| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 13 Jul 2020 19:39:26 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Michael Walle <michael@...le.cc>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Alex Marginean <alexandru.marginean@....com>,
Claudiu Manoil <claudiu.manoil@....com>,
Heiko Thiery <heiko.thiery@...il.com>,
Russell King - ARM Linux admin <linux@...linux.org.uk>,
Ioana Ciornei <ioana.ciornei@....com>,
Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>
Subject: Re: [PATCH net-next v6 4/4] net: enetc: Use DT protocol information
to set up the ports
On Thu, Jul 09, 2020 at 11:35:26PM +0200, Michael Walle wrote:
> From: Alex Marginean <alexandru.marginean@....com>
>
> Use DT information rather than in-band information from bootloader to
> set up MAC for XGMII. For RGMII use the DT indication in addition to
> RGMII defaults in hardware.
> However, this implies that PHY connection information needs to be
> extracted before netdevice creation, when the ENETC Port MAC is
> being configured.
>
> Signed-off-by: Alex Marginean <alexandru.marginean@....com>
> Signed-off-by: Claudiu Manoil <claudiu.manoil@....com>
> Signed-off-by: Michael Walle <michael@...le.cc>
> ---
Tested-by: Vladimir Oltean <vladimir.oltean@....com>
> .../net/ethernet/freescale/enetc/enetc_pf.c | 57 ++++++++++---------
> .../net/ethernet/freescale/enetc/enetc_pf.h | 3 +
> 2 files changed, 34 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> index 662740874841..dfc3acc841df 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
> @@ -482,7 +482,8 @@ static void enetc_port_si_configure(struct enetc_si *si)
> enetc_port_wr(hw, ENETC_PSIVLANFMR, ENETC_PSIVLANFMR_VS);
> }
>
> -static void enetc_configure_port_mac(struct enetc_hw *hw)
> +static void enetc_configure_port_mac(struct enetc_hw *hw,
> + phy_interface_t phy_mode)
> {
> enetc_port_wr(hw, ENETC_PM0_MAXFRM,
> ENETC_SET_MAXFRM(ENETC_RX_MAXFRM_SIZE));
> @@ -498,9 +499,11 @@ static void enetc_configure_port_mac(struct enetc_hw *hw)
> ENETC_PM0_CMD_TXP | ENETC_PM0_PROMISC |
> ENETC_PM0_TX_EN | ENETC_PM0_RX_EN);
> /* set auto-speed for RGMII */
> - if (enetc_port_rd(hw, ENETC_PM0_IF_MODE) & ENETC_PMO_IFM_RG)
> + if (enetc_port_rd(hw, ENETC_PM0_IF_MODE) & ENETC_PMO_IFM_RG ||
> + phy_interface_mode_is_rgmii(phy_mode))
> enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_RGAUTO);
> - if (enetc_global_rd(hw, ENETC_G_EPFBLPR(1)) == ENETC_G_EPFBLPR1_XGMII)
> +
> + if (phy_mode == PHY_INTERFACE_MODE_USXGMII)
> enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_XGMII);
> }
>
> @@ -524,7 +527,7 @@ static void enetc_configure_port(struct enetc_pf *pf)
>
> enetc_configure_port_pmac(hw);
>
> - enetc_configure_port_mac(hw);
> + enetc_configure_port_mac(hw, pf->if_mode);
>
> enetc_port_si_configure(pf->si);
>
> @@ -776,27 +779,27 @@ static void enetc_mdio_remove(struct enetc_pf *pf)
> mdiobus_unregister(pf->mdio);
> }
>
> -static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
> +static int enetc_of_get_phy(struct enetc_pf *pf)
> {
> - struct enetc_pf *pf = enetc_si_priv(priv->si);
> - struct device_node *np = priv->dev->of_node;
> + struct device *dev = &pf->si->pdev->dev;
> + struct device_node *np = dev->of_node;
> struct device_node *mdio_np;
> int err;
>
> - priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
> - if (!priv->phy_node) {
> + pf->phy_node = of_parse_phandle(np, "phy-handle", 0);
> + if (!pf->phy_node) {
> if (!of_phy_is_fixed_link(np)) {
> - dev_err(priv->dev, "PHY not specified\n");
