netdev - Re: [PATCH net v2 0/2] Fix 88x3310 leaving power save mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200508213816.GY1551@shell.armlinux.org.uk>
Date:   Fri, 8 May 2020 22:38:16 +0100
From:   Russell King - ARM Linux admin <linux@...linux.org.uk>
To:     Matteo Croce <mcroce@...hat.com>
Cc:     David Miller <davem@...emloft.net>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        netdev <netdev@...r.kernel.org>
Subject: Re: [PATCH net v2 0/2] Fix 88x3310 leaving power save mode

On Fri, May 08, 2020 at 11:32:39PM +0200, Matteo Croce wrote:
> On Wed, Apr 15, 2020 at 1:48 AM David Miller <davem@...emloft.net> wrote:
> >
> > From: Russell King - ARM Linux admin <linux@...linux.org.uk>
> > Date: Tue, 14 Apr 2020 20:47:53 +0100
> >
> > > This series fixes a problem with the 88x3310 PHY on Macchiatobin
> > > coming out of powersave mode noticed by Matteo Croce.  It seems
> > > that certain PHY firmwares do not properly exit powersave mode,
> > > resulting in a fibre link not coming up.
> > >
> > > The solution appears to be to soft-reset the PHY after clearing
> > > the powersave bit.
> > >
> > > We add support for reporting the PHY firmware version to the kernel
> > > log, and use it to trigger this new behaviour if we have v0.3.x.x
> > > or more recent firmware on the PHY.  This, however, is a guess as
> > > the firmware revision documentation does not mention this issue,
> > > and we know that v0.2.1.0 works without this fix but v0.3.3.0 and
> > > later does not.
> >
> > Series applied, thanks.
> >
> 
> Hi,
> 
> should we queue this to -stable?
> The 10 gbit ports don't work without this fix.

It has a "Fixes:" tag, so it should be backported automatically.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up