata;
> const struct thermal_soc_data *soc_data = data->socdata;
> struct regmap *map = data->tempmon;
> + enum thermal_device_mode mode;
> unsigned int n_meas;
> bool wait;
> u32 val;
>
> - if (data->mode == THERMAL_DEVICE_ENABLED) {
> + /*
> + * this driver does not provide ->get_mode(), so calling
> + * thermal_zone_device_get_mode() always succeeds
> + */
> + thermal_zone_device_get_mode(tz, &mode);
> + if (mode == THERMAL_DEVICE_ENABLED) {
> /* Check if a measurement is currently in progress */
> regmap_read(map, soc_data->temp_data, &val);
> wait = !(val & soc_data->temp_valid_mask);
> @@ -283,7 +288,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
>
> regmap_read(map, soc_data->temp_data, &val);
>
> - if (data->mode != THERMAL_DEVICE_ENABLED) {
> + if (mode != THERMAL_DEVICE_ENABLED) {
> regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
> soc_data->measure_temp_mask);
> regmap_write(map, soc_data->sensor_ctrl + REG_SET,
> @@ -331,16 +336,6 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
> return 0;
> }
>
> -static int imx_get_mode(struct thermal_zone_device *tz,
> - enum thermal_device_mode *mode)
> -{
> - struct imx_thermal_data *data = tz->devdata;
> -
> - *mode = data->mode;
> -
> - return 0;
> -}
> -
> static int imx_set_mode(struct thermal_zone_device *tz,
> enum thermal_device_mode mode)
> {
> @@ -378,7 +373,7 @@ static int imx_set_mode(struct thermal_zone_device *tz,
> return -EINVAL;
> }
>
> - data->mode = mode;
> + thermal_zone_device_store_mode(tz, mode);
> thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
>
> return 0;
> @@ -469,7 +464,6 @@ static struct thermal_zone_device_ops imx_tz_ops = {
> .bind = imx_bind,
> .unbind = imx_unbind,
> .get_temp = imx_get_temp,
> - .get_mode = imx_get_mode,
> .set_mode = imx_set_mode,
> .get_trip_type = imx_get_trip_type,
> .get_trip_temp = imx_get_trip_temp,
> @@ -833,7 +827,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
> data->socdata->measure_temp_mask);
>
> data->irq_enabled = true;
> - data->mode = THERMAL_DEVICE_ENABLED;
> + thermal_zone_device_store_enabled(data->tz);
>
> ret = devm_request_threaded_irq(&pdev->dev, data->irq,
> imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
> @@ -887,7 +881,7 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
> data->socdata->measure_temp_mask);
> regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
> data->socdata->power_down_mask);
> - data->mode = THERMAL_DEVICE_DISABLED;
> + thermal_zone_device_store_disabled(data->tz);
> clk_disable_unprepare(data->thermal_clk);
>
> return 0;
> @@ -907,7 +901,7 @@ static int __maybe_unused imx_thermal_resume(struct device *dev)
> data->socdata->power_down_mask);
> regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
> data->socdata->measure_temp_mask);
> - data->mode = THERMAL_DEVICE_ENABLED;
> + thermal_zone_device_store_enabled(data->tz);
>
> return 0;
> }
> diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
> index fbb59dd09481..a7d9b42c060d 100644
> --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
> +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
> @@ -44,7 +44,6 @@ static char *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = {
> struct int3400_thermal_priv {
> struct acpi_device *adev;
> struct thermal_zone_device *thermal;
> - int mode;
> int art_count;
> struct art *arts;
> int trt_count;
> @@ -230,42 +229,33 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
> return 0;
> }
>
> -static int int3400_thermal_get_mode(struct thermal_zone_device *thermal,
> - enum thermal_device_mode *mode)
> -{
> - struct int3400_thermal_priv *priv = thermal->devdata;
> -
> - *mode = priv->mode;
> -
> - return 0;
> -}
> -
> static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
> enum thermal_device_mode mode)
> {
> struct int3400_thermal_priv *priv = thermal->devdata;
> - bool enable;
> + enum thermal_device_mode old_mode;
> int result = 0;
>
> - if (mode == THERMAL_DEVICE_ENABLED)
> - enable = true;
> - else if (mode == THERMAL_DEVICE_DISABLED)
> - enable = false;
> - else
> + if (mode != THERMAL_DEVICE_ENABLED &&
> + mode != THERMAL_DEVICE_DISABLED)
> return -EINVAL;
>
> - if (enable != priv->mode) {
> - priv->mode = enable;
> + /*
> + * this driver does not provide ->get_mode(), so calling
> + * thermal_zone_device_get_mode() always succeeds
> + */
> + thermal_zone_device_get_mode(thermal, &old_mode);
> + if (mode != old_mode) {
> + thermal_zone_device_store_mode(thermal, mode);
> result = int3400_thermal_run_osc(priv->adev->handle,
> - priv->current_uuid_index,
> - enable);
> + priv->current_uuid_index,
> + mode == THERMAL_DEVICE_ENABLED);
> }
> return result;
> }
>
> static struct thermal_zone_device_ops int3400_thermal_ops = {
> .get_temp = int3400_thermal_get_temp,