> + dev_err(dev, "PHY not specified\n");
> return -ENODEV;
> }
>
> err = of_phy_register_fixed_link(np);
> if (err < 0) {
> - dev_err(priv->dev, "fixed link registration failed\n");
> + dev_err(dev, "fixed link registration failed\n");
> return err;
> }
>
> - priv->phy_node = of_node_get(np);
> + pf->phy_node = of_node_get(np);
> }
>
> mdio_np = of_get_child_by_name(np, "mdio");
> @@ -804,15 +807,15 @@ static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
> of_node_put(mdio_np);
> err = enetc_mdio_probe(pf);
> if (err) {
> - of_node_put(priv->phy_node);
> + of_node_put(pf->phy_node);
> return err;
> }
> }
>
> - err = of_get_phy_mode(np, &priv->if_mode);
> + err = of_get_phy_mode(np, &pf->if_mode);
> if (err) {
> - dev_err(priv->dev, "missing phy type\n");
> - of_node_put(priv->phy_node);
> + dev_err(dev, "missing phy type\n");
> + of_node_put(pf->phy_node);
> if (of_phy_is_fixed_link(np))
> of_phy_deregister_fixed_link(np);
> else
> @@ -824,14 +827,14 @@ static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
> return 0;
> }
>
> -static void enetc_of_put_phy(struct enetc_ndev_priv *priv)
> +static void enetc_of_put_phy(struct enetc_pf *pf)
> {
> - struct device_node *np = priv->dev->of_node;
> + struct device_node *np = pf->si->pdev->dev.of_node;
>
> if (np && of_phy_is_fixed_link(np))
> of_phy_deregister_fixed_link(np);
> - if (priv->phy_node)
> - of_node_put(priv->phy_node);
> + if (pf->phy_node)
> + of_node_put(pf->phy_node);
> }
>
> static int enetc_imdio_init(struct enetc_pf *pf, bool is_c45)
> @@ -994,6 +997,10 @@ static int enetc_pf_probe(struct pci_dev *pdev,
> pf->si = si;
> pf->total_vfs = pci_sriov_get_totalvfs(pdev);
>
> + err = enetc_of_get_phy(pf);
> + if (err)
> + dev_warn(&pdev->dev, "Fallback to PHY-less operation\n");
> +
> enetc_configure_port(pf);
>
> enetc_get_si_caps(si);
> @@ -1008,6 +1015,8 @@ static int enetc_pf_probe(struct pci_dev *pdev,
> enetc_pf_netdev_setup(si, ndev, &enetc_ndev_ops);
>
> priv = netdev_priv(ndev);
> + priv->phy_node = pf->phy_node;
> + priv->if_mode = pf->if_mode;
>
> enetc_init_si_rings_params(priv);
>
> @@ -1023,10 +1032,6 @@ static int enetc_pf_probe(struct pci_dev *pdev,
> goto err_alloc_msix;
> }
>
> - err = enetc_of_get_phy(priv);
> - if (err)
> - dev_warn(&pdev->dev, "Fallback to PHY-less operation\n");
> -
> err = enetc_configure_serdes(priv);
> if (err)
> dev_warn(&pdev->dev, "Attempted SerDes config but failed\n");
> @@ -1040,7 +1045,6 @@ static int enetc_pf_probe(struct pci_dev *pdev,
> return 0;
>
> err_reg_netdev:
> - enetc_of_put_phy(priv);
> enetc_free_msix(priv);
> err_alloc_msix:
> enetc_free_si_resources(priv);
> @@ -1048,6 +1052,7 @@ static int enetc_pf_probe(struct pci_dev *pdev,
> si->ndev = NULL;
> free_netdev(ndev);
> err_alloc_netdev:
> + enetc_of_put_phy(pf);
> err_map_pf_space:
> enetc_pci_remove(pdev);
>
> @@ -1068,7 +1073,7 @@ static void enetc_pf_remove(struct pci_dev *pdev)
>
> enetc_imdio_remove(pf);
> enetc_mdio_remove(pf);
> - enetc_of_put_phy(priv);
> + enetc_of_put_phy(pf);
>
> enetc_free_msix(priv);
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
> index 2cb922b59f46..0d0ee91282a5 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
> @@ -46,6 +46,9 @@ struct enetc_pf {
> struct mii_bus *mdio; /* saved for cleanup */
> struct mii_bus *imdio;
> struct phy_device *pcs;
> +
> + struct device_node *phy_node;
> + phy_interface_t if_mode;
> };
>
> int enetc_msg_psi_init(struct enetc_pf *pf);
> --
> 2.20.1
>
Powered by blists - more mailing lists