netdev - Re: [net-next,PATCH 2/4] net: mdio-ipq4019: add clock support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CA+HBbNHbyS3viFc90KDWW=dwkA9yRSuQ15fg9EzApmrP8JSR3Q@mail.gmail.com>
Date:   Fri, 3 Jul 2020 13:37:48 +0200
From:   Robert Marko <robert.marko@...tura.hr>
To:     Florian Fainelli <f.fainelli@...il.com>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King - ARM Linux admin <linux@...linux.org.uk>,
        David Miller <davem@...emloft.net>, kuba@...nel.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        robh+dt@...nel.org
Subject: Re: [net-next,PATCH 2/4] net: mdio-ipq4019: add clock support

On Thu, Jul 2, 2020 at 9:59 PM Florian Fainelli <f.fainelli@...il.com> wrote:
>
>
>
> On 7/2/2020 3:29 AM, Robert Marko wrote:
> > Some newer SoC-s have a separate MDIO clock that needs to be enabled.
> > So lets add support for handling the clocks to the driver.
> >
> > Signed-off-by: Robert Marko <robert.marko@...tura.hr>
> > ---
> >  drivers/net/phy/mdio-ipq4019.c | 28 +++++++++++++++++++++++++++-
> >  1 file changed, 27 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/phy/mdio-ipq4019.c b/drivers/net/phy/mdio-ipq4019.c
> > index 0e78830c070b..7660bf006da0 100644
> > --- a/drivers/net/phy/mdio-ipq4019.c
> > +++ b/drivers/net/phy/mdio-ipq4019.c
> > @@ -9,6 +9,7 @@
> >  #include <linux/iopoll.h>
> >  #include <linux/of_address.h>
> >  #include <linux/of_mdio.h>
> > +#include <linux/clk.h>
> >  #include <linux/phy.h>
> >  #include <linux/platform_device.h>
> >
> > @@ -24,8 +25,12 @@
> >  #define IPQ4019_MDIO_TIMEOUT 10000
> >  #define IPQ4019_MDIO_SLEEP           10
> >
> > +#define QCA_MDIO_CLK_DEFAULT_RATE    100000000
>
> 100MHz? Is not that going to be a tad too much for most MDIO devices out
> there?
This is not the actual MDIO bus clock, that is the clock frequency
that SoC clock generator produces.
MDIO controller has an internal divider set up for that 100MHz, I
don't know the actual MDIO bus clock
frequency as it's not listed anywhere.
> --
> Florian