netdev - Re: [PATCH net-next v1 1/2] ethtool: provide UAPI for PHY Signal Quality Index (SQI)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200520045536.vgeg2p5qt6goqek6@pengutronix.de>
Date:   Wed, 20 May 2020 06:55:36 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Jonathan Corbet <corbet@....net>,
        Michal Kubecek <mkubecek@...e.cz>,
        David Jander <david@...tonic.nl>, kernel@...gutronix.de,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        Russell King <linux@...linux.org.uk>, mkl@...gutronix.de,
        Marek Vasut <marex@...x.de>,
        Christian Herber <christian.herber@....com>
Subject: Re: [PATCH net-next v1 1/2] ethtool: provide UAPI for PHY Signal
 Quality Index (SQI)

On Tue, May 19, 2020 at 03:26:30PM +0200, Andrew Lunn wrote:
> On Tue, May 19, 2020 at 09:51:59AM +0200, Oleksij Rempel wrote:
> > Signal Quality Index is a mandatory value required by "OPEN Alliance
> > SIG" for the 100Base-T1 PHYs [1]. This indicator can be used for cable
> > integrity diagnostic and investigating other noise sources and
> > implement by at least two vendors: NXP[2] and TI[3].
> 
> Hi Oleksij
> 
> With a multi part patch set, please always include a cover note,
> describing what the patchset as a whole does.

ok

> > +int __ethtool_get_sqi(struct net_device *dev)
> > +{
> > +	struct phy_device *phydev = dev->phydev;
> > +
> > +	if (!phydev->drv->get_sqi)
> > +		return -EOPNOTSUPP;
> > +
> > +	return phydev->drv->get_sqi(phydev);
> > +}
> 
> You are not doing any locking here, which you should. Due to modules
> vs built in, it can be a bit tricky getting this right. Take a look at
> how ethtool ioctl.c uses phy_ethtool_get_stats() and that inline
> function itself.

ok.

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)