> - .get_mode = int3400_thermal_get_mode,
> .set_mode = int3400_thermal_set_mode,
> };
>
> diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
> index 11d7db895125..6d440ef3055f 100644
> --- a/drivers/thermal/intel/intel_quark_dts_thermal.c
> +++ b/drivers/thermal/intel/intel_quark_dts_thermal.c
> @@ -103,7 +103,6 @@ struct soc_sensor_entry {
> bool locked;
> u32 store_ptps;
> u32 store_dts_enable;
> - enum thermal_device_mode mode;
> struct thermal_zone_device *tzone;
> };
>
> @@ -128,7 +127,7 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
> return ret;
>
> if (out & QRK_DTS_ENABLE_BIT) {
> - aux_entry->mode = THERMAL_DEVICE_ENABLED;
> + thermal_zone_device_store_enabled(tzd);
> return 0;
> }
>
> @@ -139,9 +138,9 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
> if (ret)
> return ret;
>
> - aux_entry->mode = THERMAL_DEVICE_ENABLED;
> + thermal_zone_device_store_enabled(tzd);
> } else {
> - aux_entry->mode = THERMAL_DEVICE_DISABLED;
> + thermal_zone_device_store_disabled(tzd);
> pr_info("DTS is locked. Cannot enable DTS\n");
> ret = -EPERM;
> }
> @@ -161,7 +160,7 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
> return ret;
>
> if (!(out & QRK_DTS_ENABLE_BIT)) {
> - aux_entry->mode = THERMAL_DEVICE_DISABLED;
> + thermal_zone_device_store_disabled(tzd);
> return 0;
> }
>
> @@ -173,9 +172,9 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
> if (ret)
> return ret;
>
> - aux_entry->mode = THERMAL_DEVICE_DISABLED;
> + thermal_zone_device_store_disabled(tzd);
> } else {
> - aux_entry->mode = THERMAL_DEVICE_ENABLED;
> + thermal_zone_device_store_enabled(tzd);
> pr_info("DTS is locked. Cannot disable DTS\n");
> ret = -EPERM;
> }
> @@ -309,14 +308,6 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
> return 0;
> }
>
> -static int sys_get_mode(struct thermal_zone_device *tzd,
> - enum thermal_device_mode *mode)
> -{
> - struct soc_sensor_entry *aux_entry = tzd->devdata;
> - *mode = aux_entry->mode;
> - return 0;
> -}
> -
> static int sys_set_mode(struct thermal_zone_device *tzd,
> enum thermal_device_mode mode)
> {
> @@ -341,7 +332,6 @@ static struct thermal_zone_device_ops tzone_ops = {
> .get_trip_type = sys_get_trip_type,
> .set_trip_temp = sys_set_trip_temp,
> .get_crit_temp = sys_get_crit_temp,
> - .get_mode = sys_get_mode,
> .set_mode = sys_set_mode,
> };
>
> diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
> index 36bebf623980..0f1e134e90ea 100644
> --- a/drivers/thermal/of-thermal.c
> +++ b/drivers/thermal/of-thermal.c
> @@ -51,7 +51,6 @@ struct __thermal_bind_params {
>
> /**
> * struct __thermal_zone - internal representation of a thermal zone
> - * @mode: current thermal zone device mode (enabled/disabled)
> * @passive_delay: polling interval while passive cooling is activated
> * @polling_delay: zone polling interval
> * @slope: slope of the temperature adjustment curve
> @@ -65,7 +64,6 @@ struct __thermal_bind_params {
> */
>
> struct __thermal_zone {
> - enum thermal_device_mode mode;
> int passive_delay;
> int polling_delay;
> int slope;
> @@ -269,16 +267,6 @@ static int of_thermal_unbind(struct thermal_zone_device *thermal,
> return 0;
> }
>
> -static int of_thermal_get_mode(struct thermal_zone_device *tz,
> - enum thermal_device_mode *mode)
> -{
> - struct __thermal_zone *data = tz->devdata;
> -
> - *mode = data->mode;
> -
> - return 0;
> -}
> -
> static int of_thermal_set_mode(struct thermal_zone_device *tz,
> enum thermal_device_mode mode)
> {
> @@ -298,7 +286,7 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
>
> mutex_unlock(&tz->lock);
>
> - data->mode = mode;
> + thermal_zone_device_store_mode(tz, mode);
> thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
>
> return 0;
> @@ -395,7 +383,6 @@ static int of_thermal_get_crit_temp(struct thermal_zone_device *tz,
> }
>
> static struct thermal_zone_device_ops of_thermal_ops = {
> - .get_mode = of_thermal_get_mode,
> .set_mode = of_thermal_set_mode,
>
> .get_trip_type = of_thermal_get_trip_type,
> @@ -556,7 +543,7 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data,
> tzd = thermal_zone_of_add_sensor(child, sensor_np,
> data, ops);
> if (!IS_ERR(tzd))
> - tzd->ops->set_mode(tzd, THERMAL_DEVICE_ENABLED);
> + thermal_zone_device_enable(tzd);
>
> of_node_put(child);
> goto exit;
> @@ -981,7 +968,6 @@ __init *thermal_of_build_thermal_zone(struct device_node *np)
>
> finish:
> of_node_put(child);
> - tz->mode = THERMAL_DEVICE_DISABLED;
>
> return tz;
>
> @@ -1136,6 +1122,7 @@ int __init of_parse_thermal_zones(void)
> of_thermal_free_zone(tz);
> /* attempting to build remaining zones still */
> }
> + thermal_zone_device_store_disabled(zone);
> }
> of_node_put(np);
>
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Powered by blists - more mailing lists